- Description
- Technical Specifaction
- Ultimaker Material Alliance
Description
PLACTIVE AN1 €š¾ is an innovative Nanocomposite developed with a
high quality PLA and a patented, scientifically validated and highly
effective Nano-Copper additive.
- Antibacterial action has been scientifically validated eliminating more than 99.99% of fungi, viruses, bacteria and a wide range of microorganisms.
- Clinically tested in prosthesis for amputees with excellent results. Ideal for the manufacture of other medical applications where it's dangerous to have bacterial contamination, such as postoperative prostheses, wound dressing and surgical equipment.
- Antibacterial properties confirmed by two microbiology laboratories in Chile and USA.
- PLACTIVE €š¾ is a FDA Registered Material and EU compliant (No. 10/2011, No. 1935/2004 and No. 2023/2006).
- The manufacturer also has certification ISO 9001/2015 and is REACH compliant.
- The Nano-Additive mantains all the mechanical properties of the material
- It has thermoforming characteristics that facilitates post-processing and final adjustments of the 3D printed application.
- Non-toxic product and environmentally friendly (biodegradable).
Technical Specifaction
PRINTING TEMP. 190 - 210 °C
PRINTING SPEED 40 - 50 MM/SEG
LAYER HEIGHT 0.1 MM
PRINT BED TEMP. ± 0 - 60 °C
Physical Properties | PLACTIVE TM | ASIM Method |
Specific Gravity, g/cc | 1.24 | D792 |
MFR, g/10 min(2) | 6 | D1238 |
Relative Viscosity(3) | 4 | D5225 |
Clarity | Transparent | - |
Peak Melt Temperature, °C | 145-160 | D3418 |
Glass Transition Temperature, °C | 55-60 | D3418 |
Mechanical Property | ||
Tensile Yield Strength, psi (MPa) | 8700 (60) | D882 |
Tensile Strength at Break, psi (MPa) | 7700 (53) | D882 |
Tensile Modulus, psi (MPa) | 524,000 (3.6) | D882 |
Tensile Elongation, % | 6 | D882 |
Notched Izod Impact, ft-lb/in (J/m) | 0.3 (16) | D256 |
Flexural Strength, psi (MPa) | 12,000 (83) | D790 |
Flexural Modulus, psi (MPa) | 555,000 (3.8) | D790 |
Heat Distortion Temperature, °C 66 psi (0.45 MPa) | 55 | E2092 |
Ultimaker Material Alliance
Choosing the right material is critical to the success of your 3D print. Ultimaker's open filament system lets you print with any 2.85 mm filament, and print profiles from the Ultimaker Marketplace streamline print preparation and maximize your print success rate.
Find out more