Skip to content
- Description
- Printing Guide
Hyper Speed ABS V2 filament is specifically designed to be used with the Hyper FFF™ solution from the Hyper Speed filament line. When printing at high speeds, the regular ABS filament is rapidly fed into the heat block, and the polymer has very little time to go from a solid to a molten state, which can cause nozzle clogging and poor bonding quality between layers. Additionally, the regular ABS filament can be subject to warpage and delamination of the printed part during high-speed printing without a heated chamber.
With optimized molecular weight and stiffness, Hyper Speed ABS V2 filament is capable of printing at the speed of up to 300 mm/s thanks to its faster melting and homogenous cooling, which results in a lower temperature gradient and lower inner stress of printed part. Hyper Speed ABS V2 filament exhibits superior heat resistance compared to Hyper Speed ABS filament. With almost no warpage and improved interlayer bonding, Hyper Speed ABS V2 filament is also perfectly suitable for many functional prototyping parts, tools and fittings with many different possibilities for post-processing and finishing methods (e.g., polishing and acetone vapor smoothing).
Benefits：
- High Speed FFF printing
- Warp-free parts
- Improved interlayer bonding
- Heat resistance up to 77°C (HDT@0.45 MPa)
- Excellent impact resistance
- Higher dimensional stability
- Read for polishing and acetone vapor smoothing
Applications：
- Prototyping and design
- Jigs and Fixtures
- Manufacturing aids
- End-use parts
- Housings and enclosures
Recommended Print Settings
| Nozzle temperature (°C) | 220 - 260 |
|---|---|
| Printing speed (mm/s) | 50 - 300 |
| Build platform temperature (°C) | 80 |
| Cooling fan (%) | On |
| Layer height (mm) | 0.15 - 0.2 |
| Drying temperature (°C) | 50 |
Printing Notifications
- It is recommended to close the printer door and top cover during the printing process to minimise surface defects resulting from heat dissipation.
- For better bed adhesion and less chance of part warpage, adding a brim or raft is recommended.
