Innofil PLA Green Transparent Filament - 2.85mm

Innofil PLA Green Transparent Filament - 2.85mm

Innofil PLA Green Transparent Filament - 2.85mm

£22.50 ex. VAT ex. VAT was

Innofil PLA Green Transparent Filament - 2.85mm is unavailable

Leave your email address if you would like to be notified when it becomes available.


Description

Green Transparent PLA 0.75kg. 2.85mm diameter and approximately 90m long

PLA is Poly-Lactic-Acid, a biodegradable polymer with a low melting point. It is an easy material to print with and Innofil3D PLA gives a smooth printing result. This most used 3D printing material is available in a wide range of RAL and Innofil3D colours and translucent variants. When properly cooled, PLA has a higher maximum printing speed, lower layer heights and sharper printed corners. Combining this with low warping of the print makes it a popular plastic for makers, prosumers and schools.

The reason for the popularity in the 3D-printing world is it's easy to use. But don't underestimate the biobased factor as we live in a more conscious world.

Main features of Innofil PLA

  • Low processing temperature
  • Low warping
  • No heated bed required
  • No odour during processing

Technical Information

The easiest material to print with. Derived from corn starches it is cheap and eco-friendly too. We always recommend starting with PLA and using it wherever possible. It is our most popular material but if you require more mechanical strength or thermal resistance you will need to extend your filament palette.

Data Sheets

Download Technical Data Sheet

Download Safety Data Sheet