Skip to content
- Description
- Technical Information
- Printers
Description
Technical filament from polyamide modified for 3D-printing in FFF.
- Filament for FFF-printers with major PA 6 content
- 15 weight-% glass fiber
- high tensile strength; moderate water absorption
- low warping effect
- excellent adhesion to various print plates
- bone white surface finish
Material Properties
The glass fibers reduce the shrinkage and the warping behaviour extremely. Material shows excellent strength with remaining impact resistance.
Recommended for all high strength parts with good heat- and media resistance.
Printed parts show a rough matte surface finish.
The material differs from F3 PA-CF Pro in lower tensile strength. The fibers are not electricallly conductive and therefore an alternative for carbon fibers .
The high stiffness of the filament should be considered for the pipes and the feeder system of the printer to avoid breaking.
Technical Information
Mechanical properties
| Density | g/ cm³ | 1,27 |
| Modulus of Elasticity printed specimen | MPa (N/mm²) | 5560 |
| Tensile strength printed specimen x-y (+ 45°/-45°) | MPa (N/mm²) | 80 |
| Tensile strength printed specimen x-y (0°) | MPa (N/mm²) | 90 |
| Tensile strength printed specimen x-y (90°) | MPa (N/mm²) | 40 |
| Tensile stress printed specimen x-y (0°) | MPa (N/mm²) | 89,68 |
| Elongation printed specimen (0°) | % | 1,98 |
| Flexural modulus printed specimen (+ 45°/-45°) | GPa (kN/mm²) | 3,08 |
| Impact strength printed specimen x-y (+ 45°/-45°)(Charpy) | kJ/m² | -- |
| Shore hardness | --- | -- |
Thermal properties
| Glass transition temp. | °C | 65 |
| Heat distortion temp.(HDT) | °C | 90 |
Data Sheets
Printers
The Material has been tested on following printers:
| Printer | F3 PA-CF Pro | F3 PA-GF Pro | F3 PA Pure Pro | F3 PA-CF Lite | F3 PA Pure Pro |
| 3NTR A2/A4 | x | x | x | x | x |
| Evo-Tech Evolizer EL-102 | x | x | x | x | x |
| Hage3D 84L/140L | x | x | x | x | x |
| Multec M500/M800 | x | x | x | x | x |
| Prusa I3 MK3S | x | x | x | ||
| Raise3D N2/N2+ (Bondtech-upgrade) | x | x | x | x | x |
| Raise3D Pro2/Pro2+ | x | x | x | ||
| Ultimaker S5/S3 | x | x | x | x | x |
| Zortrax M200 Plus | x | x |
