Our New 3D Printing Service is Now Available!Go to 3D AMPS
£55.08 inc VAT
£45.90 exc VAT

There is a 14 day lead time on this product

The Kimya PETG Carbon 3D filament is a mixture of PETG and carbon fibers. The addition of carbon fibers to PETG provides high levels of mechanical performance. Thanks to its rigidity, the PETG Carbon is...

Call our expert advisors to get a tailored solution on 01257 228411 or add this product for a personalised quote

The Kimya PETG Carbon 3D filament is a mixture of PETG and carbon fibers. The addition of carbon fibers to PETG provides high levels of mechanical performance. Thanks to its rigidity, the PETG Carbon is highly valued in the production of special parts, notably in the paramedical and automotive fields. The Kimya PETG Carbon 3D filament has the following properties:

  • High rigidity
  • Improve ratio between: Ease of printing / Rigidity
  • Complies with the REACH standard

FILAMENT PROPERTIES

PROPERTIES TEST METHODS VALUES
Density ISO 1183-1 1.28 g/cm3
Moisture rate INS-6711 < 10 %
Melt flow index (MFI) ISO 1133-1 (@225°C – 2.16 kg) 9.7 g/10min
Glass transition temperature (Tg) ISO 11357-1 DSC (10°C/min - 20-300°C) 76 °C

PRINT PARAMETERS AND SPECIMENS DIMENSIONS

PRINTING DIRECTION XY
Printing Speed 40-70 mm/s
Infill 100% - rectilinear
Infill Angle 45°/-45°
Nozzle Temperature 220-260°C
Bed T° 60-100°C

PRINTED SPECIMENS PROPERTIES

PROPERTIES TEST METHODS VALUES
MECHANICAL PROPERTIES
Tensile modulus ISO 527-2/5A/50 4,541 MPa
Tensile Strength ISO 527-2/5A/50 52.9 MPa
Tensile strain at strength ISO 527-2/5A/50 2.4 %
Tensile Stress at Break ISO 527-2/5A/50 41.3 MPa
Tensile strain at break ISO 527-2/5A/50 2.6 %
Flexural modulus ISO 178 2,648 MPa
Flexural stress at conventional deflection (3,5% strain)* ISO 178 80.4 MPa
Flexural stress at break ISO 178 80 MPa
Charpy impact resistance ISO 179-1/1eA 4.1 kJ/m²
Shore Hardness ISO 868 75D

Note 1 *According to ISO 178, end of the test at 5% deformation even if there is no specimen break.

Note 2 The data should be considered as indicative values - Properties can be influenced by production conditions.

  • Print speed: 40-70 mm/s
  • Extrusion temperature: 220-260°C
  • Platform temperature: 60-100°C
Highlight No Delamination
Highlight 2 High Rigidity
Highlight 3 Reinforcment
Highlight 4 Post-printing Processes Possible
Spool Material PC
Steaming Temperature 65°C
Steaming Duration 2h-4h
Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page