Skip to content
VERK
The Olsson Block kit
£109.09 Inc VAT£90.91 Exc VAT
The Olsson Block is a new hot end for your Ultimaker 2. This upgrade makes it possible to very quickly and easily change nozzles on your printer. This makes it...
JET RSB Nozzle | 0.4mm
£28.37 Inc VAT£23.64 Exc VAT
The JET RSB have a revised tip angle, revised jet shoulder width and revised internal geometry, with a gentle slope leading down to the exit. They are also slippery inside,...
JET RSS Nozzle (Steel)
£43.63 Inc VAT£36.36 Exc VAT
The JET RSS50 is meant for printing abrasive materials, and such much stronger than a brass nozzle. The downside is slower printing speed due to the lower thermal conductivity of...
Olsson Ruby Nozzle 1.75mm | 0.4mm
£96.00 Inc VAT£80.00 Exc VAT
ONE NOZZLE FOR ALL MATERIALS The Olsson Ruby will work with a huge range of materials. PLA, ABS, CPE/PET, Nylon, and composites with abrasive additives such as Carbon fibre, Steel,...
3D Verkstan UltiMaker Toolkit
£178.80 Inc VAT£149.00 Exc VAT
A toolkit with all the tools that facilitate printing and easier maintenance. The bag contains: An angled pair of nippers for cutting the filament A precision rod for trimming models...
JET RSB Nozzle | 0.25mm
£28.37 Inc VAT£23.64 Exc VAT
The JET RSB have a revised tip angle, revised jet shoulder width and revised internal geometry, with a gentle slope leading down to the exit. They are also slippery inside,...
Olsson Ruby Nozzle 2.85mm | 0.6mm
ONE NOZZLE FOR ALL MATERIALS The Olsson Ruby will work with a huge range of materials. PLA, ABS, CPE/PET, Nylon, and composites with abrasive additives such as Carbon fibre, Steel,...
JET RSB Nozzle | 0.6mm
£28.37 Inc VAT£23.64 Exc VAT
The JET RSB have a revised tip angle, revised jet shoulder width and revised internal geometry, with a gentle slope leading down to the exit. They are also slippery inside,...
Olsson Ruby Nozzle 2.85mm | 0.4mm
ONE NOZZLE FOR ALL MATERIALS The Olsson Ruby will work with a huge range of materials. PLA, ABS, CPE/PET, Nylon, and composites with abrasive additives such as Carbon fibre, Steel,...
Olsson Ruby Nozzle 1.75mm | 0.6mm
ONE NOZZLE FOR ALL MATERIALS The Olsson Ruby will work with a huge range of materials. PLA, ABS, CPE/PET, Nylon, and composites with abrasive additives such as Carbon fibre, Steel,...
Olsson Ruby Nozzle 1.75mm | 0.8mm
ONE NOZZLE FOR ALL MATERIALS The Olsson Ruby will work with a huge range of materials. PLA, ABS, CPE/PET, Nylon, and composites with abrasive additives such as Carbon fibre, Steel,...
JET RSB Nozzle | 0.8mm
£28.37 Inc VAT£23.64 Exc VAT
The JET RSB have a revised tip angle, revised jet shoulder width and revised internal geometry, with a gentle slope leading down to the exit. They are also slippery inside,...
Olsson Ruby Nozzle 2.85mm | 0.8mm
ONE NOZZLE FOR ALL MATERIALS The Olsson Ruby will work with a huge range of materials. PLA, ABS, CPE/PET, Nylon, and composites with abrasive additives such as Carbon fibre, Steel,...