Skip to content
- Description
- Post Processing Instructions
- Thermal Properties
- Recommended Processing Conditions
Description
Soluble Support Material - Dissolvable in our LAVA PROTEOS HT is Soluble support material for filament extrusion for supporting high temperature materials such as PEEK, ULTEM AM1010F, PPSU at build room temperatures up to 210 °C. Works with LAVA "the remover" to dissolve the PROTEOS HT. LAVA is a safe solution to dissolve the support printed in PROTEOS HT. Enables geometry complexity in high heat resistance materials. Easy to print without pre-drying.
| Property | Method | Units | Value |
|---|---|---|---|
| Filament diameter (+/- 0.05 mm) | mm | 1.75 | |
| Density | ISO 1183-1 | g/cm3 | 1.14 |
Post Processing Instructions
- Material can be dissolved in ECO Solvent LAVA (available in 5 litre cans)
- Dissolving time depends on the geometry of the printed part
Thermal Properties
| Property | Method | Units | Value |
|---|---|---|---|
| Vicat softening temperature | ISO 306/B50 | °C | 208 |
| Temp of deflection under load (0.45 MPa)* | ISO 75-1/-2 | °C | 198 |
Recommended Processing Conditions
| Nozzle Temperaure | Recommended 330°C (320°C - 340°C) |
| Bed Temperature | Recommended 200°C (180°C - 215°C) |
| Chamber Temperature | Recommended 200°C (180°C - 215°C) |
| Bed Material | (Textured) PEI Sheet, Glass, Carbon Fibre Plate |
| Adhesion Promoter | Magigoo HT |
| Nozzle Diameter | >= 0.4mm |
| Print Speed | Recommended: 35 mm/s (30-50 mm/s) |
