Skip to content
All
JET RSB Nozzle | 0.6mm
£28.37 Inc VAT£23.64 Exc VAT
The JET RSB have a revised tip angle, revised jet shoulder width and revised internal geometry, with a gentle slope leading down to the exit. They are also slippery inside,...
JET RSB Nozzle | 0.8mm
£28.37 Inc VAT£23.64 Exc VAT
The JET RSB have a revised tip angle, revised jet shoulder width and revised internal geometry, with a gentle slope leading down to the exit. They are also slippery inside,...
JET RSS Nozzle (Steel)
£43.63 Inc VAT£36.36 Exc VAT
The JET RSS50 is meant for printing abrasive materials, and such much stronger than a brass nozzle. The downside is slower printing speed due to the lower thermal conductivity of...
Olsson Ruby Nozzle 1.75mm | 0.4mm
ONE NOZZLE FOR ALL MATERIALS The Olsson Ruby will work with a huge range of materials. PLA, ABS, CPE/PET, Nylon, and composites with abrasive additives such as Carbon fibre, Steel,...
Olsson Ruby Nozzle 1.75mm | 0.6mm
ONE NOZZLE FOR ALL MATERIALS The Olsson Ruby will work with a huge range of materials. PLA, ABS, CPE/PET, Nylon, and composites with abrasive additives such as Carbon fibre, Steel,...
Olsson Ruby Nozzle 1.75mm | 0.8mm
ONE NOZZLE FOR ALL MATERIALS The Olsson Ruby will work with a huge range of materials. PLA, ABS, CPE/PET, Nylon, and composites with abrasive additives such as Carbon fibre, Steel,...
Olsson Ruby Nozzle 2.85mm | 0.6mm
ONE NOZZLE FOR ALL MATERIALS The Olsson Ruby will work with a huge range of materials. PLA, ABS, CPE/PET, Nylon, and composites with abrasive additives such as Carbon fibre, Steel,...
Olsson Ruby Nozzle 2.85mm | 0.8mm
ONE NOZZLE FOR ALL MATERIALS The Olsson Ruby will work with a huge range of materials. PLA, ABS, CPE/PET, Nylon, and composites with abrasive additives such as Carbon fibre, Steel,...
Support Heated Bed & Heated Bed Cable Assembly
£131.92 Inc VAT£109.93 Exc VAT
Summary This is the Heated Bed Assembly for the: Ultimaker 2 Ultimaker 2 Extended Ultimaker 2+ Ultimaker 2+ Extended This is the Ultimaker print table heated bed with cable. The...
TFM Coupler | UM2+ UM2 Series Printers
£20.29 Inc VAT£16.91 Exc VAT
The Ultimaker 2+ TFM coupler is an improved replacement for the PTFE couple and is suitable for the Ultimaker 2, Ultimaker 2 Extended, Ultimaker 2+, Ultimaker 2 Extended+ and the...
The Olsson Block kit
£109.09 Inc VAT£90.91 Exc VAT
The Olsson Block is a new hot end for your Ultimaker 2. This upgrade makes it possible to very quickly and easily change nozzles on your printer. This makes it...
Ultimaker 2 Extrusion Upgrade Kit
£480.00 Inc VAT£400.00 Exc VAT
For Ultimaker 2 & Ultimaker 2 Extended The new Extrusion upgrade kit lets you turn your Ultimaker 2 into an Ultimaker 2+ in under an hour. Once done, you'll have...
Ultimaker Glass Plate (UM2 Range UM3 Range S3)
£53.40 Inc VAT£44.50 Exc VAT
This is the Ultimaker Glass Plate. With it you no longer need the blue tape. It gives you a high quality gloss bottom surface and great adhesion. This part is NOT...