3D Printing Materials

With Ultrafuse® PLA Tough filaments, a highly versatile biocompatible and biobased material is made and specially developed for the needs of professional users. It effortlessly accommodates validated high-printing speeds up...

The hardest elastomer in Forward AM Forward AM's flexible product line Ultrafuse® TPU 64D is the hardest elastomer in Forward AM Forward AM's flexible product line. The material shows a...

Ultrafuse 316L combines greater freedom of design with a low total cost of ownership. 3D-printed parts acquire their final properties, for example in terms of hardness and strength, through a...

Description Ultrafuse® PP GF30 contains 30% of special glass fibers that are designed for filament making and 3D printing so Ultrafuse® PP GF30 is compatible with any standard FFF printer....

Natural ASA (Acrylonitrile Styrene Acrylate) 0.75kg. 1.75mm diameter and approximately 90m long Ultrafuse ASA is a high-performance thermoplastic with similar mechanical properties as ABS. ASA offers additional benefits such as...

Description Ultrafuse‚® PA6 GF30 contains 30% of special glass fibers that aredesigned for filament making and 3D printing so. PA6 GF30 has a reduced warping compared to neat PA6 which...

Red PLA 0.75kg. 1.75mm diameter and approximately 90m long PLA is Poly-Lactic-Acid, a biodegradable polymer with a low melting point. It is an easy material to print with and Ultrafuse PLA...

Ultrafuse® TPS 90A is an elastomer based on the raw material SEBS. The combination of durable and flexible building blocks leads to a very versatile material. Compared to other flexible...

Description Ultrafuse® PET  (previously Innofil3D PET, different name, same high-quality product!)is made from a premium, food approved PET (Polyethylene terephthalate). PET is widely used to produce food and beverage containers...

Ultrafuse 316L combines greater freedom of design with a low total cost of ownership. 3D-printed parts acquire their final properties, for example in terms of hardness and strength, through a...

PLA is Poly-Lactic-Acid, a biodegradable polymer with a low melting point. It is an easy material to print with and Ultrafuse PLA gives a smooth printing result. This most used...

Ultrafuse® TPU 95A has been developed specificially to enable fast and easy printing with a flexible filament for Fused Filament Fabrication. By building on the legacy of BASF‘s decades of...

Ultrafuse® TPS 90A is an elastomer based on the raw material SEBS. The combination of durable and flexible building blocks leads to a very versatile material. Compared to other flexible...

PLA is Poly-Lactic-Acid, a biodegradable polymer with a low melting point. It is an easy material to print with and Ultrafuse PLA gives a smooth printing result. This most used...