Skip to content
Meet the Raise3D T450
Print larger prototypes and tooling with the Raise3D T450. Explore its 450 × 350 × 400 mm build volume and TwinFlow single-nozzle dual extrusion.
450 × 350 × 400
Build volume · mm
420°C
Maximum nozzle temperature
70°C
Maximum heated chamber temperature
TwinFlow™
Two feed paths · one nozzle
Why Choose the T450?
Explore the extrusion, motion, temperature management and material delivery systems behind large-part printing.
TwinFlow extrusion
Two filament paths converge at a single nozzle. Choose the material mode and print profile for your application.
Four-motor motion system
See the motion system in operation, designed to support controlled movement during large prints.
Temperature management
Air Flow Manager thermal management supports material-specific printing workflows.
Filament loading and feeding
A closer look at spool mounting and filament insertion for print preparation.
What Can You Make with the T450?
Create prototypes, jigs, fixtures and tooling. Choose the material and part orientation to suit the geometry and working conditions.
Housing Prototypes
Evaluate the shape, fit and assembly of large housings before moving to production
Detailed Structural Samples
Explore complex fins, thin walls and repeated features when developing functional part designs.
Jigs & Fixtures
Create positioning and assembly fixtures tailored to the geometry of your parts and production workflow.
Software & Connectivity
A clear workflow from preparing your model to starting and monitoring your print.
01
Prepare & Slice
Prepare your model and select suitable print settings in ideaMaker.
02
Transfer Your File
Choose a file-transfer method supported by your software and printer configuration.
03
Print & Monitor
Start the prepared file on the T450 and follow the print’s progress.
See the Printing & Finishing Process
Follow the sample from printing through removal and manual support cleanup. Results depend on the material, geometry and print settings.
Printing process
The part is built layer by layer, with the model and support structures developing together during the print. Plan the orientation, support strategy and material settings in ideaMaker before starting the job.
Before support cleanup
After printing, support structures remain around overhangs and recessed features. Let the part and build surface cool before removal, then identify the support contact areas that need to be cleared.
Support removal
Remove the support structures to reveal the printed geometry, working carefully around thin walls, openings and edges. The tools and cleanup approach depend on the part geometry and support material.
Surface and edge detail
Inspect the cleaned part’s openings, edges and support contact areas before checking fit or function. Surface finish depends on layer height, material and support settings; some applications may require additional finishing.
Materials & Compatibility
Choose from Hyper Speed, Industrial and Premium filaments. Match the filament, nozzle, support material and ideaMaker profile to your application.
Hyper Speed
PLA, PLA Pro, ABS, PETG CF and PET CF.
Industrial
Available: PPA CF, PET Support and PPS CF.
Coming soon: PPA GF, PET CF, PET GF, PETG ESD and PPA Support.
Premium
Available: PLA, ABS, ASA, PETG and TPU-95A.
Coming soon: PVA+.
Technical Specifications
| Category | Specification | Raise3D T450 |
|---|---|---|
| Printer Body | Build Volume (W × D × H) | 450 × 350 × 400 mm (17.7 × 13.8 × 15.8 inch) |
| Machine Size (W × D × H) | 710 × 635 × 785 mm (28.0 × 25.0 × 30.9 inch) | |
| Maximum External Package Dimensions (W × D × H) | 880 × 772 × 1076 mm (34.7 × 30.4 × 42.4 inch) | |
| Weight |
Net Weight: 75.9 kg (167.3 lbs) Gross Weight (Carton Only): 80 kg (176.4 lbs) Gross Weight (Carton with Pallet): 98.2 kg (216.5 lbs) |
|
| Frame Material | Aerospace-grade Aluminum Alloy | |
| Extrusion | Print Technology | Fused Filament Fabrication (FFF) |
| Print Head System | TwinFlow™ (Dual-Extrusion with Single-Nozzle Y-Junction Manifold) | |
| Print Mode | Single Extrusion; Dual Extrusion, Dual Extrusion High Flow | |
| Nozzle Diameter | 0.4 mm (Default), 0.6 mm (Available) | |
| Nozzle Type | High Thermal Conductivity CuCrZr Base Nozzle with Solid Wear-Resistant SiC Tip | |
| Max Nozzle Temperature | 420°C | |
| Filament Diameter | 1.75 mm | |
| Layer Height | 0.2 mm (0.4 mm nozzle) | |
| Printing Precision | IT11 Grade† | |
| Speed | Max Printing Speed | 600 mm/s |
| Max Speed of Toolhead | 1,500 mm/s* | |
| Max Acceleration of Toolhead | 30,000 mm/s² | |
| Max Flow for Hotend TwinFlow™ (Dual Extrusion) | 80 mm³/s** | |
| Build Plate and Heated Bed | Build Plate | Flexible Double-sided PEI Build Plate |
| Build Plate Leveling | Mesh-leveling with Flatness Detection | |
| Heated Bed Material | Silicone Heater Pad | |
| Max Build Plate Temperature | 120°C | |
| Chamber Temperature Control | Active Chamber Heating | Available |
| Max Chamber Heating Temperature | 70°C | |
| Electric Top Cover | Available | |
| Auxiliary Heat Dissipation Module | Available | |
| Filter | HEPA Filter with Activated Charcoal | |
| Printing Environment | Operating Ambient Temperature | 15–30°C, 10–90% RH non-condensing |
| Storage Temperature | -25°C to +55°C, 10–90% RH non-condensing | |
| Electrical | Power Supply |
T450 (220V): 200–240VAC, 50/60Hz, 230V@10A T450 (110V): 100–120VAC, 50/60Hz, 110V@15A |
| Material | Raise3D Material |
Hyper Speed: PLA / PLA Pro / ABS / PETG CF / PET CF Industrial: PPA CF / PET Support / PPS CF Premium: PLA / ABS / ASA / PETG / TPU-95A Coming Soon: Industrial: PPA GF / PET CF / PET GF / PETG ESD / PPA Support Premium: PVA+ |
| Software | Slicing Software | ideaMaker |
| Supported File Types | STL / OBJ / 3MF / OLTP / STEP / STP / IGES / IGS | |
| Supported OS | Windows / macOS / Linux | |
| Machine Code Type | GCODE | |
| Sensor and Camera | Live Camera Resolution | 1920 × 1080 |
| Nozzle Camera Resolution | 2592 × 1944 | |
| Filament Run-out Sensor | Available | |
| Power Loss Recovery | Available | |
| Flow Rate Detection | Available | |
| Spaghetti Detection | Available | |
| Nozzle Clumping Detection | Available | |
| Connectivity and Network | Connectivity | Wi-Fi, LAN, USB port, Live Camera |
| Ports | USB 3.0 × 1, Ethernet × 1 | |
| Network | Wi-Fi, Ethernet | |
| Wi-Fi Protocol | WPA / WPA2 / WPA3-PSK | |
| Printer Controller | User Interface | 7-inch Touch Screen |
| Screen Resolution | 1024 × 600 | |
| Motion Controller | STM ARM Cortex-M7 550MHz DP-FPU | |
| Logic Controller | RK ARM Cortex-A55 Quad 2 GHz | |
| Memory | 2 GB | |
| Onboard Flash | 32 GB | |
| OS | Debian | |
| Electric Door Lock | Available | |
| Computing Power | Up to 1 TOPS (INT8), Supporting Mixed Precision | |
|
* Test parameters: Obtained at a Max Acceleration of Toolhead of 10,000 mm/s². ** Test parameters: Raise3D Hyper Speed ABS V2, 250°C printing temperature, 0.4 mm nozzle, a single outer wall smooth structure. † Test filament: Raise3D Premium PLA. |
||
Book a Live Demonstration
Why 3DGBIRE?
3D Printers and Accessories
As one of the largest 3D printing distributors in the UK & Ireland, we sell some of the most advanced printers from leading industry manufacturers. Not only do we have top-of-the-range 3D printers, we also supply cleaning kits, filaments and accessories etc…
Buy NowSpare parts
We stock all spare parts and pieces for a range of advanced 3D Printers. If there is a part or piece you can not find on our website, don't hesitate to contact us, as we most likely will have it in stock...
Buy Now
Training
Our courses are designed to take you from complete novice to an expert user of 3D Printers, 3D Scanners, Software and materials. Being able to install, operate and solve technical issues without the need for a technician...
Click HereSupport
Whatever your problem, big or small, we are always ready to help as we have a dedicated support team to help you install, print and keep your machine in tip-top shape…
Contact Us