Skip to content
- Description
- Technical Information
- Print Setting
- Miscellaneous
The 3D filament Kimya PETG-S is produced via copolymerization with PET. Polyethylene terephtalate glycol (PETG) is a saturated polyester polymer. It offers a perfect balance between flexibility and mechanical resistance and enables items to be produced with higher translucidity. Manufacturers use PETG to produce bottles, food containers, credit cards and loyalty cards. The 3D filament Kimya PETG-S has the following properties:
The PETG-S offers the perfect compromise between flexibility and mechanical resistance. Finally, it's not sensitive to moisture and therefore offers good adhesion between layers. Bright colors and polychrome One of the advantages of PETG-S is its choice of colors available for vivid and multicolored 3D prints. This 3D filament is the first Kimya filament available in translucent color (red, yellow, blue, green and black).
FILAMENT PROPERTIES
| PROPERTIES | TEST METHODS | VALUES |
|---|---|---|
| Diameter | INS-6712 | 1.75 ± 0.1 mm 2.85 ± 0.1 mm |
| Density | ISO 1183-1 | 1.274 g/cm3 |
| Moisture rate | INS-6711 | < 1 % |
| Melt flow index (MFI) | ISO 1133-1 (@225°C 2.16 kg) | 12.1 g/10min |
| Melting Temperature (Tm) | ISO 11357-1 DSC (10°C/min - 20-300°C) | 80 °C |
PRINT PARAMETERS AND SPECIMENS DIMENSIONS
| PRINTING DIRECTION | XY |
|---|---|
| Printing Speed | 50 mm/s |
| Infill | 100% - rectilinear |
| Infill Angle | 45°/-45° |
| Nozzle Temperature | 225°C |
| Bed T° | 60°C |
PRINTED SPECIMENS PROPERTIES
| PROPERTIES | TEST METHODS | VALUES | |
|---|---|---|---|
| MECHANICAL PROPERTIES | |||
| Tensile modulus | ISO 527-2/5A/50 | 1,833 MPa | |
| Tensile Strength | ISO 527-2/5A/50 | 46.6 MPa | |
| Tensile strain at strength | ISO 527-2/5A/50 | 3.3 % | |
| Tensile Stress at Break | ISO 527-2/5A/50 | 11.1 MPa | |
| Tensile strain at break | ISO 527-2/5A/50 | 24.3 % | |
| Flexural modulus | ISO 178 | 1,641 MPa | |
| Flexural stress at conventional deflection (3,5% strain)* | ISO 178 | 57.5 MPa | |
| Charpy impact resistance | ISO 179-1/1eA | 4 kJ/m² | |
| Shore Hardness | ISO 868 | 72.5D |
Data Sheets
| Description | LE FILAMENT PETG-S offre un ©quilibre parfait entre flexibilit© et r©sistance m©canique. |
|---|---|
| Highlight | Flexibility & Strong |
| Highlight 2 | Interlayer Adhesion |
| Highlight 3 | Low Water Absorption |
| Highlight 4 | Food Contact Compliant |
| Spool Material | PC |
| Steaming Temperature | 120°C |
| Steaming Duration | 4h-6h |
