Skip to content
The Kimya PEKK Carbon 3D filament belongs to the polyaryletherketone family. Polyetherketoneketone (PEKK) is a thermoplastic polymer reinforced with carbon fiber. This combination gives it a high level of rigidity...
GF30-PA6 was developed to meet the demands of the real world. GF30-PA6 is a reinforced PA6 nylon filament with 30% glass fiber that is up to 250% stronger than carbon...
Description High-performance, water-soluble support 1.75mm filament‚1Kg spool. Stable at chamber temperatures up to 120ºC. Simply put, AquaSys® 120 is a water-soluble support filament that‚„s unmatched in the industry. Designed for...
Technical filament from polyamide modified for 3D-printing in FFF. Filament for FFF-printers with major PA 6 content 15 weight-% glass fiber high tensile strength; moderate water absorption low warping effect...
Technical filament from polyamide modified for 3D-printing in FFF with additional carbon fibers. Material Properties The carbon fibers reduce the shrinkage and the warping behaviour extremely. Material shows excellent strength...
Technical filament from polyamide modified for 3D-printing in FFF. Filament for FFF-printers with major PA 6 content 15 weight-% glass fiber high tensile strength; moderate water absorption low warping effect...
The Kimya PPSU-S 3D filament belongs to the polysulfone family. Polyphenylsulfone (PPSU) is an amorphous thermoplastic. It is a technical material with an elevated glass transition temperature and low humidity...
Technical filament from polyamide modified for 3D-printing in FFF. Filament for FFF-printers with major PA 6 content unfilled high tensile strength; moderate water absorption low warping effect excellent adhesion to...
Description Technical filament from polyamide modified for 3D-printing in FFF. Filament for FFF-printers with major PA 12 content unfilled high tensile strength; very low water absorption low warping effect excellent...
The Kimya PEI-1010 3D filament belongs to the family of thermoplastic polyimides. Polyetherimide (PEI) is an amorphous thermoplastic. It benefits from good resistance to temperature and solvents, as well as...
ONE NOZZLE FOR ALL MATERIALS The Olsson Ruby will work with a huge range of materials. PLA, ABS, CPE/PET, Nylon, and composites with abrasive additives such as Carbon fibre, Steel,...
ONE NOZZLE FOR ALL MATERIALS The Olsson Ruby will work with a huge range of materials. PLA, ABS, CPE/PET, Nylon, and composites with abrasive additives such as Carbon fibre, Steel,...
Ultrafuse® Support Layer filament developed to be used in combination with Ultrafuse® Metal Filaments. When printed between support and the object, it creates a barrier during sintering and facilitates the separation...
You've viewed 14 of 65 products
