Kodak ABS Orange | 1.75mm | 750g
Kodak ABS Orange | 1.75mm | 750g
£17.99
ex. VAT
ex. VAT
£21.59
inc. VAT
was
Description
PLA+ is an improved version of PLA, suitable for replacing ABS in many aspects. It provides great visual quality and has very low shrinkage and warp. It has the high impact resistance of ABS. Its impact resistance is up to nine times that of regular PLA. It has fast crystallization, which enables printing without support and with very fine detail. Ideal for high resolution or fast printing.
Benefits
- Ideal ABS substitute for many tasks.
- Very low shrinkage.
Main applications:
Architecture and concept modeling.
Technical Specification
Recommended printer settings
| Print temperature: | 205 +/- 5 °C. |
|---|---|
| Print bed temperature: | 60°C. |
| Fans: | on. |
| Closed environment: | not required. |
Tolerance
|
Diameter |
Diameter tolerance |
Roundness accuracy |
Moisture content |
|
1.75 mm |
+/- 0.02 mm |
99% |
< 0.02% |
|
2.85 mm |
+/- 0.03 mm |
Physical properties
|
Description |
Value |
Test method |
|
Density |
1.24 g/cm3 |
ISO 1183/B |
|
Melt Mass-Flow Rate (MFR) (200ᵒC/21.6kg) |
8 g/10 min |
ASTM 1238 |
