£3,778.80 inc VAT
£3,211.98 inc VAT
£2,676.65 exc VAT

Cream of the Crop

Competitive and scalable; the Raise3D Pro2 improves upon its award-winning predecessor and provides the next generation of performance.

A cube-shaped printer packed up with industrial grade components being ready...

Call our expert advisors to get a tailored solution on 01257 228411 or add this product for a personalised quote

Raise3D Pro2

Cream of the Crop

A cube-shaped printer packed up with industrial grade components
being ready for short-run manufacturing. Coping with the most geometries,
this printer runs incessantly while handling the strongest materials. A toiler, set
to integrate a print factory.

Reconditioned 3D Printers

All our reconditioned 3D printers come with lifetime support via phone/email - the same as all of our other machines. Reconditioned 3D Printers are ex-loan/demo machines, they may have slight cosmetic imperfections but are fully working and tested in 3DGBIRE HQ repair centre. Every reconditioned 3D Printer is refurbished to the manufacturer's high standards and tested by the certified trained technical experts at 3DGBIRE. All of the reconditioned printers come with a six-month warranty.

Finding new paths for flexible manufacturing

Features summary

Electronic Driven Dual Extrusion with Retracting Hot Ends

Prints complex mechanical parts, supports a variety of multi-material filaments and improves print speed.

  • High repeatability (<0.005mm, 5 micron)
  • Lightning speed (<1 second switching time)
  • 1.5mm lifting distance, compatible with flexible filaments
  • High reliability (tested >100,000 times)
  • Intuitive User Experience

  • 7-inch Touch Screen
  • Visual interface / Rapid reviewing / Visual print progress / Full adjustment control
  • Next Generation Motion Controller

    Best in class reliability / Precise voltage control / Silky smooth movement / Superior thermal performance

  • 400MHz ARM Cortex-M7 32bit RISC FPU
  • Industrial grade components
  • Stand-alone motor driver
  • 256 micro-steps driver system
  • New Extruder with Filament Run-out Sensor

    Effortless, Dependable and Accurate with optical run-out sensors and end stops

  • Better grip: Dual gear driven
  • No slipping: 4× increased torque performance
  • Worry free prints: Optical run-out sensor
  • HEPA Air Filtration

  • Environmentally friendly
  • Designed to silently remove nano-particles
  • Build Plate System

    Excellent warping prevention / Even heat distribution / Longer lifetime / Easy to remove

  • Aerospace grade material
  • High temperature silicone heating bed
  • Magnetically-held aluminium bed
  • Improved 4+9 points lock system
  • Buy Now

    Technical specifications

    Print technology Fused filament fabrication (FFF)
    Build Volume (W×D×H) Single Extrusion Print: 12×12×11.8 in / 305×305×300 mm
    Dual Extrusion Print: 11×12×11.8 in / 280×305×300 mm
    Machine Size: 24.4×23.2×29.9 in / 620×590×760 mm
    Print Head Dual-head with electronic lifting system
    Filament Diameter 1.75mm
    XYZ Step Size 0.78125, 0.78125, 0.078125 micron
    Print Head Travel Speed 30-150 mm/s
    Build Plate Heated aluminum build plate with magnetic holding
    Max Build Plate Temperature 110 ºC
    Heated Bed Material Silicone
    Build Plate Leveling Pre-calibrated leveling
    Supported Materials PLA / ABS / HIPS / PC / TPU / TPE / NYLON / PETG / ASA / PP / PVA / Glass Fiber Infused / Carbon Fiber Infused / Metal Fill / Wood Fill
    Nozzle Diameter 0.4 mm (Default), 0.2/ 0.6/ 0.8/ 1.0 mm (Available)
    Max Nozzle Temperature 300 ºC
    Connectivity Wi-Fi, LAN, USB port, Live camera
    Noise Emission (Acoustic) <50 dB(A) when building
    Operating Ambient Temperature 15-30 ºC, 10-90% RH non-condensing
    Storage Temperature -25℃ to +55℃, 10-90% RH non-condensing
    Technical Certifications CB, CE, FCC, RoHS
    Power Supply Input 100-240V AC, 50/60Hz 230V @3.3A
    Power Supply Output 24V DC, 600 W
    Power Supply Input 100-240V AC, 50/60Hz 230V @3.3A
    Power Supply Output 24V DC, 600 W
    Slicing Software ideaMaker
    Supported File Types STL/ OBJ/ 3MF
    Supported OS WINDOWS/ macOS/ LINUX
    Machine Code Type GCODE
    User Interface 7-inch Touch Screen
    Network Wi-Fi, Ethernet
    Resume Print after Power Outage Firmware recording, no need for battery installation. Protection from any condition
    Screen Resolution 1024*600
    Motion Controller ARM Cortex M7.400MHZ FPU
    Logic Controller Freescale i.MX6, Quad core 1Ghz ARM processor
    Memory 1GB
    Onboard Flash 8GB
    OS Embedded Linux
    Ports USB 2.0*2, Ethernet*1
    Training Our courses are designed to take you from complete novice to an expert user of 3D Printers, 3D Scanners, Software and materials. Being able to install, operate and solve technical issues without the need for a technician. Training is available online or via our dedicated technical team for more information see our training options.
    3DGBIRE 6 month warranty and lifetime support All the parts, except the hot end, come with a 6 month warranty. 3DGBIRE will also offers lifetime support through email and phone. Our manufacturer trained technical staff have plenty of knowledge to help you out when you're in need.
    Lifetime support Expert technical support via email, phone, or from our global community is available to you for the lifetime of your printer. How can we help you?.
    Raise3D Community Their very active community of experts share a range of useful tips and tricks, also any troubleshooting and are collectively a great place for networking. The helpful and engaging community is welcoming, it is an experience you need to be a part! Join now.
    Raise3D Pro2 Manual The Raise3D Pro2 Quick Start Guide will show you how easy it is to get started and produce great quality prints. See Here.

    Raise3D Pro2 Filament

    View all Raise3D Pro2 Filament

    Official Pro Training From UK Experts

    Our training packages will take you from a complete novice to a 3D printing expert. Don't get left behind

    1 Hour Skype Training FREE


    3DGBIRE offer a complimentary 1 Hour Skype Training Voucher with all 3D Printers. Please give us a call/ email to book in with one of our 3D Experts.

    The Skype training covers: 1 to 1 technical Introduction with one of our Technical support team and FAQ.
    For setup and Unboxing, Please see out youtube Videos here https://www.youtube.com/channel/UCu06XnpsxxPLxEcg-r3E68Q/featured

    2 Hour Skype Training £200 Exc VAT


    The course covers: Set Up, Workflow, Maintenance, Troubleshooting and is packed full of great tips to ensure your first few weeks and months with your 3D printer are productive and don’t become frustrating

    Half Day Certified Training* £800 Exc VAT including expenses


    Modules:

  • Installation Training
  • Hardware
  • Software
  • Materials
  • Scanning
  • Troubleshooting

  • Hardware Training

  • Calibrations
  • Use Case Analysis
  • Maximising Output
  • Connectivity
  • Maintenance

  • Materials Training

  • Standard Materials
  • Industrial Materials
  • Profiling New Materials
  • Bed Adhesion / Warping
  • Post-Processing Techniques
  • Troubleshooting
  • Software Training

  • Design for 3D printing
  • Design for Large Format 3D Printing
  • CAD to Slicer
  • CAM to Slicer
  • Workflow
  • Exporting Models for 3D Printing
  • CAD
  • CAM
  • Troubleshooting
  • Please note while we try to conduct the training as soon as possible we advise a 14 day lead time for training delivery, please contact one of our advisors for more details

    Become a certified, proficient user of any of the technologies that we sell with our Half Day Training. Maximise the potential of your 3D Printer, 3D Scanner or Software with one of our trained professionals.

    *This price is for Training at our HQ in Lancashire, we can do on-site training where additional charges apply. Please speak to one of our team for a quote.

    Full Day Certified Training* £1500 Exc VAT including expenses


    Modules:

  • Installation Training
  • Hardware
  • Software
  • Materials
  • Scanning
  • Troubleshooting

  • Hardware Training

  • Calibrations
  • Use Case Analysis
  • Maximising Output
  • Connectivity
  • Maintenance

  • Materials Training

  • Standard Materials
  • Industrial Materials
  • Profiling New Materials
  • Bed Adhesion / Warping
  • Post-Processing Techniques
  • Troubleshooting
  • Software Training

  • Design for 3D printing
  • Design for Large Format 3D Printing
  • CAD to Slicer
  • CAM to Slicer
  • Workflow
  • Exporting Models for 3D Printing
  • CAD
  • CAM
  • Troubleshooting
  • Please note while we try to conduct the training as soon as possible we advise a 14 day lead time for training delivery, please contact one of our advisors for more details

    Become a certified advanced user of our technologies with our Full Day Training. Push the boundaries of what is possible with your 3D printer or scanner.

    *This price is for Training at our HQ in Lancashire, we can do on-site training where additional charges apply. Please speak to one of our team for a quote.

    Case Studies

    Discover how 3D Printing is used to build Race Car Simulators

    Review Section

    Why 3DGBIRE

    3D Printers and Accessories


    As one of the largest 3D printing distributor in the UK & Ireland we sell some of the most advanced printers from leading industry manufactures. Not only printers we also supply cleaning kits, filaments etc…

    Buy Now

    Spare parts


    We stock all spare parts and pieces for Ultimaker and Photoscentric 3D Printers. If there is a part or piece you can not find on our website, contact us and we most likely have it in stock...


    Buy Now

    Training


    Our courses are designed to take you from complete novice to an expert user of 3D Printers, 3D Scanners, Software and materials. Being able to install, operate and solve technical issues without the need for a technician...

    Click Here

    Support


    Whatever your problem maybe we can are always ready to help we have a dedicated support team to help you install, print and keep your machine in top tip shape…

    Contact Us
    Just added to your wishlist:
    My Wishlist
    You've just added this product to the cart:
    Go to cart page