Our New 3D Printing Service is Now Available!Go to 3D AMPS
£166.80 inc VAT
£139.00 exc VAT

Technical filament from polyamide modified for 3D-printing in FFF with additional carbon fibers.

Material Properties

  • The carbon fibers reduce the shrinkage and the warping behaviour extremely. Material shows excellent strength with remaining impact resistance.
  • ...

Call our expert advisors to get a tailored solution on 01257 228411 or add this product for a personalised quote

Technical filament from polyamide modified for 3D-printing in FFF with additional carbon fibers.

Material Properties

  • The carbon fibers reduce the shrinkage and the warping behaviour extremely. Material shows excellent strength with remaining impact resistance.
  • Recommended for all parts with good heat- and media resistance where light weight or high strength matters.
  • Printed parts show an excellent matte surface finish.
  • The material differs in the print process from F3 PA-CF Pro in reduced moisture sensitivity and need for much more heat intake in the hotend for proper layer adhesion.
  • The stiffness of the filament should be considered for the pipes and the feeder system of the printer to avoid breaking.

Mechanical properties

Density g/ cm³ 1,24
Modulus of Elasticity printed specimen MPa (N/mm²) 11500
Tensile strength printed specimen x-y (+ 45°/-45°) MPa (N/mm²) 65
Tensile strength printed specimen x-y (0°) MPa (N/mm²) 90
Tensile strength printed specimen x-y (90°) MPa (N/mm²) 30
Tensile stress printed specimen x-y (0°) MPa (N/mm²) --
Elongation printed specimen (0°) % --
Flexural modulus printed specimen (+ 45°/-45°) GPa (kN/mm²) 4,12
Impact strength printed specimen x-y (+ 45°/-45°)(Charpy) kJ/m² 35
Shore hardness --- --

Thermal properties

Glass transition temp. °C 87
Heat distortion temp.(HDT) °C 90

Data Sheets

Download Technical Data Sheet

Download Safety Data Sheet

The Material has been tested on following printers:

Printer F3 PA-CF Pro F3 PA-GF Pro F3 PA Pure Pro F3 PA-CF Lite F3 PA Pure Pro
3NTR A2/A4 x x x x x
Evo-Tech Evolizer EL-102 x x x x x
Hage3D 84L/140L x x x x x
Multec M500/M800 x x x x x
Prusa I3 MK3S x x x
Raise3D N2/N2+ (Bondtech-upgrade) x x x x x
Raise3D Pro2/Pro2+ x x x
Ultimaker S5/S3 x x x x x
Zortrax M200 Plus x x
Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page