Black Friday Offers - 10% OFF All Filaments - Extra 5% OFF Reconditioned Printers - FREE Delivery* View All Offers
We’re open for business

COVID-19 Update - We are continuing to operate as usual during this period. However, there is an increased demand for certain products that are being used to aid the national response to this emergency. This may lead to a delay in our usual delivery times for those products.

£45.59 inc VAT
£37.99 exc VAT

There is a 1-2 week lead time on this product

PET-G (Polyethylene terephthalate glycol-modified) is a polyester thermoplastic characterised by a good balance of tensile strength and elongation at break.

Its high resistance to water and chemicals makes it the material of choice for water-tight...

Call our expert advisors to get a tailored solution on 01257 228411 or add this product for a personalised quote

PET-G (Polyethylene terephthalate glycol-modified) is a polyester thermoplastic characterised by a good balance of tensile strength and elongation at break.

Its high resistance to water and chemicals makes it the material of choice for water-tight containers and protective cases.

PET-G is a versatile technical material, as easy to print as PLA, but with an improved balance of mechanical, chemical and thermal properties.

Applications

  • Parts in contact with salts, acids and alkalis
  • Functional prototypes and mechanical parts
  • Waterproof applications
  • Structural parts subject to mild stress
  • Snap-fit joints
  • Commonly used in beverage bottles
  • Good balance of strength and ductility

    PET-G parts are as strong as those made with PLA but offer a better mechanical profile. PET-G is not brittle, which means that it will not snap abruptly if pulled or bended, on the contrary, it will progressively bend and stretch until reaching it maximum elongation limit of 23%.

    Properties

  • Resistance to corrosive chemicals
  • Good balance of strength, impact resistance and elongation at break
  • Great dimensional stability and toughness
  • Good glossy surface quality
  • Good abrasion resistance
  • Water and moisture barrier
  • Withstand operating temperatures up to 70°C
  • Low rate of ultrafine particles (UFP) and volatile organic compounds (VOC)
  • Compatible with PVA supports
  • Data Sheets

    Download Technical Data Sheet

    Download Safety Data Sheet

    Extruder temp 240° C - 260° C
    Cooling fan 0-25%
    Min. layer height 0.1-0.2mm
    Bed temp. 90° C
    Speed 40-80mm/s

    For BCN3D Cura users:

    Get a proper printing profile for PET-G using the ones integrated into the BCN3D Cura. Download the latest version of BCN3D Cura.

    Bed adhesion:

    To ensure good bed adhesion use Magigoo.

    Recommendations:

    Enclosure is recommended for BCN3D Sigma and Sigmax printers.

    Just added to your wishlist:
    My Wishlist
    You've just added this product to the cart:
    Go to cart page