Our New 3D Printing Service is Now Available!Go to 3D AMPS
£84.00 inc VAT
£70.00 exc VAT

Technical filament from polyamide modified for 3D-printing in FFF with additional carbon fibers. The carbon fibers reduce the shrinkage and the warping behaviour extremely.

Material Properties

Material shows superior strength with remaining impact resistance. Recommended...

Call our expert advisors to get a tailored solution on 01257 228411 or add this product for a personalised quote

Technical filament from polyamide modified for 3D-printing in FFF with additional carbon fibers. The carbon fibers reduce the shrinkage and the warping behaviour extremely.

Material Properties

Material shows superior strength with remaining impact resistance. Recommended for all high-strength parts with good heat- and media resistance.

  • Printed parts show an attractive matte surface finish.
  • Printed parts with thin wall layers can become very flexible under high humidity intake - in this case we recommend F3 PA-CF Lite.
  • The material differs from F3 PA-CF Lite in higher tensile strength, better printability and more sensitivity towards moisture.
  • The stiffness of the filament should be considered for the pipes and the feeder system of the printer to avoid breaking.

Mechanical properties

Density g/ cm³ 1,25
Modulus of Elasticity printed specimen MPa (N/mm²) 14400
Tensile strength printed specimen x-y (+ 45°/-45°) MPa (N/mm²) 85
Tensile strength printed specimen x-y (0°) MPa (N/mm²) 120
Tensile strength printed specimen x-y (90°) MPa (N/mm²) 40
Tensile stress printed specimen x-y (0°) MPa (N/mm²) 112,73
Elongation printed specimen (0°) % 0,98
Flexural modulus printed specimen (+ 45°/-45°) GPa (kN/mm²) 4,78
Impact strength printed specimen x-y (+ 45°/-45°)(Charpy) kJ/m² 47
Shore hardness --- --

Thermal properties

Glass transition temp. °C 68
Heat distortion temp. (HDT) °C 120

Data Sheets

Download Technical Data Sheet

Download Safety Data Sheet

The Material has been tested on following printers:

Printer F3 PA-CF Pro F3 PA-GF Pro F3 PA Pure Pro F3 PA-CF Lite F3 PA Pure Pro
3NTR A2/A4 x x x x x
Evo-Tech Evolizer EL-102 x x x x x
Hage3D 84L/140L x x x x x
Multec M500/M800 x x x x x
Prusa I3 MK3S x x x
Raise3D N2/N2+ (Bondtech-upgrade) x x x x x
Raise3D Pro2/Pro2+ x x x
Ultimaker S5/S3 x x x x x
Zortrax M200 Plus x x
Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page