Skip to content
Raise3D Pro2 Plus 3D Printer | Reconditioned
£5,398.80 £2,399.99 Inc VAT
£4,499.00 £1,999.99 Exc VAT
Competitive and scalable; the Raise3D Pro2 Plus improves upon its award-winning predecessor and provides the next generation of performance. Read more
Training Options
Request a Quote
Call our expert advisors to get a tailored solution on 01257 228411 or add this product for a personalised quote
Raise3D Pro2 Plus
Cream of the Crop
Competitive and scalable; the Raise3D Pro2 Plus improves upon its award-winning predecessor and provides the next generation of performance.
A cube-shaped printer packed up with industrial grade components being ready for short-run manufacturing. Coping with the most geometries, this printer runs incessantly while handling the strongest materials. A toiler, set to integrate a print factory.
Reconditioned 3D Printers
All our reconditioned 3D printers come with lifetime support via phone/email - the same as all of our other machines. Reconditioned 3D Printers are ex-loan/demo machines, they may have slight cosmetic imperfections but are fully working and tested in 3DGBIRE HQ repair centre. Every reconditioned 3D Printer is refurbished to the manufacturer's high standards and tested by the certified trained technical experts at 3DGBIRE. All of the reconditioned printers come with a six-month warranty.
Finding new paths for flexible manufacturing
Features summary
Electronic Driven Dual Extrusion with Retracting Hot Ends
Prints complex mechanical parts, supports a variety of multi-material filaments and improves print speed.
- High repeatability (<0.005mm, 5 micron)
- Lightning speed (<1 second switching time)
- 1.5mm lifting distance, compatible with flexible filaments
- High reliability (tested ＞100,000 times)
Intuitive User Experience
- 7-inch Touch Screen
- Visual interface / Rapid reviewing / Visual print progress / Full adjustment control
Next Generation Motion Controller
Best in class reliability / Precise voltage control / Silky smooth movement / Superior thermal performance
- 400MHz ARM Cortex-M7 32bit RISC FPU
- Industrial grade components
- Stand-alone motor driver
- 256 micro-steps driver system
New Extruder with Filament Run-out Sensor
Effortless, Dependable and Accurate with optical run-out sensors and end stops
- Better grip: Dual gear driven
- No slipping: 4× increased torque performance
- Worry free prints: Optical run-out sensor
HEPA Air Filtration
- Environmentally friendly
- Designed to silently remove nano-particles
Build Plate System
Excellent warping prevention / Even heat distribution / Longer lifetime / Easy to remove
- Aerospace grade material
- High temperature silicone heating bed
- Magnetically-held aluminium bed
- Improved 4+9 points lock system
Technical specifications
| Print technology | Fused filament fabrication (FFF) |
|---|---|
| Build Volume (W×D×H) | Single Extrusion Print: 12×12×23.8 in / 305×305×605 mm Dual Extrusion Print: 11×12×23.8 in / 280×305×605 mm Machine Size: 24.4×23.2×43.5 in / 620×590×1105 mm |
| Print Head | Dual-head with electronic lifting system |
| Filament Diameter | 1.75mm |
| XYZ Step Size | 0.78125, 0.78125, 0.078125 micron |
| Print Head Travel Speed | 30-150 mm/s |
| Build Plate | Heated aluminum build plate with magnetic holding |
| Max Build Plate Temperature | 110 ºC |
| Heated Bed Material | Silicone |
| Build Plate Leveling | Pre-calibrated leveling |
| Supported Materials | PLA / ABS / HIPS / PC / TPU / TPE / NYLON / PETG / ASA / PP / PVA / Glass Fiber Infused / Carbon Fiber Infused / Metal Fill / Wood Fill |
| Nozzle Diameter | 0.4 mm (Default), 0.2/ 0.6/ 0.8/ 1.0 mm (Available) |
| Max Nozzle Temperature | 300 ºC |
| Connectivity | Wi-Fi, LAN, USB port, Live camera |
| Noise Emission (Acoustic) | <50 dB(A) when building |
| Operating Ambient Temperature | 15-30 ºC, 10-90% RH non-condensing |
| Storage Temperature | -25℃ to +55℃, 10-90% RH non-condensing |
| Technical Certifications | CB, CE, FCC, RoHS |
| Power Supply Input | 100-240V AC, 50/60Hz 230V @3.3A |
|---|---|
| Power Supply Output | 24V DC, 600 W |
| Slicing Software | ideaMaker |
|---|---|
| Supported File Types | STL/ OBJ/ 3MF |
| Supported OS | WINDOWS/ macOS/ LINUX |
| Machine Code Type | GCODE |
| User Interface | 7-inch Touch Screen |
|---|---|
| Network | Wi-Fi, Ethernet |
| Resume Print after Power Outage | Firmware recording, no need for battery installation. Protection from any condition |
| Screen Resolution | 1024*600 |
| Motion Controller | ARM Cortex M7.400MHZ FPU |
| Logic Controller | Freescale i.MX6, Quad core 1Ghz ARM processor |
| Memory | 1GB |
| Onboard Flash | 8GB |
| OS | Embedded Linux |
| Ports | USB 2.0*2, Ethernet*1 |
| Training | Our courses are designed to take you from complete novice to an expert user of 3D Printers, 3D Scanners, Software and materials. Being able to install, operate and solve technical issues without the need for a technician. Training is available online or via our dedicated technical team for more information see our training options. | |
|---|---|---|
| 3DGBIRE 6 month warranty and lifetime support | All the parts, except the hot end, come with a 6 month warranty. 3DGBIRE will also offers lifetime support through email and phone. Our manufacturer trained technical staff have plenty of knowledge to help you out when you're in need. | |
| Lifetime support | Expert technical support via email, phone, or from our global community is available to you for the lifetime of your printer. How can we help you?. | |
| Raise3D Community | Their very active community of experts share a range of useful tips and tricks, also any troubleshooting and are collectively a great place for networking. The helpful and engaging community is welcoming, it is an experience you need to be a part! Join now. | |
| Raise3D Pro2 Manual | The Raise3D Pro2 Quick Start Guide will show you how easy it is to get started and produce great quality prints. Join now. |
Book a Consultation
We're here to answer your questions
Implementing a new technology can be a painful experience, slowing down your core business and not returning results immediately.
Let our team take your headaches away, our knowledge of integrating 3D printing into different industries and applications is second to none.
We’d love to hear about your project and help you find the right solution.
Official Pro Training From UK Experts for Raise3D 3D Printers
Our training packages will take you from a complete novice to a 3D printing expert. Don't get left behind
Raise3D Training
Our courses are designed to take you from complete novice to an expert user of 3D Printers, 3D Scanners, Software and materials. Being able to install, operate and solve technical issues without the need for a technician.
View OptionsCase Studies
Team Dynamics
3D Printing BTCC Car Parts
We paid a visit to Team Dynamics Motorsport and their Raise 3D Pro 2 Plus. Team Dynamics have been printing a number of parts for their Honda Type R BTTC including air intakes, bonnet louvers, break duct blanks, supports, turning vanes and much more...
CXC Racing Simulations
Discover how 3D Printing is used to build Race Car Simulators
WCXC Racing Simulations builds high-end professional-grade training devices for the performance automotive industry. With the aid of 3D printing, they are able to produce high quality parts in-house for prototyping and final use. In this video, we join Founder and CEO Chris Considine to talk about how 3D printing with Raise3D has shaped the racing industry.
Review Section
Book a Live Demonstration
Why 3DGBIRE?
3D Printers and Accessories
As one of the largest 3D printing distributors in the UK & Ireland, we sell some of the most advanced printers from leading industry manufacturers. Not only do we have top-of-the-range 3D printers, we also supply cleaning kits, filaments and accessories etc…
Buy NowSpare parts
We stock all spare parts and pieces for a range of advanced 3D Printers. If there is a part or piece you can not find on our website, don't hesitate to contact us, as we most likely will have it in stock...
Buy Now
Training
Our courses are designed to take you from complete novice to an expert user of 3D Printers, 3D Scanners, Software and materials. Being able to install, operate and solve technical issues without the need for a technician...
Click HereSupport
Whatever your problem, big or small, we are always ready to help as we have a dedicated support team to help you install, print and keep your machine in tip-top shape…
Contact Us