COVID-19 Update - We are continuing to operate as usual during this period. However, there is an increased demand for certain products that are being used to aid the national response to this emergency. This may lead to a delay in our usual delivery times for those products.
Technology
Fused Filament Fabrication
Print head
Dual nozzle, with lifting mechanism on 2nd nozzle.
Easily swappable printcores.
Build volume
Left nozzle: 215x215x300mm
Right nozzle: 215x215x300mm
Dual material: 197x215x300mm
Filament diameter
2.85 mm
Layer resolution
0.4mm nozzle: 20 - 200 micron
Step accuracy X, Y, Z
12.5, 12.5, 2.5 micron
Print head travel speed
30 - 300 mm/s
Material flow speed
0.40: up to 16mm³/s
Build plate
Heated glass bed
Material types
PLA, PVA, ABS, CPE, Nylon
Nozzle diameter
0.4mm
Nozzle temperature
180 - 280 ºC
Build plate temperature
20 - 100 ºC
Nozzle heat up time
< 2 min
Build plate heat up time
< 4 min (20 - > 60 ºC)
Average operation noise
50 dBA
Nozzle replacement
Easily swappable printcores
Filament storage
Open, reel holder incl guide for 2 spools of 750g
NFC system to automatically detect material type
Connectivity
Wifi, ethernet, stand alone via USB-drive
Bed levelling
Active leveling
Camera
Yes
Printer outer dimensions (incl bowden tube and spoolholder)
49,3 x 33,8 x 68,8 cm
Printer outer dimensions (excl bowden tube and spoolholder)
35,7 x 33,8 x 48,8 cm
Nett weight
11,3 kg
Shipping weight
16,2 kg
Shipping box dimensions
40,0 x 39,0 x 68,0 cm
Input
100 - 240V
4A, 50-60Hz
221 W max.
Output
24 V DC, 9.2 A
Ambient operating conditions
15 - 32 ºC, 10 - 90% RH non condensing
Refer to material specs for optimal operating conditions
Storage conditions printer
0 - 32 ºC
Supplied software
Cura 2 - Official Ultimaker Software
Supported OS
Windows, Mac, Linux
File types
Print direct from Cura via Network, Stand alone
USB drive printing
