Simplify3D

Simplify3D includes everything you need to work with your 3D printer

Model setup and plating, slicing and print file creation, pre-print simulations, customizable support structures, mesh analysis and repair, machine control and monitoring, and much more! With support for hundreds of 3D printers.

Contact Us

Simplify3D is the last software you’ll ever need!

Calibrated for Your 3D Printer

Support for Hundreds of Different 3D Printers

Simplify3D has partnered with 3D printing companies in over 30 countries to ensure the software is compatible with the latest 3D printing hardware. We have tested and optimized hundreds of different 3D printers so that you can achieve exceptional results right out-of-the-box!

Easily Switch Between Multiple Machines

Instead of learning a different software program for each 3D printer that you buy, you can now use the same application for all of your 3D printing hardware. The software can be quickly switched between different machine configurations, allowing you to control everything from one central application.

Simplify3D - configuration assistant

Simulate Your Prints in Advance

Incredibly Realistic Simulations

Simplify3D includes an incredibly realistic pre-print simulation that allows you to see the exact actions your 3D printer will perform before you start the print. You can literally watch an animation of the extruder as it lays down each individual line of plastic, giving you more insight than ever before!

Identify Issues In Advance

The simulation includes information about the exact speeds, sequences, and settings that are used for your print so that you can quickly verify these settings at a glance. Stop wasting time on failed prints and use the realistic simulation to spot potential issues before even turning on your 3D printer!

Simplify3D - preview mode pre-print simulation

Award-Winning Support Structures

Improved Print Quality and Easy Break-Away Removal

Simplify3D is well-known for providing the best support structures available, allowing you to achieve the highest level of surface quality for even the most complex prints. Once the print is finished, the supports break-away easily without any special tools or post-processing.

Customize Your Supports for the Perfect Print

The software automatically suggests where support material should be added, but the ability to customize your supports is a fan favorite! Easily add more support in areas that may be prone to instability, or remove unnecessary supports for faster print times.

Simplify3D - customizable support structures

Expert Resources and Support

Resources to Improve Your Print Quality

Simplify3D customers have access to industry-leading resources that have been developed to help our customers improve their print quality. We’ve put decades worth of knowledge into these resources to make sure you can achieve the best print quality possible.

Experts Are Available to Help

If you encounter issues using your 3D printer, contact the 3D printing experts at Simplify3D who are here to help! Our support team has helped thousands of users improve their print quality. Buy with confidence knowing that our team is available if you run into any issues.

Simplify3D - print quality guide

Pro-Tools and Advanced Options

Simplify3D - heart model with mesh and supports

Built for High Performance

Simplify3D is known for its lightning-fast slicer that allows you to process incredibly complex models with ease. This allows you to spend more time perfecting your prints, and less time waiting on the software!

Simplify3D - variable print settings wizard

Variable Print Settings

Simplify3D has a unique ability that allows you to vary the slicing settings for different regions of your print. Optimize the settings for different features of your model or vary the mechanical properties of your part with only a few clicks!

Simplify3D - optimized dual extrusion

Optimized for Multiple Extruders

The software contains many features that were specifically created to improve the print quality from multi-extruder printers. Quickly access these features using the built-in Dual Extrusion Wizard for simple setup.

Simplify3D - turbine with layer height measurements

Precision for Small Features

Innovative features allow you to print smaller shapes than previously possible on FFF/FDM printers. The software dynamically adjusts the amount of flow to print small, tapering, or sharp edges with better definition.

Simplify3D - multi-part customization

Multi-Part Customization

Simplify3D includes an unprecedented level of control for multi-part prints. Adjust the order of how each part is printed, optimize the settings used for different models, or print each object one-by-one to minimize travel movements.

Simplify3D - advanced quality options

Total Control, Improved Quality

If you’re looking to achieve the best print quality possible, the software includes many advanced tools to optimize your printer’s performance. Whether you’re seeing zits, strings, banding, or gaps, the software has the options you need!

Simplify3D - scripting options

Powerful Scripting Engine

The software includes a built-in scripting engine so that you can customize your print files. Insert custom commands at a specific layer, modify critical sequences of the print, or customize the command syntax for new applications.

Simplify3D - mesh analysis and repair

Mesh Analysis and Repair

If you’ve ever worked with a problematic STL file, you know how frustrating that can be! Simplify3D includes built-in tools to help you identify and fix common mesh issues so that you can quickly get back to printing.

Simplify3D - machine control and monitoring

Machine Control and Monitoring

Simplify3D knows how to talk to your printer. The software includes a full machine interface, allowing you to manually control the 3D printer. You can also monitor the printer in real-time to make sure you know the latest status.

Simplify3D Technical Specifications

Supported Platforms Windows
Windows Vista or later
Both 32 and 64-bit installers are available
Mac OS
Mac OS X 10.7 or later
Linux
Ubuntu, Debian, and Fedora-based distributions are all supported
Both 32 and 64-bit installers are available
Recommended Distribution: Ubuntu 14.04 LTS or later
System Requirements
Recommended Requirements
Intel® Core i7 CPU
8GB or more of RAM
System Requirements
Minimum Requirements
Intel® Pentium® 4 CPU
4GB of RAM
OpenGL 2.0 capable system
Internet connection required*
1GB of available hard-disk space
Supported File Formats
Import
3D Models: stl, obj, 3mf
Image Conversion: jpg, png
Application: fff, factory
Supported File Formats
Export
Toolpaths: gcode, x3g, makerbot, 3w, g3drem, bfb, hsv
Application: fff, factory
Language Translations Easily switch between any of the following languages
  • English
  • French
  • German
  • Italian
  • Japanese
  • Spanish
  • Portuguese New

* An internet connection is required for the installation and continued use of the software

Contact Us

You can contact us either by filling out the contact form online or you can email one of our dedicated tech support for more information

Tech Support

support@3dgbire.com

Address

Units 44 & 45,
Chorley North Industrial Estate,
Chorley, Lancashire
PR6 7BX

Opening Hours

Mon - Fri / 9:00AM - 5:00PM

Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
January,February,March,April,May,June,July,August,September,October,November,December
Not enough items available. Only [max] left.
Shopping cart

Your cart is empty.

Return To Shop

Add Order Note Edit Order Note
Estimate Shipping
Add A Coupon

Estimate Shipping

Add A Coupon

Coupon code will work on checkout page