Skip to content
Meet the Creality K2 Plus Combo
Features
16 Colors, Level up Your Creativity
CFS comes with a connection hub on the back. By hooking up as many as four CFS units together, you are able to print in the splendor of 16 colors*. Saves the need for extra painting afterward. *K2 Plus Combo includes only one CFS unit. For 16 colors, you need to buy three additional CFS units.
Irresistible Charm of Colorful 3D Prints
Presentation-ready Prototypes, High-quality Parts & Products, Stunning Figurines, Spectacular Artwork Replicas
New ""Matrix"" Frame, Ultra Sturdy
K2 Plus is a beast with its temper well contained for unprecedented positioning accuracy.
5mm Thick Aluminum Alloy Heatbed: Holding exceptionally well against deformation and vibration. Precise Steel X-axis Rail: Stiff carbon steel processed with great precision. Highly resistant to wear or warp.
Active Belt Tensioning
Timing belts may get loose over time, leading to poor print quality and accuracy. On the K2 Plus, the belt tension is checked and rigged actively by a pressure sensor instead of manually. Now, belt tensioning is a thing you can forget about.
Incredibly Quiet, While Printing Hard
Annoyed by the buzzing noise? Not K2 Plus. By adopting step-servo motors and dynamically balanced fans. It is no louder than someone typing on a laptop PC, truly a creative machine you can work next to. Noise Level at 300mm/s ≤ 45dB* *Data from Creality Lab. Tested with one spool of filament.
Blazing Speed, a New Record
Blazing Speed, a New Record For a large-format machine, 600mm/s is pretty fast, but that's not the whole story. Turbocharged by the step-servo motors, it can accelerate at a staggering 30000mm/s²*.
Next-gen Direct Drive Extruder
Automated Filament Cutter: The cutter has a durable tungsten steel blade and can be pulled back to position by a magnet, able to sustain constant filament switches. Run-out Sensor: Nearly zero distance from the nozzle. It tells you to replace the filament when only about one inch is left. There will be little waste.
Durable Direct Drive Extrusion Hardened steel gears for better durability. Strain Gauge for Leveling: Highly sensitive for probing the bed.
Ready to Go
Print out of the Box
K2 Plus is pre-assembled, so you can use it right after unpacking and screen installation. Then, a boot-up quick guide covers self-tests such as leveling and fan calibration. Just walk away for a cup of joe. Things will be ready on their own.
Ingenious Anti-tilt Auto Leveling
- Auto Tilt Reduction
- Auto Levelling Compensation
- Pro-level First Layer
Chamber AI Camera Keeps a Keen Watch
- Print Failure Detection
- Build Plate Detection
- Time-lapse Filming
Toolhead AI Camera Tunes the Flow Rate
It can analyze a test 3D model and then generate an optimal PA value or flow rate percentage value. No more underfeeding and overfeeding that degenerate your prints.
Two Auxiliary Fans Set the Style Right Off
The part cooling airflow is nearly doubled as two auxiliary cooling fans are installed on the left and right sides of the chamber. The shapes and styles of your model will be set before any stringing and warping can happen
What Makes K2 Plus a Master of Materials?
Actively Heated Chamber: up to 60℃ environment. Essential to forge strong prints in ASA, PPA and other high-end materials*. High-temp Nozzle with Hardened Steel Tip: :Capable of reaching 350℃.
The Creality Reality
Technical Specifications
| Printing Techology | Fused Deposition Modeling (FDM) |
|---|---|
| Build Volume | 350*350*350mm |
| Dimensions | 495*515*916mm |
| Printing Speed | <600mm/s |
| Acceleration | 30000mm/s2 |
| Printing Accuracy | 100mm±0.1mm |
| Layer Height | 0.05-0.3mm |
| Extruder | Dual-gear direct drive extruder |
| Filament Diameter | 1.75mm |
| Nozzle Diameter | 4mm |
| Nozzle Temperature | ≤350°C |
| Heatbed Temperature | ≤120°C |
| Chamber Temperature | ≤60°C |
| Build Plate | Flexible Build Plate |
| Levelling Mode | Full-auto Levelling |
| XYZE Motor | Servo Step Motor |
| File Transfer | USB Drive/Ethernet/WiFi |
| File Storage | 32GB EMMC |
| WiFi | 2.4 GHz/5GHz |
| RFID Sensor | Included |
| Rated Voltage | 100-240V~ AC 50/60Hz |
| Display Screen | 4.3" Colour Touch Screen |
| Rated Power | 1200W |
| Supported Filaments | PLA/ABS/PETG/PA-CF/ PLA-CF/ PET/ASA/PPA-CF |
| Printable File Format | Gcode/3MF |
| Number of CFS Extensions | ≤4 |
| Slicing Software | Creality Print 5.0 or newer versions |
| UI Languages | English/German/Spanish/French/Italian/ Portuguese/Russian/Turkish/Japanese/ Korean/Chinese |
- Power Loss Recovery
- Auto Filament Relay
- Filament Tangle Detection
- Air Purifier
- Input Shaping
- Lighting Kit
- Active Belt Tilt Calibration
- Active Belt Tensioning
- Active Chamber Heater
- RFID-tagged Filaments
- CFS Compatibility
- AI Camera for Monitoring
- AI Camera for Calibration
