You have no items in your shopping cart.
COVID-19 Update - We are continuing to operate as usual during this period. However, there is an increased demand for certain products that are being used to aid the national response to this emergency. This may lead to a delay in our usual delivery times for those products.
The 3D filament Kimya PETG-S is produced via copolymerization with PET. Polyethylene terephtalate glycol (PETG) is a saturated polyester polymer. It offers a perfect balance between flexibility and mechanical resistance and enables items to be...
Call our expert advisors to get a tailored solution on 01257 228411 or add this product for a personalised quote
The 3D filament Kimya PETG-S is produced via copolymerization with PET. Polyethylene terephtalate glycol (PETG) is a saturated polyester polymer. It offers a perfect balance between flexibility and mechanical resistance and enables items to be produced with higher translucidity. Manufacturers use PETG to produce bottles, food containers, credit cards and loyalty cards. The 3D filament Kimya PETG-S has the following properties:
The PETG-S offers the perfect compromise between flexibility and mechanical resistance. Finally, it's not sensitive to moisture and therefore offers good adhesion between layers. Bright colors and polychrome One of the advantages of PETG-S is its choice of colors available for vivid and multicolored 3D prints. This 3D filament is the first Kimya filament available in translucent color (red, yellow, blue, green and black).
|Diameter||INS-6712||1.75 ± 0.1 mm
2.85 ± 0.1 mm
|Density||ISO 1183-1||1.274 g/cm3|
|Moisture rate||INS-6711||< 1 %|
|Melt flow index (MFI)||ISO 1133-1 (@225°C – 2.16 kg)||12.1 g/10min|
|Melting Temperature (Tm)||ISO 11357-1 DSC (10°C/min - 20-300°C)||80 °C|
|Printing Speed||50 mm/s|
|Infill||100% - rectilinear|
|Tensile modulus||ISO 527-2/5A/50||1,833 MPa|
|Tensile Strength||ISO 527-2/5A/50||46.6 MPa|
|Tensile strain at strength||ISO 527-2/5A/50||3.3 %|
|Tensile Stress at Break||ISO 527-2/5A/50||11.1 MPa|
|Tensile strain at break||ISO 527-2/5A/50||24.3 %|
|Flexural modulus||ISO 178||1,641 MPa|
|Flexural stress at conventional deflection (3,5% strain)*||ISO 178||57.5 MPa|
|Charpy impact resistance||ISO 179-1/1eA||4 kJ/m²|
|Shore Hardness||ISO 868||72.5D|
|Description||LE FILAMENT PETG-S offre un équilibre parfait entre flexibilité et résistance mécanique.|
|Highlight||Flexibility & Strong|
|Highlight 2||Interlayer Adhesion|
|Highlight 3||Low Water Absorption|
|Highlight 4||Food Contact Compliant|