A Tidal Turbine Blade: Meltio's AM for the Marine Energy Sector

As the Marine Renewable Energy (MRE) sector continues to expand, it is essential that innovation in manufacturing keeps pace to reduce costs and enhance the economic viability of emerging technologies. Additive manufacturing, commonly known as 3D printing, offers a promising avenue for rapid prototyping of marine hydrokinetic technologies, particularly in support of the U.S. Department of Energy's Powering the Blue Economy™ initiatives.

This case study explores how the Meltio process facilitates the production of robust and corrosion-resistant parts specifically designed to endure harsh marine environments. Beyond improving performance, 3D printing offers rapid prototyping and cost-effective manufacturing solutions, unlocking significant innovation potential across various industries.

It focuses on the impressive results achieved in crafting a structural spar for an axial-flow tidal turbine blade, using Meltio's advanced 3D printing technology.

1. Introduction to the case study: a tidal turbine blade with Meltio additive manufacturing

The National Renewable Energy Laboratory (NREL) has adopted the Wire-Laser Metal Deposition (LMD) process from Meltio for the production of critical components made from stainless steel.

In this specific project, NREL focused on the design and manufacture of a structural spar for an axial-flow tidal turbine blade, which is integral to harnessing energy from water movement. Traditionally, these components are machined from solid blocks of aluminium. However, the team sought to explore the advantages of 3D printing to achieve faster and more efficient production.

Specifically, the project aimed to design, model, develop, and manufacture a 3D-printed structural spar for an axial-flow tidal turbine blade, a key structural part inside the turbine blade, which is used to generate energy from the movement of water.

Think of it as the backbone of the blade, designed to handle the forces that the blade will face when it is spinning in the water. Constructed from 316LSi stainless steel using the LMD process, this component is designed to withstand heavy loads and pressures from water currents without compromising structural integrity.

2. From concept to creation: from design to final product

2.1. Designing the spar

First, the team had to create a design for the spar. They based it on a specific tidal turbine blade model called MHKF1 (named MHK-Family 1, or MHKF1). It will have a 2.5 m diameter rotor (see the first image below) with a rated power of 25 kW. The blades themselves are 1.05 m long and incorporate several novel design features to reduce cavitation, erosion, and noise generation.

This design was very detailed because the spar had to fit inside the blade and handle the forces it would experience in the water. They used computer models to test how strong the design would be.

Early tests showed that the blade experienced significant bending and shear forces (3.9 kN·m and 5.6 kN), making it clear that strong, high-performance materials were needed to handle these forces. This remains true even if the blade is 3D-printed as a single part, due to the hydrodynamic loads it must withstand.

2.2. Material selection

The process of material selection for the tidal turbine blade spar was done carefully to ensure the spar could withstand the harsh marine environment and the loads it would face.

The spar is a critical structural part of the turbine blade, so the material had to meet several important criteria: strength, corrosion resistance, durability and manufacturability.

To determine the ideal AM processes for producing the MHKF1 blade, a decision matrix approach was taken: a scoring system where the team listed all the important material properties (strength, resistance to corrosion, toughness and so on). Key criteria for the manufacturing of the blade were given weights in terms of importance, ranging from 0 to 4, based on how important each was for the spar's performance in the water.

The team considered several materials, including polymers and metals. However, after deciding on the design and evaluating various metals, the team chose 316LSi stainless steel for several reasons:

  • Corrosion resistance. 316LSi stainless steel is very resistant to corrosion, which is perfect for the spar.
  • High strength. It is a strong metal that can withstand the forces the spar will face, including heavy bending and twisting from the water currents.
  • Compatibility with the W-LMD process. 316LSi stainless steel works well with Meltio's Laser Metal Deposition process. The metal can be fed in wire form and melted layer by layer to create the spar, and it provides the necessary strength once printed.

In the end, 316LSi stainless steel was selected because it provided the best combination of strength, corrosion resistance, and compatibility with the Meltio 3D printing process. This material choice ensured that the spar could handle the marine environment while being cost-effective and easy to manufacture with 3D printing. Furthermore, recommended tested parameters were given by Meltio.

Tip: discover the full range of Meltio materials and their properties on the Meltio Materials page.

2.3. Using Meltio's W-LMD process with the Meltio Engine system

The structural blade spar was manufactured by Ai-Build with a Meltio wire-laser metal 3D printer, the Meltio Engine, mounted to a KUKA robotic system.

The printing was done using the Meltio W-LMD system, where a laser melts metal wire (in this case, stainless steel) and deposits it layer by layer to create the part. The Meltio printer was mounted on a KUKA robotic arm, which helped guide the laser precisely along the shape of the spar.

The spar was printed with double walls and a 100% solid metal core for added strength. Extra layers were included at the base to facilitate easy removal from the printing plate. Throughout the process, 1 mm diameter 316LSi stainless steel wire was fed into the system, with the laser melting and precisely placing it to form the spar's shape.

2.4. Challenges and limitations

Although the printing process went smoothly overall, there were some challenges:

  • Surface defects. In some areas of the spar, especially where there were overhangs (sections of the part without support underneath), defects like waviness on the surface appeared. This happened because the molten steel sagged slightly without enough support below it (see images a and b below).
  • Warpage of the base plate. After printing, the team noticed that the base plate, where the spar was attached during the build, had warped due to the high heat involved in the LMD process. This warping created some challenges in removing the spar cleanly from the plate (see image c).
  • Excess heat at the tip. As the spar tapered toward the tip, the cross-section became smaller, and the part did not have enough time to cool between layers. This caused excess metal to accumulate in certain spots, leading to surface defects (see image d).

Solutions to these challenges

The final spar turned out to be structurally sound, despite the surface defects. The printed spar demonstrated that Meltio's W-LMD process could produce large, complex parts suitable for marine environments, though a few areas could be improved:

  • Reducing surface defects. The team suggested that in future prints, they could adjust the layer height, laser power, or even change the part's orientation during printing to reduce these defects.
  • Managing heat. They realised that by increasing the cooling time between layers near the tip or improving the calibration of the lasers, they could prevent some of the excess metal build-up and improve the quality of the print.

2.5. Post-processing phase

After the spar was printed, it went through a post-processing phase:

  • Cleaning. The outer surfaces of the spar were cleaned using a wire wheel and a flap disc attached to a grinder. This smoothed out the rough surfaces caused by the printing process.
  • Drilling and tapping. The root of the spar (the base) needed mounting holes for bolts to attach it to the turbine. To avoid disrupting the printing process, these holes were not printed. Instead, they were drilled and tapped afterwards using CNC machining to ensure accuracy (see image c below).

2.6. Final machining and testing

Once the spar was printed and cleaned, the final step was to remove the base plate and make sure the root face was flat. Now that the final machining processes are complete, the spar will be mounted to a test stand and subjected to a rigorous structural validation programme to ensure it can handle the loads it would face in the real world.

“Structural validation is critical to ensuring that the spar will react to real-life forces in the way that our models predict. It also helps us understand how the novel additive manufacturing process differs from conventional steel manufacturing techniques and how we can account for it in future designs.”

— Paul Murdy, NREL

3. Conclusion: a reliable design process that broadens the horizons for MRE technologies

The use of Directed Energy Deposition (DED) technology, and more specifically Meltio's W-LMD, in the development of complex marine structures represents a significant advancement, particularly for the ocean energy sector.

The successful manufacturing of a full-scale structural spar for the MHKF1 turbine blade demonstrates the capability of DED to produce intricate geometries that are unachievable through conventional methods, thus supporting the Powering the Blue Economy™ initiatives of the U.S. Department of Energy Water Power Technologies Office.

“We've opened a really unique design space through 3D printing. This project has demonstrated that additive manufacturing has the potential to produce very strong, stiff structures that will be good for marine energy.”

— Paul Murdy, NREL

While surface finish issues, thermal stress-induced warping, and other challenges inherent to DED were identified, these findings provide valuable insights for future iterations. The National Renewable Energy Laboratory's innovative approach sets a new benchmark for both the marine and other industries, proving that robust, customised solutions can be delivered efficiently. This work also highlights the importance of addressing scalability and material limitations in extreme environments, which will undoubtedly guide the evolution of 3D-printed Marine Renewable Energy (MRE) components moving forward.

In conclusion, this research establishes a benchmark process for leveraging additive manufacturing in the development of marine hydrokinetic structures, setting the stage for future optimisation and techno-economic analysis.

Meltio

This case study was originally published by Meltio as A tidal turbine blade: Meltio's AM for the Marine Energy Sector, featuring work by NREL and Ai-Build. Reproduced here with credit to Meltio.