{"title":"PET","description":"","products":[{"product_id":"innofil-epr-innopet-white-1-75mm-750g","title":"Forward AM Ultrafuse PET White 1.75mm | 750g","description":"\u003cp\u003eEPR PET is made from a premium, food approved PET (Polyethylene terephtalate).\u003c\/p\u003e\n\u003cp\u003ePET is widely used to produce food and beverage containers and bottles.\u003cbr\u003eThis high quality filament will give you outstanding printing results: good layer adhesion, high resolution and easy to handle.\u003c\/p\u003e\n\u003cp\u003eIt has a natural transparent, smooth look. PET can be 100% recycled.\u003c\/p\u003e\n\u003ch5\u003eUltimaker Material Alliance\u003c\/h5\u003e\n\u003cp\u003eChoosing the right material is critical to the success of your 3D print. Ultimaker's open filament system lets you print with any 2.85 mm filament, and print profiles from the Ultimaker Marketplace streamline print preparation and maximize your print success rate.\u003c\/p\u003e\n\n\u003ca class=\"btn btn-primary btn-sm\" href=\"https:\/\/3dgbire.com\/pages\/ultimaker-material-alliance\"\u003eFind out more\u003c\/a\u003e","brand":"INNO","offers":[{"title":"Default Title","offer_id":7862844063797,"sku":"1303120019","price":22.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/2009ef8d-f43a-4348-a928-c666020549a0.jpg?v=1777987401"},{"product_id":"innofil-epr-innopet-green-1-75mm-750g","title":"Forward AM Ultrafuse PET Green | 1.75mm | 750g","description":"\u003cp\u003eEPR PET is made from a premium, food approved PET (Polyethylene terephtalate).\u003c\/p\u003e\n\u003cp\u003ePET is widely used to produce food and beverage containers and bottles.\u003cbr\u003eThis high quality filament will give you outstanding printing results: good layer adhesion, high resolution and easy to handle.\u003c\/p\u003e\n\u003cp\u003eIt has a natural transparent, smooth look. PET can be 100% recycled.\u003c\/p\u003e\n\u003ch5\u003eUltimaker Material Alliance\u003c\/h5\u003e\n\u003cp\u003eChoosing the right material is critical to the success of your 3D print. Ultimaker's open filament system lets you print with any 2.85 mm filament, and print profiles from the Ultimaker Marketplace streamline print preparation and maximize your print success rate.\u003c\/p\u003e\n\n\u003ca class=\"btn btn-primary btn-sm\" href=\"https:\/\/3dgbire.com\/pages\/ultimaker-material-alliance\"\u003eFind out more\u003c\/a\u003e","brand":"INNO","offers":[{"title":"Default Title","offer_id":7862859857973,"sku":"1303120015","price":22.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/products\/Innofil-pet-green.jpg?v=1570547174"},{"product_id":"innofil3d-pet-cf15-black-2-85mm","title":"Forward AM Ultrafuse PET CF15 Black | 2.85mm | 750g","description":"\u003ch5 data-mce-fragment=\"1\"\u003eDescription\u003cbr\u003e\n\u003c\/h5\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\n\u003cdiv class=\"col-1-2 left editor\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUltrafuse® PET  (previously Innofil3D PET, different name, same high-quality product!)is made from a premium, food approved PET (Polyethylene terephthalate).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePET is widely used to produce food and beverage containers and bottles.\u003cbr data-mce-fragment=\"1\"\u003eThis high-quality filament will give you outstanding printing results: good layer adhesion, high resolution and easy to handle.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIt has a natural transparent, smooth look. Ultrafuse PET can be 100% recycled.\u003c\/p\u003e\n\u003ch5\u003eQuality\u003c\/h5\u003e\n\u003cdiv class=\"col-1-2 left editor\"\u003e\n\u003cp\u003eWe select the best raw materials available from renowned suppliers.\u003c\/p\u003e\n\u003cp\u003eDedicated people, highest standards.\u003c\/p\u003e\n\u003cp\u003eProduction on our state-of-the-art computer-controlled machinery guarantees a truly consistent filament, also between colors and batches.\u003cbr\u003eIt will perform as expected, every time.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAll our products are 100% traceable to the source.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eTips \u0026amp; tricks\u003c\/h5\u003e\n\u003cdiv class=\"col-1-2 left editor\"\u003e\n\u003cp\u003eTo make the best prints with Ultrafuse PET, we use the following settings on an Ultimaker and Wanhao Duplicator;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTemperature at 210 degrees\u003c\/li\u003e\n\u003cli\u003eHeated bed at 75 degrees\u003c\/li\u003e\n\u003cli\u003eSpeed between 30 and 70mm\u003c\/li\u003e\n\u003cli\u003eReady with printing? The heated bed should cool down and you just can take the print off of your bed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003ch3\u003eTechnical \u0026amp; Mechanical data sheet\u003c\/h3\u003e\n\u003cdiv class=\"col-1-1 left editor\"\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/Ultrafuse_PET_CF15_TDS_EN_v3.3.pdf?v=1722342207\" class=\"button\" target=\"_blank\"\u003eTechnical data sheet\u003c\/a\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/ULTRAFUSE_PETCF15_11120960_SDS_GEN_00_EN_6-1_NL07.pdf?v=1722342280f\" class=\"button\" target=\"_blank\"\u003eMechanical safety data sheet\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Forward AM","offers":[{"title":"Default Title","offer_id":12723495075893,"sku":"1303130002","price":61.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/products\/Innofil-petcf-black.jpg?v=1570546254"},{"product_id":"innofil3d-pet-cf15-black-1-75mm","title":"Forward AM Ultrafuse PET CF15 Black | 1.75mm | 750g","description":"\u003ch5 data-mce-fragment=\"1\"\u003eDescription\u003cbr\u003e\n\u003c\/h5\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"col-1-2 left editor\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUltrafuse® PET  (previously Innofil3D PET, different name, same high-quality product!)is made from a premium, food approved PET (Polyethylene terephthalate).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePET is widely used to produce food and beverage containers and bottles.\u003cbr data-mce-fragment=\"1\"\u003eThis high-quality filament will give you outstanding printing results: good layer adhesion, high resolution and easy to handle.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIt has a natural transparent, smooth look. Ultrafuse PET can be 100% recycled.\u003c\/p\u003e\n\u003ch5\u003eQuality\u003c\/h5\u003e\n\u003cdiv class=\"col-1-2 left editor\"\u003e\n\u003cp\u003eWe select the best raw materials available from renowned suppliers.\u003c\/p\u003e\n\u003cp\u003eDedicated people, highest standards.\u003c\/p\u003e\n\u003cp\u003eProduction on our state-of-the-art computer-controlled machinery guarantees a truly consistent filament, also between colors and batches.\u003cbr\u003eIt will perform as expected, every time.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAll our products are 100% traceable to the source.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eTips \u0026amp; tricks\u003c\/h5\u003e\n\u003cdiv class=\"col-1-2 left editor\"\u003e\n\u003cp\u003eTo make the best prints with Ultrafuse PET, we use the following settings on an Ultimaker and Wanhao Duplicator;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTemperature at 210 degrees\u003c\/li\u003e\n\u003cli\u003eHeated bed at 75 degrees\u003c\/li\u003e\n\u003cli\u003eSpeed between 30 and 70mm\u003c\/li\u003e\n\u003cli\u003eReady with printing? The heated bed should cool down and you just can take the print off of your bed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003ch3\u003eTechnical \u0026amp; Mechanical data sheet\u003c\/h3\u003e\n\u003cdiv class=\"col-1-1 left editor\"\u003e\n  \u003cdiv style=\"display: flex; justify-content: space-evenly;\"\u003e\n\u003ca class=\"button\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/Ultrafuse_PET_CF15_TDS_EN_v3.3.pdf?v=1722342207\" target=\"_blank\"\u003eTechnical data sheet\u003c\/a\u003e\u003ca class=\"button\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/ULTRAFUSE_PETCF15_11120960_SDS_GEN_00_EN_6-1_NL07.pdf?v=1722342280\" target=\"_blank\"\u003eMechanical safety data sheet\u003c\/a\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Forward AM","offers":[{"title":"Default Title","offer_id":12756269662261,"sku":"1303130001","price":61.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/products\/Innofil-petcf-black_3e20519c-724b-475b-82a7-60b920d6f1e7.jpg?v=1570546330"},{"product_id":"innofil-epr-innopet-2-85mm-2500g","title":"Forward AM Ultrafuse PET Natural | 2.85mm | 2500g","description":"\u003cp\u003eEPR PET is made from a premium, food approved PET (Polyethylene terephtalate).\u003c\/p\u003e\n\u003cp\u003ePET is widely used to produce food and beverage containers and bottles.\u003cbr\u003eThis high quality filament will give you outstanding printing results: good layer adhesion, high resolution and easy to handle.\u003c\/p\u003e\n\u003cp\u003eIt has a natural transparent, smooth look. PET can be 100% recycled.\u003c\/p\u003e\n\u003ch5\u003eUltimaker Material Alliance\u003c\/h5\u003e\n\u003cp\u003eChoosing the right material is critical to the success of your 3D print. Ultimaker's open filament system lets you print with any 2.85 mm filament, and print profiles from the Ultimaker Marketplace streamline print preparation and maximize your print success rate.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3dgbire.com\/pages\/ultimaker-material-alliance\" class=\"btn btn-primary btn-sm\"\u003eFind out more\u003c\/a\u003e\u003c\/p\u003e","brand":"INNO","offers":[{"title":"Default Title","offer_id":12822847651893,"sku":"1303120012","price":37.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/8db67cd9-c440-4cbb-bff8-15b7c5ba2c75.jpg?v=1775037094"},{"product_id":"innofil-epr-innopet-1-75mm-2500g","title":"Forward AM Ultrafuse PET Natural | 1.75mm | 2500g","description":"\u003cp\u003eEPR PET is made from a premium, food approved PET (Polyethylene terephtalate).\u003c\/p\u003e\n\u003cp\u003ePET is widely used to produce food and beverage containers and bottles.\u003cbr\u003eThis high quality filament will give you outstanding printing results: good layer adhesion, high resolution and easy to handle.\u003c\/p\u003e\n\u003cp\u003eIt has a natural transparent, smooth look. PET can be 100% recycled.\u003c\/p\u003e\n\u003ch5\u003eUltimaker Material Alliance\u003c\/h5\u003e\n\u003cp\u003eChoosing the right material is critical to the success of your 3D print. Ultimaker's open filament system lets you print with any 2.85 mm filament, and print profiles from the Ultimaker Marketplace streamline print preparation and maximize your print success rate.\u003c\/p\u003e\n\n\u003ca class=\"btn btn-primary btn-sm\" href=\"https:\/\/3dgbire.com\/pages\/ultimaker-material-alliance\"\u003eFind out more\u003c\/a\u003e","brand":"INNO","offers":[{"title":"Default Title","offer_id":12822847684661,"sku":"1303120011","price":54.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/ef128b88-07bc-49a3-b312-209b43c6d642.jpg?v=1775037098"},{"product_id":"innofil-epr-innopet-black-1-75mm-2500g","title":"Forward AM Ultrafuse PET Black | 1.75mm | 2500g","description":"\u003cp\u003eEPR PET is made from a premium, food approved PET (Polyethylene terephtalate).\u003c\/p\u003e\n\u003cp\u003ePET is widely used to produce food and beverage containers and bottles.\u003cbr\u003eThis high quality filament will give you outstanding printing results: good layer adhesion, high resolution and easy to handle.\u003c\/p\u003e\n\u003cp\u003eIt has a natural transparent, smooth look. PET can be 100% recycled.\u003c\/p\u003e\n\u003ch5\u003eUltimaker Material Alliance\u003c\/h5\u003e\n\u003cp\u003eChoosing the right material is critical to the success of your 3D print. Ultimaker's open filament system lets you print with any 2.85 mm filament, and print profiles from the Ultimaker Marketplace streamline print preparation and maximize your print success rate.\u003c\/p\u003e\n\n\u003ca class=\"btn btn-primary btn-sm\" href=\"https:\/\/3dgbire.com\/pages\/ultimaker-material-alliance\"\u003eFind out more\u003c\/a\u003e","brand":"INNO","offers":[{"title":"Default Title","offer_id":12822847881269,"sku":"1303120007","price":54.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/ce827cb8-030a-462d-8043-1275a40e3a8d.jpg?v=1775037079"},{"product_id":"innofil-epr-innopet-black-1-75mm-4500g","title":"Forward AM Ultrafuse PET Black | 1.75mm | 4500g","description":"\u003cp\u003eEPR PET is made from a premium, food approved PET (Polyethylene terephtalate).\u003c\/p\u003e\n\u003cp\u003ePET is widely used to produce food and beverage containers and bottles.\u003cbr\u003eThis high quality filament will give you outstanding printing results: good layer adhesion, high resolution and easy to handle.\u003c\/p\u003e\n\u003cp\u003eIt has a natural transparent, smooth look. PET can be 100% recycled.\u003c\/p\u003e\n\u003ch5\u003eUltimaker Material Alliance\u003c\/h5\u003e\n\u003cp\u003eChoosing the right material is critical to the success of your 3D print. Ultimaker's open filament system lets you print with any 2.85 mm filament, and print profiles from the Ultimaker Marketplace streamline print preparation and maximize your print success rate.\u003c\/p\u003e\n\u003cp\u003e\u003ca class=\"btn btn-primary btn-sm\" href=\"https:\/\/3dgbire.com\/pages\/ultimaker-material-alliance\"\u003eFind out more\u003c\/a\u003e\u003c\/p\u003e","brand":"INNO","offers":[{"title":"Default Title","offer_id":12822847979573,"sku":"1303120006","price":95.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/d3a7ab33-7031-41a1-9577-73a837ea2d7c.jpg?v=1775037090"},{"product_id":"innofil-epr-innopet-white-1-75mm-2500g","title":"Forward AM Ultrafuse PET White | 1.75mm | 2500g","description":"\u003cp\u003eEPR PET is made from a premium, food approved PET (Polyethylene terephtalate).\u003c\/p\u003e\n\u003cp\u003ePET is widely used to produce food and beverage containers and bottles.\u003cbr\u003eThis high quality filament will give you outstanding printing results: good layer adhesion, high resolution and easy to handle.\u003c\/p\u003e\n\u003cp\u003eIt has a natural transparent, smooth look. PET can be 100% recycled.\u003c\/p\u003e\n\u003ch5\u003eUltimaker Material Alliance\u003c\/h5\u003e\n\u003cp\u003eChoosing the right material is critical to the success of your 3D print. Ultimaker's open filament system lets you print with any 2.85 mm filament, and print profiles from the Ultimaker Marketplace streamline print preparation and maximize your print success rate.\u003c\/p\u003e\n\u003cp\u003e\u003ca class=\"btn btn-primary btn-sm\" href=\"https:\/\/3dgbire.com\/pages\/ultimaker-material-alliance\"\u003eFind out more\u003c\/a\u003e\u003c\/p\u003e","brand":"INNO","offers":[{"title":"Default Title","offer_id":12822848143413,"sku":"1303120003","price":54.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/a7a6477c-fbce-4109-88fd-da1dab1e624c.jpg?v=1775037069"},{"product_id":"innofil-epr-innopet-white-1-75mm-4500g","title":"Forward AM Ultrafuse PET White | 1.75mm | 4500g","description":"\u003cp\u003eEPR PET is made from a premium, food approved PET (Polyethylene terephtalate).\u003c\/p\u003e\n\u003cp\u003ePET is widely used to produce food and beverage containers and bottles.\u003cbr\u003eThis high quality filament will give you outstanding printing results: good layer adhesion, high resolution and easy to handle.\u003c\/p\u003e\n\u003cp\u003eIt has a natural transparent, smooth look. PET can be 100% recycled.\u003c\/p\u003e\n\u003ch5\u003eUltimaker Material Alliance\u003c\/h5\u003e\n\u003cp\u003eChoosing the right material is critical to the success of your 3D print. Ultimaker's open filament system lets you print with any 2.85 mm filament, and print profiles from the Ultimaker Marketplace streamline print preparation and maximize your print success rate.\u003c\/p\u003e\n\u003cp\u003e\u003ca class=\"btn btn-primary btn-sm\" href=\"https:\/\/3dgbire.com\/pages\/ultimaker-material-alliance\"\u003eFind out more\u003c\/a\u003e\u003c\/p\u003e","brand":"INNO","offers":[{"title":"Default Title","offer_id":12822848208949,"sku":"1303120002","price":95.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/a154549b-718e-4d75-818b-0dbea101ed57.jpg?v=1775037053"},{"product_id":"innofil-epr-innopet-white-1-75mm-8500g","title":"Forward AM Ultrafuse PET White | 1.75mm | 8500g","description":"\u003cp\u003eEPR PET is made from a premium, food approved PET (Polyethylene terephtalate).\u003c\/p\u003e\n\u003cp\u003ePET is widely used to produce food and beverage containers and bottles.\u003cbr\u003eThis high quality filament will give you outstanding printing results: good layer adhesion, high resolution and easy to handle.\u003c\/p\u003e\n\u003cp\u003eIt has a natural transparent, smooth look. PET can be 100% recycled.\u003c\/p\u003e\n\u003ch5\u003eUltimaker Material Alliance\u003c\/h5\u003e\n\u003cp\u003eChoosing the right material is critical to the success of your 3D print. Ultimaker's open filament system lets you print with any 2.85 mm filament, and print profiles from the Ultimaker Marketplace streamline print preparation and maximize your print success rate.\u003c\/p\u003e\n\u003cp\u003e\u003ca class=\"btn btn-primary btn-sm\" href=\"https:\/\/3dgbire.com\/pages\/ultimaker-material-alliance\"\u003eFind out more\u003c\/a\u003e\u003c\/p\u003e","brand":"INNO","offers":[{"title":"Default Title","offer_id":12822848274485,"sku":"1303120001","price":172.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/f3ca1c97-ecb3-41f1-85ca-4c5da5efcb74.jpg?v=1775037061"},{"product_id":"dsm-arnite-id3040-petp-black-2-85mm-750g","title":"DSM Arnite ID3040 (PETP) Black | 2.85mm | 1kg","description":"\u003ch5\u003e\u003c\/h5\u003e \u003cdiv class=\"brandblock\"\u003eArnite ® ID 3040 combines high heat resistance, dimensional stability and outstanding strength with excellent processing characteristics. It's one of the very few pure PET filaments on the market today, and can be used to create everything from white goods connectors to automotive sensors.\u003c\/div\u003e \u003cdiv class=\"brandblock\"\u003eArnite ® ID 3040 is an open source polyethylene terephthalate (PET) filament material that has a higher melting point and lower moisture intake than traditional PETG filaments - enabling you to create more accurate 3D-printed parts at higher temperatures with low warpage and better strength and mechanical properties.\u003c\/div\u003e \u003cdiv class=\"brandblock\"\u003eArnite ® ID 3040 also gives you good fusion \u0026amp; interlayer strength with great surface qualities. Parts can be coated or painted easily, and can withstand weathering and moisture well. \u003c\/div\u003e \u003cdiv class=\"brandblock\"\u003eBest of all, Arnite ® ID 3040 doesn't just boost your manufacturing performance. It's also kind to the planet, thanks to its easy recyclability.\u003c\/div\u003e \u003cp\u003e \u003c\/p\u003e \u003c!---Case Studies Tab---\u003e \u003ch5\u003eCase Studies\u003c\/h5\u003e \u003ch3\u003eGiving new hope with revolutionary 3D printed prosthetics\u003c\/h3\u003e \u003cp\u003eWhen Michael Fine, lost his arm in a terrible car accident, things seemed very bleak. It looked even worse when he received his first prosthetic arm , it was expensive, heavy and basically unusable. It was his own son's ingenuity and passion for engineering,together with support from Somos ®, that brought a surprising and heartwarming change.\u003c\/p\u003e \u003cp\u003e\u003ca class=\"btn btn-primary btn-sm\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/New_Arm_Provides_New_Hope.pdf?10327\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRead Here\u003c\/a\u003e\u003c\/p\u003e","brand":"DSM","offers":[{"title":"Default Title","offer_id":14363097497653,"sku":"2803120003","price":50.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/a5896aa4-3d97-4f33-849c-03f49430d122.jpg?v=1775038190"},{"product_id":"dsm-arnite-id3040-petp-grey-2-85mm-750g","title":"DSM Arnite ID3040 (PETP) Grey | 2.85mm | 1kg","description":"\u003ch5\u003e\u003c\/h5\u003e \u003cdiv class=\"brandblock\"\u003eArnite ® ID 3040 combines high heat resistance, dimensional stability and outstanding strength with excellent processing characteristics. It's one of the very few pure PET filaments on the market today, and can be used to create everything from white goods connectors to automotive sensors.\u003c\/div\u003e \u003cdiv class=\"brandblock\"\u003eArnite ® ID 3040 is an open source polyethylene terephthalate (PET) filament material that has a higher melting point and lower moisture intake than traditional PETG filaments - enabling you to create more accurate 3D-printed parts at higher temperatures with low warpage and better strength and mechanical properties.\u003c\/div\u003e \u003cdiv class=\"brandblock\"\u003eArnite ® ID 3040 also gives you good fusion \u0026amp; interlayer strength with great surface qualities. Parts can be coated or painted easily, and can withstand weathering and moisture well. \u003c\/div\u003e \u003cdiv class=\"brandblock\"\u003eBest of all, Arnite ® ID 3040 doesn't just boost your manufacturing performance. It's also kind to the planet, thanks to its easy recyclability.\u003c\/div\u003e \u003cp\u003e \u003c\/p\u003e \u003c!---Case Studies Tab---\u003e \u003ch5\u003eCase Studies\u003c\/h5\u003e \u003ch3\u003eGiving new hope with revolutionary 3D printed prosthetics\u003c\/h3\u003e \u003cp\u003eWhen Michael Fine, lost his arm in a terrible car accident, things seemed very bleak. It looked even worse when he received his first prosthetic arm , it was expensive, heavy and basically unusable. It was his own son's ingenuity and passion for engineering,together with support from Somos ®, that brought a surprising and heartwarming change.\u003c\/p\u003e \u003cp\u003e\u003ca class=\"btn btn-primary btn-sm\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/New_Arm_Provides_New_Hope.pdf?10327\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRead Here\u003c\/a\u003e\u003c\/p\u003e","brand":"DSM","offers":[{"title":"Default Title","offer_id":14363097595957,"sku":"2803120004","price":50.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/3ee8a2c6-3371-4827-b1df-ef143efceea0_4aa5ab2c-d0ca-47c6-b25d-e96393791e95.jpg?v=1775038194"},{"product_id":"innofil3d-epr-innopet-black-1-75mm-8500g","title":"Forward AM Ultrafuse PET Black | 1.75mm | 8500g","description":"\u003cp\u003eEPR PET is made from a premium, food approved PET (Polyethylene terephtalate).\u003c\/p\u003e\n\u003cp\u003ePET is widely used to produce food and beverage containers and bottles.\u003cbr\u003eThis high quality filament will give you outstanding printing results: good layer adhesion, high resolution and easy to handle.\u003c\/p\u003e\n\u003cp\u003eIt has a natural transparent, smooth look. PET can be 100% recycled.\u003c\/p\u003e\n\u003ch5\u003eUltimaker Material Alliance\u003c\/h5\u003e\n\u003cp\u003eChoosing the right material is critical to the success of your 3D print. Ultimaker's open filament system lets you print with any 2.85 mm filament, and print profiles from the Ultimaker Marketplace streamline print preparation and maximize your print success rate.\u003c\/p\u003e\n\u003cp\u003e\u003ca class=\"btn btn-primary btn-sm\" href=\"https:\/\/3dgbire.com\/pages\/ultimaker-material-alliance\"\u003eFind out more\u003c\/a\u003e\u003c\/p\u003e","brand":"INNO","offers":[{"title":"Default Title","offer_id":30295824793653,"sku":"1303120005","price":172.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/f927179c-4eb1-403e-9352-67617c4e8828.jpg?v=1775037074"},{"product_id":"innofil3d-epr-innopet-black-2-85mm-750g-2500g","title":"Forward AM Ultrafuse PET Black | 2.85mm | 2500g","description":"\u003cp\u003eEPR PET is made from a premium, food approved PET (Polyethylene terephtalate).\u003c\/p\u003e\n\u003cp\u003ePET is widely used to produce food and beverage containers and bottles.\u003cbr\u003eThis high quality filament will give you outstanding printing results: good layer adhesion, high resolution and easy to handle.\u003c\/p\u003e\n\u003cp\u003eIt has a natural transparent, smooth look. PET can be 100% recycled.\u003c\/p\u003e\n\u003ch5\u003eUltimaker Material Alliance\u003c\/h5\u003e\n\u003cp\u003eChoosing the right material is critical to the success of your 3D print. Ultimaker's open filament system lets you print with any 2.85 mm filament, and print profiles from the Ultimaker Marketplace streamline print preparation and maximize your print success rate.\u003c\/p\u003e\n\u003cp\u003e\u003ca class=\"btn btn-primary btn-sm\" href=\"https:\/\/3dgbire.com\/pages\/ultimaker-material-alliance\"\u003eFind out more\u003c\/a\u003e\u003c\/p\u003e","brand":"INNO","offers":[{"title":"Default Title","offer_id":30295824990261,"sku":"1303120008","price":54.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/923b7798-fb7e-4e7a-bb7f-4db8d0488d5c.jpg?v=1775037128"},{"product_id":"innofil3d-innopet-green-filament-2-85mm-750g-default-lv","title":"Forward AM Ultrafuse InnoPET Green | 2.85mm | 750g","description":"\u003ch5\u003e\u003c\/h5\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp align=\"JUSTIFY\"\u003e\u003cstrong\u003e\u003cspan color=\"#000000\"\u003e\u003cspan face=\"Courier, serif\"\u003eGreen InnoPET 0.75kg. 2.85mm diameter and approximately 90m long\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003ePolyethene Terephthalate is the most common thermoplastic polymer resin of the polyester family. It is used in fibres for clothing or in containers for liquids and food (e.g. water bottles). There is a lot of confusion in the market between PET and PETG. PETG is a modified PET that it's in an amorphous state when cooled. \u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp class=\"p1\"\u003e\u003cspan\u003ePET is gaining popularity due to it is easy to use and engineering properties. PET is also easily recyclable as it is one of the most recycled plastics in the world\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMain features of Ultrafuse PET\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNo odour during processing\u003c\/li\u003e\n\u003cli\u003eLow warping\u003c\/li\u003e\n\u003cli\u003eNo heated bed required\u003c\/li\u003e\n\u003cli\u003eGreat layer adhesion\u003c\/li\u003e\n\u003cli\u003eWater tight (Based on print settings)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"font-size: 12px; color: #4d508c; margin: 10px; display: block; border: 3px solid #4d508c; padding: 30px;\"\u003e\u003cspan size=\"5\" style=\"font-size: x-large;\"\u003e\u003cstrong\u003eNew Ultrafuse Materials Profiles for Cura\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan color=\"#000\" style=\"color: #000000;\"\u003eUltrafuse have been working hard on creating material profiles for Ultimaker Cura slicing software. Having the material profiles for each of the Ultrafuse filaments creates a seamless process when slicing your models as all settings will be preset. These files are available for download.\u003c\/span\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.Ultrafuse.com\/3dprintingprofiles\/\" target=\"_blank\" title=\"More Details\" rel=\"noopener noreferrer\"\u003e For more details on the material profiles visit Ultrafuse here\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/UM-Ultrafuse-all-files-285MM.xml.zip?4573629787021071464\" target=\"_blank\" title=\"Download Ultrafuse Material Profiles\" rel=\"noopener noreferrer\"\u003e\u003ci class=\"fa fa-arrow-circle-o-down\"\u003e\u003c\/i\u003e Download All files Ultrafuse Ultimaker 3D Printers All colors\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eTechnical Information\u003c\/h5\u003e\n\u003cp class=\"p1\"\u003e\u003cem\u003e\u003cstrong\u003ePET is recommended as THE intermediate printing filament. It's versatility with great mechanical and thermal performance. Natural PET has the highest level of optical clarity in the plastics world.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eData Sheets\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/Ultrafuse_-_PET_-_Technical_Data_Sheet_v3.2.pdf?v=1584528972\" target=\"_blank\" title=\"Download technical data sheet\" rel=\"noopener noreferrer\"\u003e\u003ci class=\"fa fa-arrow-circle-o-down\" aria-hidden=\"true\"\u003e\u003c\/i\u003e Download Technical Data Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/Ultrafuse_-_PET_-_Safety_data_sheet_v3.0.pdf?v=1584528972\" title=\"Download safety data sheet\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003ci class=\"fa fa-arrow-circle-o-down\" aria-hidden=\"true\"\u003e\u003c\/i\u003e Download Safety Data Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eUltimaker Material Alliance\u003c\/h5\u003e\n\u003cp\u003eChoosing the right material is critical to the success of your 3D print. Ultimaker's open filament system lets you print with any 2.85 mm filament, and print profiles from the Ultimaker Marketplace streamline print preparation and maximize your print success rate.\u003c\/p\u003e\n\n\u003ca class=\"btn btn-primary btn-sm\" href=\"https:\/\/3dgbire.com\/pages\/ultimaker-material-alliance\"\u003eFind out more\u003c\/a\u003e","brand":"INNO","offers":[{"title":"Default Title","offer_id":30310422151221,"sku":"1303120029","price":20.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/b2590a4c-6f16-4f49-b2de-91b745fb9f91.jpg?v=1776072323"},{"product_id":"basf-pet-black-filament-2-85mm-750g-default-lv","title":"Forward AM Ultrafuse InnoPET Black | 2.85mm | 750g","description":"\u003ch5\u003e\u003cbr\u003e\u003c\/h5\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eDescription\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/h5\u003e\n\u003cdiv class=\"col-1-2 left editor\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUltrafuse® PET  (previously Innofil3D PET, different name, same high-quality product!)is made from a premium, food approved PET (Polyethylene terephthalate).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePET is widely used to produce food and beverage containers and bottles.\u003cbr data-mce-fragment=\"1\"\u003eThis high-quality filament will give you outstanding printing results: good layer adhesion, high resolution and easy to handle.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIt has a natural transparent, smooth look. Ultrafuse PET can be 100% recycled.\u003c\/p\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eQuality\u003c\/h5\u003e\n\u003cdiv class=\"col-1-2 left editor\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWe select the best raw materials available from renowned suppliers.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDedicated people, highest standards.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eProduction on our state-of-the-art computer-controlled machinery guarantees a truly consistent filament, also between colors and batches.\u003cbr data-mce-fragment=\"1\"\u003eIt will perform as expected, every time.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eAll our products are 100% traceable to the source.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eTips \u0026amp; tricks\u003c\/h5\u003e\n\u003cdiv class=\"col-1-2 left editor\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTo make the best prints with Ultrafuse PET, we use the following settings on an Ultimaker and Wanhao Duplicator;\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTemperature at 210 degrees\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHeated bed at 75 degrees\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSpeed between 30 and 70mm\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eReady with printing? The heated bed should cool down and you just can take the print off of your bed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eDownloads\u003c\/h5\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eTechnical \u0026amp; Mechanical data sheet\u003c\/h3\u003e\n\u003cdiv class=\"col-1-1 left editor\" data-mce-fragment=\"1\"\u003e\n\u003ca class=\"button\" href=\"https:\/\/www.ultrafusefff.com\/wp-content\/uploads\/2016\/06\/Ultrafuse_PET_TDS_EN_v3.2.pdf\" data-mce-fragment=\"1\" target=\"_blank\" data-mce-href=\"https:\/\/www.ultrafusefff.com\/wp-content\/uploads\/2016\/06\/Ultrafuse_PET_TDS_EN_v3.2.pdf\"\u003eTechnical data sheet\u003c\/a\u003e\u003ca class=\"button\" href=\"https:\/\/www.ultrafusefff.com\/wp-content\/uploads\/2016\/06\/ULTRAFUSE%C2%AEPETNATURAL_11120970_SDS_GEN_EU_EN_2-0_NL07.pdf\" data-mce-fragment=\"1\" target=\"_blank\" data-mce-href=\"https:\/\/www.ultrafusefff.com\/wp-content\/uploads\/2016\/06\/ULTRAFUSE%C2%AEPETNATURAL_11120970_SDS_GEN_EU_EN_2-0_NL07.pdf\"\u003eMechanical safety data sheet\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp align=\"JUSTIFY\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"INNO","offers":[{"title":"Default Title","offer_id":30310422839349,"sku":"1303120032","price":20.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/c927a592-ce5f-4638-8855-d1e277fd3c92.webp?v=1775037134"},{"product_id":"basf-forward-am-utrafuse-rpet-natural-blue-2-85mm-750g","title":"Forward AM Utrafuse rPET | Natural Blue | 2.85mm | 750g","description":"\u003ch5 data-mce-fragment=\"1\"\u003eDetails\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"col-1-2 left editor\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUltrafuse rPET (recycled Polyethylene Terephthalate) is made from recycled PET.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe recycled material is a food-approved grade and has a natural transparent blueish look.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWe predict a bright future for this material: it is environmentally friendly, has excellent 3D printing properties and good mechanical characteristics.\u003c\/p\u003e\n\u003ch5\u003eQuality\u003c\/h5\u003e\n\u003cdiv class=\"col-1-2 left editor\"\u003e\n\u003cp\u003eWe select the best raw materials available from renowned suppliers.\u003c\/p\u003e\n\u003cp\u003eDedicated people, highest standards.\u003c\/p\u003e\n\u003cp\u003eProduction on our state-of-the-art computer controlled machinery guarantees a truly consistent filament, also between colors and batches.\u003cbr\u003eIt will perform as expected, every time.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAll our products are 100% traceable to the source.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003ch3\u003eTechnical \u0026amp; Mechanical data sheet\u003c\/h3\u003e\n\u003cdiv class=\"col-1-1 left editor\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/Ultrafuse_rPET_TDS_EN_v3.2.pdf?v=1734430433\" class=\"button\" target=\"_blank\" rel=\"noopener\"\u003eTechnical data sheet\u003c\/a\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-1-1 left editor\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/ULTRAFUSE_RPET_11121810_SDS_GEN_00_EN_2-0_NL07.pdf?v=1734430501\" class=\"button\" target=\"_blank\" rel=\"noopener\"\u003eMechanical safety data sheet\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Forward AM","offers":[{"title":"Default Title","offer_id":41142847373365,"sku":"1303120033","price":13.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/products\/Ultrafuse-RPET-Natural-Blue-160219008711.jpg?v=1654844956"},{"product_id":"innofil-epr-pet-black-1-75mm-2500g","title":"Forward AM Ultrafuse PET Black | 1.75mm | 2500g","description":"\u003ch5 data-mce-fragment=\"1\"\u003eDescription\u003cbr\u003e\n\u003c\/h5\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\n\u003cdiv class=\"col-1-2 left editor\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUltrafuse® PET  (previously Innofil3D PET, different name, same high-quality product!)is made from a premium, food approved PET (Polyethylene terephthalate).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePET is widely used to produce food and beverage containers and bottles.\u003cbr data-mce-fragment=\"1\"\u003eThis high-quality filament will give you outstanding printing results: good layer adhesion, high resolution and easy to handle.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIt has a natural transparent, smooth look. Ultrafuse PET can be 100% recycled.\u003c\/p\u003e\n\u003ch5\u003eQuality\u003c\/h5\u003e\n\u003cdiv class=\"col-1-2 left editor\"\u003e\n\u003cp\u003eWe select the best raw materials available from renowned suppliers.\u003c\/p\u003e\n\u003cp\u003eDedicated people, highest standards.\u003c\/p\u003e\n\u003cp\u003eProduction on our state-of-the-art computer-controlled machinery guarantees a truly consistent filament, also between colors and batches.\u003cbr\u003eIt will perform as expected, every time.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAll our products are 100% traceable to the source.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eTips \u0026amp; tricks\u003c\/h5\u003e\n\u003cdiv class=\"col-1-2 left editor\"\u003e\n\u003cp\u003eTo make the best prints with Ultrafuse PET, we use the following settings on an Ultimaker and Wanhao Duplicator;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTemperature at 210 degrees\u003c\/li\u003e\n\u003cli\u003eHeated bed at 75 degrees\u003c\/li\u003e\n\u003cli\u003eSpeed between 30 and 70mm\u003c\/li\u003e\n\u003cli\u003eReady with printing? The heated bed should cool down and you just can take the print off of your bed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003ch3\u003eTechnical \u0026amp; Mechanical data sheet\u003c\/h3\u003e\n\u003cdiv class=\"col-1-1 left editor\"\u003e\n\u003ca href=\"https:\/\/www.ultrafusefff.com\/wp-content\/uploads\/2016\/06\/Ultrafuse_PET_TDS_EN_v3.2.pdf\" class=\"button\" target=\"_blank\"\u003eTechnical data sheet\u003c\/a\u003e\u003ca href=\"https:\/\/www.ultrafusefff.com\/wp-content\/uploads\/2016\/06\/ULTRAFUSE%C2%AEPETNATURAL_11120970_SDS_GEN_EU_EN_2-0_NL07.pdf\" class=\"button\" target=\"_blank\"\u003eMechanical safety data sheet\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Forward AM","offers":[{"title":"Default Title","offer_id":41265629233205,"sku":"1303120007","price":54.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/products\/Innofil-pet-black_4df1f06b-3ae4-4a05-bfb0-95368869941f.jpg?v=1656654515"},{"product_id":"innofil-epr-pet-black-1-75mm-4500g","title":"Forward AM Ultrafuse PET Black | 1.75mm | 4500g","description":"\u003ch5 data-mce-fragment=\"1\"\u003eDescription\u003cbr\u003e\n\u003c\/h5\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\n\u003cdiv class=\"col-1-2 left editor\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUltrafuse® PET  (previously Innofil3D PET, different name, same high-quality product!)is made from a premium, food approved PET (Polyethylene terephthalate).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePET is widely used to produce food and beverage containers and bottles.\u003cbr data-mce-fragment=\"1\"\u003eThis high-quality filament will give you outstanding printing results: good layer adhesion, high resolution and easy to handle.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIt has a natural transparent, smooth look. Ultrafuse PET can be 100% recycled.\u003c\/p\u003e\n\u003ch5\u003eQuality\u003c\/h5\u003e\n\u003cdiv class=\"col-1-2 left editor\"\u003e\n\u003cp\u003eWe select the best raw materials available from renowned suppliers.\u003c\/p\u003e\n\u003cp\u003eDedicated people, highest standards.\u003c\/p\u003e\n\u003cp\u003eProduction on our state-of-the-art computer-controlled machinery guarantees a truly consistent filament, also between colors and batches.\u003cbr\u003eIt will perform as expected, every time.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAll our products are 100% traceable to the source.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eTips \u0026amp; tricks\u003c\/h5\u003e\n\u003cdiv class=\"col-1-2 left editor\"\u003e\n\u003cp\u003eTo make the best prints with Ultrafuse PET, we use the following settings on an Ultimaker and Wanhao Duplicator;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTemperature at 210 degrees\u003c\/li\u003e\n\u003cli\u003eHeated bed at 75 degrees\u003c\/li\u003e\n\u003cli\u003eSpeed between 30 and 70mm\u003c\/li\u003e\n\u003cli\u003eReady with printing? The heated bed should cool down and you just can take the print off of your bed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003ch3\u003eTechnical \u0026amp; Mechanical data sheet\u003c\/h3\u003e\n\u003cdiv class=\"col-1-1 left editor\"\u003e\n\u003ca href=\"https:\/\/www.ultrafusefff.com\/wp-content\/uploads\/2016\/06\/Ultrafuse_PET_TDS_EN_v3.2.pdf\" class=\"button\" target=\"_blank\"\u003eTechnical data sheet\u003c\/a\u003e\u003ca href=\"https:\/\/www.ultrafusefff.com\/wp-content\/uploads\/2016\/06\/ULTRAFUSE%C2%AEPETNATURAL_11120970_SDS_GEN_EU_EN_2-0_NL07.pdf\" class=\"button\" target=\"_blank\"\u003eMechanical safety data sheet\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Forward AM","offers":[{"title":"Default Title","offer_id":41265629298741,"sku":"1303120006","price":96.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/products\/Innofil-pet-black_d945244d-1b4a-4b6a-bfa3-340208b878f1.jpg?v=1656654519"},{"product_id":"innofil3d-epr-pet-black-1-75mm-8500g","title":"Forward AM Ultrafuse PET Black | 1.75mm | 8500g","description":"\u003ch5 data-mce-fragment=\"1\"\u003eDescription\u003cbr\u003e\n\u003c\/h5\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\n\u003cdiv class=\"col-1-2 left editor\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUltrafuse® PET  (previously Innofil3D PET, different name, same high-quality product!)is made from a premium, food approved PET (Polyethylene terephthalate).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePET is widely used to produce food and beverage containers and bottles.\u003cbr data-mce-fragment=\"1\"\u003eThis high-quality filament will give you outstanding printing results: good layer adhesion, high resolution and easy to handle.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIt has a natural transparent, smooth look. Ultrafuse PET can be 100% recycled.\u003c\/p\u003e\n\u003ch5\u003eQuality\u003c\/h5\u003e\n\u003cdiv class=\"col-1-2 left editor\"\u003e\n\u003cp\u003eWe select the best raw materials available from renowned suppliers.\u003c\/p\u003e\n\u003cp\u003eDedicated people, highest standards.\u003c\/p\u003e\n\u003cp\u003eProduction on our state-of-the-art computer-controlled machinery guarantees a truly consistent filament, also between colors and batches.\u003cbr\u003eIt will perform as expected, every time.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAll our products are 100% traceable to the source.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eTips \u0026amp; tricks\u003c\/h5\u003e\n\u003cdiv class=\"col-1-2 left editor\"\u003e\n\u003cp\u003eTo make the best prints with Ultrafuse PET, we use the following settings on an Ultimaker and Wanhao Duplicator;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTemperature at 210 degrees\u003c\/li\u003e\n\u003cli\u003eHeated bed at 75 degrees\u003c\/li\u003e\n\u003cli\u003eSpeed between 30 and 70mm\u003c\/li\u003e\n\u003cli\u003eReady with printing? The heated bed should cool down and you just can take the print off of your bed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003ch3\u003eTechnical \u0026amp; Mechanical data sheet\u003c\/h3\u003e\n\u003cdiv class=\"col-1-1 left editor\"\u003e\n\u003ca href=\"https:\/\/www.ultrafusefff.com\/wp-content\/uploads\/2016\/06\/Ultrafuse_PET_TDS_EN_v3.2.pdf\" class=\"button\" target=\"_blank\"\u003eTechnical data sheet\u003c\/a\u003e\u003ca href=\"https:\/\/www.ultrafusefff.com\/wp-content\/uploads\/2016\/06\/ULTRAFUSE%C2%AEPETNATURAL_11120970_SDS_GEN_EU_EN_2-0_NL07.pdf\" class=\"button\" target=\"_blank\"\u003eMechanical safety data sheet\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Forward AM","offers":[{"title":"Default Title","offer_id":41265629593653,"sku":"1303120005","price":182.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/products\/Innofil-pet-black_e7388f62-ff3a-43ad-b172-07ebf4c9224c.jpg?v=1656654523"},{"product_id":"innofil3d-epr-pet-black-2-85mm-750g-2500g","title":"Forward AM Ultrafuse PET Black | 2.85mm | 2500g","description":"\u003ch5 data-mce-fragment=\"1\"\u003eDescription\u003cbr\u003e\n\u003c\/h5\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\n\u003cdiv class=\"col-1-2 left editor\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUltrafuse® PET  (previously Innofil3D PET, different name, same high-quality product!)is made from a premium, food approved PET (Polyethylene terephthalate).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePET is widely used to produce food and beverage containers and bottles.\u003cbr data-mce-fragment=\"1\"\u003eThis high-quality filament will give you outstanding printing results: good layer adhesion, high resolution and easy to handle.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIt has a natural transparent, smooth look. Ultrafuse PET can be 100% recycled.\u003c\/p\u003e\n\u003ch5\u003eQuality\u003c\/h5\u003e\n\u003cdiv class=\"col-1-2 left editor\"\u003e\n\u003cp\u003eWe select the best raw materials available from renowned suppliers.\u003c\/p\u003e\n\u003cp\u003eDedicated people, highest standards.\u003c\/p\u003e\n\u003cp\u003eProduction on our state-of-the-art computer-controlled machinery guarantees a truly consistent filament, also between colors and batches.\u003cbr\u003eIt will perform as expected, every time.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAll our products are 100% traceable to the source.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eTips \u0026amp; tricks\u003c\/h5\u003e\n\u003cdiv class=\"col-1-2 left editor\"\u003e\n\u003cp\u003eTo make the best prints with Ultrafuse PET, we use the following settings on an Ultimaker and Wanhao Duplicator;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTemperature at 210 degrees\u003c\/li\u003e\n\u003cli\u003eHeated bed at 75 degrees\u003c\/li\u003e\n\u003cli\u003eSpeed between 30 and 70mm\u003c\/li\u003e\n\u003cli\u003eReady with printing? The heated bed should cool down and you just can take the print off of your bed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003ch3\u003eTechnical \u0026amp; Mechanical data sheet\u003c\/h3\u003e\n\u003cdiv class=\"col-1-1 left editor\"\u003e\n\u003ca href=\"https:\/\/www.ultrafusefff.com\/wp-content\/uploads\/2016\/06\/Ultrafuse_PET_TDS_EN_v3.2.pdf\" class=\"button\" target=\"_blank\"\u003eTechnical data sheet\u003c\/a\u003e\u003ca href=\"https:\/\/www.ultrafusefff.com\/wp-content\/uploads\/2016\/06\/ULTRAFUSE%C2%AEPETNATURAL_11120970_SDS_GEN_EU_EN_2-0_NL07.pdf\" class=\"button\" target=\"_blank\"\u003eMechanical safety data sheet\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Forward AM","offers":[{"title":"Default Title","offer_id":41265629659189,"sku":"1303120008","price":54.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/products\/Innofil-pet-black_65a9f95c-908d-4188-9b16-910d51027151.jpg?v=1656654524"},{"product_id":"innofil-epr-pet-blue-1-75mm-750g","title":"Forward AM UltrafusePET Blue | 1.75mm | 750g","description":"\u003ch5 data-mce-fragment=\"1\"\u003eDescription\u003cbr\u003e\n\u003c\/h5\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\n\u003cdiv class=\"col-1-2 left editor\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUltrafuse® PET  (previously Innofil3D PET, different name, same high-quality product!)is made from a premium, food approved PET (Polyethylene terephthalate).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePET is widely used to produce food and beverage containers and bottles.\u003cbr data-mce-fragment=\"1\"\u003eThis high-quality filament will give you outstanding printing results: good layer adhesion, high resolution and easy to handle.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIt has a natural transparent, smooth look. Ultrafuse PET can be 100% recycled.\u003c\/p\u003e\n\u003ch5\u003eQuality\u003c\/h5\u003e\n\u003cdiv class=\"col-1-2 left editor\"\u003e\n\u003cp\u003eWe select the best raw materials available from renowned suppliers.\u003c\/p\u003e\n\u003cp\u003eDedicated people, highest standards.\u003c\/p\u003e\n\u003cp\u003eProduction on our state-of-the-art computer-controlled machinery guarantees a truly consistent filament, also between colors and batches.\u003cbr\u003eIt will perform as expected, every time.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAll our products are 100% traceable to the source.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eTips \u0026amp; tricks\u003c\/h5\u003e\n\u003cdiv class=\"col-1-2 left editor\"\u003e\n\u003cp\u003eTo make the best prints with Ultrafuse PET, we use the following settings on an Ultimaker and Wanhao Duplicator;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTemperature at 210 degrees\u003c\/li\u003e\n\u003cli\u003eHeated bed at 75 degrees\u003c\/li\u003e\n\u003cli\u003eSpeed between 30 and 70mm\u003c\/li\u003e\n\u003cli\u003eReady with printing? The heated bed should cool down and you just can take the print off of your bed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003ch3\u003eTechnical \u0026amp; Mechanical data sheet\u003c\/h3\u003e\n\u003cdiv class=\"col-1-1 left editor\"\u003e\n\u003ca href=\"https:\/\/www.ultrafusefff.com\/wp-content\/uploads\/2016\/06\/Ultrafuse_PET_TDS_EN_v3.2.pdf\" class=\"button\" target=\"_blank\"\u003eTechnical data sheet\u003c\/a\u003e\u003ca href=\"https:\/\/www.ultrafusefff.com\/wp-content\/uploads\/2016\/06\/ULTRAFUSE%C2%AEPETNATURAL_11120970_SDS_GEN_EU_EN_2-0_NL07.pdf\" class=\"button\" target=\"_blank\"\u003eMechanical safety data sheet\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Forward AM","offers":[{"title":"Default Title","offer_id":41265629823029,"sku":"1303120017","price":18.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/c0d12745-2349-49d8-8f3a-14c86b42768b.jpg?v=1775037114"},{"product_id":"innofil3d-pet-blue-filament-2-85mm-750g-default-lv","title":"Forward AM Ultrafuse PET Blue | 2.85mm | 750g","description":"\u003ch5 data-mce-fragment=\"1\"\u003eDescription\u003cbr\u003e\n\u003c\/h5\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\n\u003cdiv class=\"col-1-2 left editor\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUltrafuse® PET  (previously Innofil3D PET, different name, same high-quality product!)is made from a premium, food approved PET (Polyethylene terephthalate).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePET is widely used to produce food and beverage containers and bottles.\u003cbr data-mce-fragment=\"1\"\u003eThis high-quality filament will give you outstanding printing results: good layer adhesion, high resolution and easy to handle.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIt has a natural transparent, smooth look. Ultrafuse PET can be 100% recycled.\u003c\/p\u003e\n\u003ch5\u003eQuality\u003c\/h5\u003e\n\u003cdiv class=\"col-1-2 left editor\"\u003e\n\u003cp\u003eWe select the best raw materials available from renowned suppliers.\u003c\/p\u003e\n\u003cp\u003eDedicated people, highest standards.\u003c\/p\u003e\n\u003cp\u003eProduction on our state-of-the-art computer-controlled machinery guarantees a truly consistent filament, also between colors and batches.\u003cbr\u003eIt will perform as expected, every time.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAll our products are 100% traceable to the source.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eTips \u0026amp; tricks\u003c\/h5\u003e\n\u003cdiv class=\"col-1-2 left editor\"\u003e\n\u003cp\u003eTo make the best prints with Ultrafuse PET, we use the following settings on an Ultimaker and Wanhao Duplicator;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTemperature at 210 degrees\u003c\/li\u003e\n\u003cli\u003eHeated bed at 75 degrees\u003c\/li\u003e\n\u003cli\u003eSpeed between 30 and 70mm\u003c\/li\u003e\n\u003cli\u003eReady with printing? The heated bed should cool down and you just can take the print off of your bed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003ch3\u003eTechnical \u0026amp; Mechanical data sheet\u003c\/h3\u003e\n\u003cdiv class=\"col-1-1 left editor\"\u003e\n\u003ca href=\"https:\/\/www.ultrafusefff.com\/wp-content\/uploads\/2016\/06\/Ultrafuse_PET_TDS_EN_v3.2.pdf\" class=\"button\" target=\"_blank\"\u003eTechnical data sheet\u003c\/a\u003e\u003ca href=\"https:\/\/www.ultrafusefff.com\/wp-content\/uploads\/2016\/06\/ULTRAFUSE%C2%AEPETNATURAL_11120970_SDS_GEN_EU_EN_2-0_NL07.pdf\" class=\"button\" target=\"_blank\"\u003eMechanical safety data sheet\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Forward AM","offers":[{"title":"Default Title","offer_id":41265629954101,"sku":"1303120031","price":22.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/products\/db87baaa-204f-4d9c-9a84-cbe9ddfcccde_58e7cc49-987e-4c8a-b279-8950df75ec4d.jpg?v=1656654531"},{"product_id":"innofil3d-pet-green-filament-2-85mm-750g-default-lv","title":"Forward AM Ultrafuse PET Green | 2.85mm | 750g","description":"\u003ch5 data-mce-fragment=\"1\"\u003eDescription\u003cbr\u003e\n\u003c\/h5\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\n\u003cdiv class=\"col-1-2 left editor\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUltrafuse® PET  (previously Innofil3D PET, different name, same high-quality product!)is made from a premium, food approved PET (Polyethylene terephthalate).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePET is widely used to produce food and beverage containers and bottles.\u003cbr data-mce-fragment=\"1\"\u003eThis high-quality filament will give you outstanding printing results: good layer adhesion, high resolution and easy to handle.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIt has a natural transparent, smooth look. Ultrafuse PET can be 100% recycled.\u003c\/p\u003e\n\u003ch5\u003eQuality\u003c\/h5\u003e\n\u003cdiv class=\"col-1-2 left editor\"\u003e\n\u003cp\u003eWe select the best raw materials available from renowned suppliers.\u003c\/p\u003e\n\u003cp\u003eDedicated people, highest standards.\u003c\/p\u003e\n\u003cp\u003eProduction on our state-of-the-art computer-controlled machinery guarantees a truly consistent filament, also between colors and batches.\u003cbr\u003eIt will perform as expected, every time.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAll our products are 100% traceable to the source.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eTips \u0026amp; tricks\u003c\/h5\u003e\n\u003cdiv class=\"col-1-2 left editor\"\u003e\n\u003cp\u003eTo make the best prints with Ultrafuse PET, we use the following settings on an Ultimaker and Wanhao Duplicator;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTemperature at 210 degrees\u003c\/li\u003e\n\u003cli\u003eHeated bed at 75 degrees\u003c\/li\u003e\n\u003cli\u003eSpeed between 30 and 70mm\u003c\/li\u003e\n\u003cli\u003eReady with printing? The heated bed should cool down and you just can take the print off of your bed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003ch3\u003eTechnical \u0026amp; Mechanical data sheet\u003c\/h3\u003e\n\u003cdiv class=\"col-1-1 left editor\"\u003e\n\u003ca href=\"https:\/\/www.ultrafusefff.com\/wp-content\/uploads\/2016\/06\/Ultrafuse_PET_TDS_EN_v3.2.pdf\" class=\"button\" target=\"_blank\"\u003eTechnical data sheet\u003c\/a\u003e\u003ca href=\"https:\/\/www.ultrafusefff.com\/wp-content\/uploads\/2016\/06\/ULTRAFUSE%C2%AEPETNATURAL_11120970_SDS_GEN_EU_EN_2-0_NL07.pdf\" class=\"button\" target=\"_blank\"\u003eMechanical safety data sheet\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Forward AM","offers":[{"title":"Default Title","offer_id":41265630445621,"sku":"1303120029","price":20.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/products\/Innofil-pet-green_806834d0-3f17-4fd0-be13-ea5a56601f8b.jpg?v=1656654537"},{"product_id":"innofil-epr-pet-1-75mm-2500g","title":"Forward AM Ultrafuse PET Natural Transparent | 1.75mm | 2500g","description":"\u003ch5 data-mce-fragment=\"1\"\u003eDescription\u003cbr\u003e\n\u003c\/h5\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\n\u003cdiv class=\"col-1-2 left editor\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUltrafuse® PET  (previously Innofil3D PET, different name, same high-quality product!)is made from a premium, food approved PET (Polyethylene terephthalate).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePET is widely used to produce food and beverage containers and bottles.\u003cbr data-mce-fragment=\"1\"\u003eThis high-quality filament will give you outstanding printing results: good layer adhesion, high resolution and easy to handle.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIt has a natural transparent, smooth look. Ultrafuse PET can be 100% recycled.\u003c\/p\u003e\n\u003ch5\u003eQuality\u003c\/h5\u003e\n\u003cdiv class=\"col-1-2 left editor\"\u003e\n\u003cp\u003eWe select the best raw materials available from renowned suppliers.\u003c\/p\u003e\n\u003cp\u003eDedicated people, highest standards.\u003c\/p\u003e\n\u003cp\u003eProduction on our state-of-the-art computer-controlled machinery guarantees a truly consistent filament, also between colors and batches.\u003cbr\u003eIt will perform as expected, every time.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAll our products are 100% traceable to the source.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eTips \u0026amp; tricks\u003c\/h5\u003e\n\u003cdiv class=\"col-1-2 left editor\"\u003e\n\u003cp\u003eTo make the best prints with Ultrafuse PET, we use the following settings on an Ultimaker and Wanhao Duplicator;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTemperature at 210 degrees\u003c\/li\u003e\n\u003cli\u003eHeated bed at 75 degrees\u003c\/li\u003e\n\u003cli\u003eSpeed between 30 and 70mm\u003c\/li\u003e\n\u003cli\u003eReady with printing? The heated bed should cool down and you just can take the print off of your bed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003ch3\u003eTechnical \u0026amp; Mechanical data sheet\u003c\/h3\u003e\n\u003cdiv class=\"col-1-1 left editor\"\u003e\n\u003ca href=\"https:\/\/www.ultrafusefff.com\/wp-content\/uploads\/2016\/06\/Ultrafuse_PET_TDS_EN_v3.2.pdf\" class=\"button\" target=\"_blank\"\u003eTechnical data sheet\u003c\/a\u003e\u003ca href=\"https:\/\/www.ultrafusefff.com\/wp-content\/uploads\/2016\/06\/ULTRAFUSE%C2%AEPETNATURAL_11120970_SDS_GEN_EU_EN_2-0_NL07.pdf\" class=\"button\" target=\"_blank\"\u003eMechanical safety data sheet\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Forward AM","offers":[{"title":"Default Title","offer_id":41265630543925,"sku":"1303120011","price":54.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/products\/Innofil-pet-natural_translucent_bf3ba418-30c4-430a-ad7a-682cdbe7e17e.jpg?v=1656654541"},{"product_id":"ultrafuse-pet-natural-1-75mm-4500g","title":"Forward AM Ultrafuse PET Natural | 1.75mm | 4500g","description":"\u003ch5 data-mce-fragment=\"1\"\u003eDescription\u003cbr\u003e\n\u003c\/h5\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\n\u003cdiv class=\"col-1-2 left editor\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUltrafuse® PET  (previously Innofil3D PET, different name, same high-quality product!)is made from a premium, food approved PET (Polyethylene terephthalate).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePET is widely used to produce food and beverage containers and bottles.\u003cbr data-mce-fragment=\"1\"\u003eThis high-quality filament will give you outstanding printing results: good layer adhesion, high resolution and easy to handle.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIt has a natural transparent, smooth look. Ultrafuse PET can be 100% recycled.\u003c\/p\u003e\n\u003ch5\u003eQuality\u003c\/h5\u003e\n\u003cdiv class=\"col-1-2 left editor\"\u003e\n\u003cp\u003eWe select the best raw materials available from renowned suppliers.\u003c\/p\u003e\n\u003cp\u003eDedicated people, highest standards.\u003c\/p\u003e\n\u003cp\u003eProduction on our state-of-the-art computer-controlled machinery guarantees a truly consistent filament, also between colors and batches.\u003cbr\u003eIt will perform as expected, every time.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAll our products are 100% traceable to the source.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eTips \u0026amp; tricks\u003c\/h5\u003e\n\u003cdiv class=\"col-1-2 left editor\"\u003e\n\u003cp\u003eTo make the best prints with Ultrafuse PET, we use the following settings on an Ultimaker and Wanhao Duplicator;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTemperature at 210 degrees\u003c\/li\u003e\n\u003cli\u003eHeated bed at 75 degrees\u003c\/li\u003e\n\u003cli\u003eSpeed between 30 and 70mm\u003c\/li\u003e\n\u003cli\u003eReady with printing? The heated bed should cool down and you just can take the print off of your bed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003ch3\u003eTechnical \u0026amp; Mechanical data sheet\u003c\/h3\u003e\n\u003cdiv class=\"col-1-1 left editor\"\u003e\n\u003ca href=\"https:\/\/www.ultrafusefff.com\/wp-content\/uploads\/2016\/06\/Ultrafuse_PET_TDS_EN_v3.2.pdf\" class=\"button\" target=\"_blank\"\u003eTechnical data sheet\u003c\/a\u003e\u003ca href=\"https:\/\/www.ultrafusefff.com\/wp-content\/uploads\/2016\/06\/ULTRAFUSE%C2%AEPETNATURAL_11120970_SDS_GEN_EU_EN_2-0_NL07.pdf\" class=\"button\" target=\"_blank\"\u003eMechanical safety data sheet\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Forward AM","offers":[{"title":"Default Title","offer_id":41265630674997,"sku":"1303120010","price":95.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/9beec81b-e3fd-4489-8e2c-9666c54ded6e.jpg?v=1775037105"},{"product_id":"innofil-epr-pet-1-75mm-750g","title":"Forward AM Ultrafuse PET Natural Transparent | 1.75mm | 750g","description":"\u003ch5 data-mce-fragment=\"1\"\u003eDescription\u003cbr\u003e\n\u003c\/h5\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\n\u003cdiv class=\"col-1-2 left editor\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUltrafuse® PET  (previously Innofil3D PET, different name, same high-quality product!)is made from a premium, food approved PET (Polyethylene terephthalate).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePET is widely used to produce food and beverage containers and bottles.\u003cbr data-mce-fragment=\"1\"\u003eThis high-quality filament will give you outstanding printing results: good layer adhesion, high resolution and easy to handle.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIt has a natural transparent, smooth look. Ultrafuse PET can be 100% recycled.\u003c\/p\u003e\n\u003ch5\u003eQuality\u003c\/h5\u003e\n\u003cdiv class=\"col-1-2 left editor\"\u003e\n\u003cp\u003eWe select the best raw materials available from renowned suppliers.\u003c\/p\u003e\n\u003cp\u003eDedicated people, highest standards.\u003c\/p\u003e\n\u003cp\u003eProduction on our state-of-the-art computer-controlled machinery guarantees a truly consistent filament, also between colors and batches.\u003cbr\u003eIt will perform as expected, every time.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAll our products are 100% traceable to the source.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eTips \u0026amp; tricks\u003c\/h5\u003e\n\u003cdiv class=\"col-1-2 left editor\"\u003e\n\u003cp\u003eTo make the best prints with Ultrafuse PET, we use the following settings on an Ultimaker and Wanhao Duplicator;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTemperature at 210 degrees\u003c\/li\u003e\n\u003cli\u003eHeated bed at 75 degrees\u003c\/li\u003e\n\u003cli\u003eSpeed between 30 and 70mm\u003c\/li\u003e\n\u003cli\u003eReady with printing? The heated bed should cool down and you just can take the print off of your bed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003ch3\u003eTechnical \u0026amp; Mechanical data sheet\u003c\/h3\u003e\n\u003cdiv class=\"col-1-1 left editor\"\u003e\n\u003ca href=\"https:\/\/www.ultrafusefff.com\/wp-content\/uploads\/2016\/06\/Ultrafuse_PET_TDS_EN_v3.2.pdf\" class=\"button\" target=\"_blank\"\u003eTechnical data sheet\u003c\/a\u003e\u003ca href=\"https:\/\/www.ultrafusefff.com\/wp-content\/uploads\/2016\/06\/ULTRAFUSE%C2%AEPETNATURAL_11120970_SDS_GEN_EU_EN_2-0_NL07.pdf\" class=\"button\" target=\"_blank\"\u003eMechanical safety data sheet\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Forward AM","offers":[{"title":"Default Title","offer_id":41265630838837,"sku":"1303120021","price":18.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/products\/c7f850cb-ca8f-41c8-9bd2-5d8c702e4caf.jpg?v=1696415475"},{"product_id":"innofil-epr-pet-1-75mm-8500g","title":"Forward AM Ultrafuse PET Natural Transparent | 1.75mm | 8500g","description":"\u003ch5 data-mce-fragment=\"1\"\u003eDescription\u003cbr\u003e\n\u003c\/h5\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\n\u003cdiv class=\"col-1-2 left editor\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUltrafuse® PET  (previously Innofil3D PET, different name, same high-quality product!)is made from a premium, food approved PET (Polyethylene terephthalate).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePET is widely used to produce food and beverage containers and bottles.\u003cbr data-mce-fragment=\"1\"\u003eThis high-quality filament will give you outstanding printing results: good layer adhesion, high resolution and easy to handle.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIt has a natural transparent, smooth look. Ultrafuse PET can be 100% recycled.\u003c\/p\u003e\n\u003ch5\u003eQuality\u003c\/h5\u003e\n\u003cdiv class=\"col-1-2 left editor\"\u003e\n\u003cp\u003eWe select the best raw materials available from renowned suppliers.\u003c\/p\u003e\n\u003cp\u003eDedicated people, highest standards.\u003c\/p\u003e\n\u003cp\u003eProduction on our state-of-the-art computer-controlled machinery guarantees a truly consistent filament, also between colors and batches.\u003cbr\u003eIt will perform as expected, every time.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAll our products are 100% traceable to the source.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eTips \u0026amp; tricks\u003c\/h5\u003e\n\u003cdiv class=\"col-1-2 left editor\"\u003e\n\u003cp\u003eTo make the best prints with Ultrafuse PET, we use the following settings on an Ultimaker and Wanhao Duplicator;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTemperature at 210 degrees\u003c\/li\u003e\n\u003cli\u003eHeated bed at 75 degrees\u003c\/li\u003e\n\u003cli\u003eSpeed between 30 and 70mm\u003c\/li\u003e\n\u003cli\u003eReady with printing? The heated bed should cool down and you just can take the print off of your bed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003ch3\u003eTechnical \u0026amp; Mechanical data sheet\u003c\/h3\u003e\n\u003cdiv class=\"col-1-1 left editor\"\u003e\n\u003ca href=\"https:\/\/www.ultrafusefff.com\/wp-content\/uploads\/2016\/06\/Ultrafuse_PET_TDS_EN_v3.2.pdf\" class=\"button\" target=\"_blank\"\u003eTechnical data sheet\u003c\/a\u003e\u003ca href=\"https:\/\/www.ultrafusefff.com\/wp-content\/uploads\/2016\/06\/ULTRAFUSE%C2%AEPETNATURAL_11120970_SDS_GEN_EU_EN_2-0_NL07.pdf\" class=\"button\" target=\"_blank\"\u003eMechanical safety data sheet\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Forward AM","offers":[{"title":"Default Title","offer_id":41265630904373,"sku":"1303120009","price":120.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/c4396473-3e8a-4f13-b42b-469a708b1adf.jpg?v=1775037086"},{"product_id":"innofil-epr-pet-2-85mm-2500g","title":"Forward AM Ultrafuse PET Natural Transparent | 2.85mm | 2500g","description":"\u003ch5 data-mce-fragment=\"1\"\u003eDescription\u003cbr\u003e\n\u003c\/h5\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"col-1-2 left editor\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUltrafuse® PET  (previously Innofil3D PET, different name, same high-quality product!)is made from a premium, food approved PET (Polyethylene terephthalate).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePET is widely used to produce food and beverage containers and bottles.\u003cbr data-mce-fragment=\"1\"\u003eThis high-quality filament will give you outstanding printing results: good layer adhesion, high resolution and easy to handle.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIt has a natural transparent, smooth look. Ultrafuse PET can be 100% recycled.\u003c\/p\u003e\n\u003ch5\u003eQuality\u003c\/h5\u003e\n\u003cdiv class=\"col-1-2 left editor\"\u003e\n\u003cp\u003eWe select the best raw materials available from renowned suppliers.\u003c\/p\u003e\n\u003cp\u003eDedicated people, highest standards.\u003c\/p\u003e\n\u003cp\u003eProduction on our state-of-the-art computer-controlled machinery guarantees a truly consistent filament, also between colors and batches.\u003cbr\u003eIt will perform as expected, every time.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAll our products are 100% traceable to the source.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eTips \u0026amp; tricks\u003c\/h5\u003e\n\u003cdiv class=\"col-1-2 left editor\"\u003e\n\u003cp\u003eTo make the best prints with Ultrafuse PET, we use the following settings on an Ultimaker and Wanhao Duplicator;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTemperature at 210 degrees\u003c\/li\u003e\n\u003cli\u003eHeated bed at 75 degrees\u003c\/li\u003e\n\u003cli\u003eSpeed between 30 and 70mm\u003c\/li\u003e\n\u003cli\u003eReady with printing? The heated bed should cool down and you just can take the print off of your bed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003ch3\u003eTechnical \u0026amp; Mechanical data sheet\u003c\/h3\u003e\n\u003cdiv class=\"col-1-1 left editor\"\u003e\n\u003ca class=\"button\" href=\"https:\/\/www.ultrafusefff.com\/wp-content\/uploads\/2016\/06\/Ultrafuse_PET_TDS_EN_v3.2.pdf\" target=\"_blank\"\u003eTechnical data sheet\u003c\/a\u003e\u003ca class=\"button\" href=\"https:\/\/www.ultrafusefff.com\/wp-content\/uploads\/2016\/06\/ULTRAFUSE%C2%AEPETNATURAL_11120970_SDS_GEN_EU_EN_2-0_NL07.pdf\" target=\"_blank\"\u003eMechanical safety data sheet\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Forward AM","offers":[{"title":"Default Title","offer_id":41265631002677,"sku":"1303120012","price":40.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/products\/Innofil-pet-natural_translucent_b820be12-f7ee-4e92-943b-8574120cc2c9.jpg?v=1656654546"},{"product_id":"innofil-epr-pet-red-1-75mm-750g","title":"Forward AM Ultrafuse PET Red | 1.75mm | 750g","description":"\u003ch5 data-mce-fragment=\"1\"\u003eDescription\u003cbr\u003e\n\u003c\/h5\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\n\u003cdiv class=\"col-1-2 left editor\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUltrafuse® PET  (previously Innofil3D PET, different name, same high-quality product!)is made from a premium, food approved PET (Polyethylene terephthalate).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePET is widely used to produce food and beverage containers and bottles.\u003cbr data-mce-fragment=\"1\"\u003eThis high-quality filament will give you outstanding printing results: good layer adhesion, high resolution and easy to handle.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIt has a natural transparent, smooth look. Ultrafuse PET can be 100% recycled.\u003c\/p\u003e\n\u003ch5\u003eQuality\u003c\/h5\u003e\n\u003cdiv class=\"col-1-2 left editor\"\u003e\n\u003cp\u003eWe select the best raw materials available from renowned suppliers.\u003c\/p\u003e\n\u003cp\u003eDedicated people, highest standards.\u003c\/p\u003e\n\u003cp\u003eProduction on our state-of-the-art computer-controlled machinery guarantees a truly consistent filament, also between colors and batches.\u003cbr\u003eIt will perform as expected, every time.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAll our products are 100% traceable to the source.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eTips \u0026amp; tricks\u003c\/h5\u003e\n\u003cdiv class=\"col-1-2 left editor\"\u003e\n\u003cp\u003eTo make the best prints with Ultrafuse PET, we use the following settings on an Ultimaker and Wanhao Duplicator;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTemperature at 210 degrees\u003c\/li\u003e\n\u003cli\u003eHeated bed at 75 degrees\u003c\/li\u003e\n\u003cli\u003eSpeed between 30 and 70mm\u003c\/li\u003e\n\u003cli\u003eReady with printing? The heated bed should cool down and you just can take the print off of your bed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003ch3\u003eTechnical \u0026amp; Mechanical data sheet\u003c\/h3\u003e\n\u003cdiv class=\"col-1-1 left editor\"\u003e\n\u003ca href=\"https:\/\/www.ultrafusefff.com\/wp-content\/uploads\/2016\/06\/Ultrafuse_PET_TDS_EN_v3.2.pdf\" class=\"button\" target=\"_blank\"\u003eTechnical data sheet\u003c\/a\u003e\u003ca href=\"https:\/\/www.ultrafusefff.com\/wp-content\/uploads\/2016\/06\/ULTRAFUSE%C2%AEPETNATURAL_11120970_SDS_GEN_EU_EN_2-0_NL07.pdf\" class=\"button\" target=\"_blank\"\u003eMechanical safety data sheet\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Forward AM","offers":[{"title":"Default Title","offer_id":41265631690805,"sku":"1303120018","price":22.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/35f695ef-45ed-452b-b8bc-915f9448974d.jpg?v=1775037111"},{"product_id":"innofil3d-pet-red-filament-2-85mm-750g-default-lv","title":"Forward AM Ultrafuse PET Red | 2.85mm | 750g","description":"\u003ch5 data-mce-fragment=\"1\"\u003eDescription\u003cbr\u003e\n\u003c\/h5\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\n\u003cdiv class=\"col-1-2 left editor\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUltrafuse® PET  (previously Innofil3D PET, different name, same high-quality product!)is made from a premium, food approved PET (Polyethylene terephthalate).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePET is widely used to produce food and beverage containers and bottles.\u003cbr data-mce-fragment=\"1\"\u003eThis high-quality filament will give you outstanding printing results: good layer adhesion, high resolution and easy to handle.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIt has a natural transparent, smooth look. Ultrafuse PET can be 100% recycled.\u003c\/p\u003e\n\u003ch5\u003eQuality\u003c\/h5\u003e\n\u003cdiv class=\"col-1-2 left editor\"\u003e\n\u003cp\u003eWe select the best raw materials available from renowned suppliers.\u003c\/p\u003e\n\u003cp\u003eDedicated people, highest standards.\u003c\/p\u003e\n\u003cp\u003eProduction on our state-of-the-art computer-controlled machinery guarantees a truly consistent filament, also between colors and batches.\u003cbr\u003eIt will perform as expected, every time.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAll our products are 100% traceable to the source.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eTips \u0026amp; tricks\u003c\/h5\u003e\n\u003cdiv class=\"col-1-2 left editor\"\u003e\n\u003cp\u003eTo make the best prints with Ultrafuse PET, we use the following settings on an Ultimaker and Wanhao Duplicator;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTemperature at 210 degrees\u003c\/li\u003e\n\u003cli\u003eHeated bed at 75 degrees\u003c\/li\u003e\n\u003cli\u003eSpeed between 30 and 70mm\u003c\/li\u003e\n\u003cli\u003eReady with printing? The heated bed should cool down and you just can take the print off of your bed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003ch3\u003eTechnical \u0026amp; Mechanical data sheet\u003c\/h3\u003e\n\u003cdiv class=\"col-1-1 left editor\"\u003e\n\u003ca href=\"https:\/\/www.ultrafusefff.com\/wp-content\/uploads\/2016\/06\/Ultrafuse_PET_TDS_EN_v3.2.pdf\" class=\"button\" target=\"_blank\"\u003eTechnical data sheet\u003c\/a\u003e\u003ca href=\"https:\/\/www.ultrafusefff.com\/wp-content\/uploads\/2016\/06\/ULTRAFUSE%C2%AEPETNATURAL_11120970_SDS_GEN_EU_EN_2-0_NL07.pdf\" class=\"button\" target=\"_blank\"\u003eMechanical safety data sheet\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Forward AM","offers":[{"title":"Default Title","offer_id":41265631756341,"sku":"1303120025","price":22.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/products\/Innofil-pet-red_732fabbb-933c-44a0-bf8e-9cc7d4603b3c.jpg?v=1656654560"},{"product_id":"innofil-epr-pet-white-1-75mm-2500g","title":"Forward AM Ultrafuse PET White | 1.75mm | 2500g","description":"\u003ch5 data-mce-fragment=\"1\"\u003eDescription\u003cbr\u003e\n\u003c\/h5\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\n\u003cdiv class=\"col-1-2 left editor\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUltrafuse® PET  (previously Innofil3D PET, different name, same high-quality product!)is made from a premium, food approved PET (Polyethylene terephthalate).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePET is widely used to produce food and beverage containers and bottles.\u003cbr data-mce-fragment=\"1\"\u003eThis high-quality filament will give you outstanding printing results: good layer adhesion, high resolution and easy to handle.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIt has a natural transparent, smooth look. Ultrafuse PET can be 100% recycled.\u003c\/p\u003e\n\u003ch5\u003eQuality\u003c\/h5\u003e\n\u003cdiv class=\"col-1-2 left editor\"\u003e\n\u003cp\u003eWe select the best raw materials available from renowned suppliers.\u003c\/p\u003e\n\u003cp\u003eDedicated people, highest standards.\u003c\/p\u003e\n\u003cp\u003eProduction on our state-of-the-art computer-controlled machinery guarantees a truly consistent filament, also between colors and batches.\u003cbr\u003eIt will perform as expected, every time.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAll our products are 100% traceable to the source.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eTips \u0026amp; tricks\u003c\/h5\u003e\n\u003cdiv class=\"col-1-2 left editor\"\u003e\n\u003cp\u003eTo make the best prints with Ultrafuse PET, we use the following settings on an Ultimaker and Wanhao Duplicator;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTemperature at 210 degrees\u003c\/li\u003e\n\u003cli\u003eHeated bed at 75 degrees\u003c\/li\u003e\n\u003cli\u003eSpeed between 30 and 70mm\u003c\/li\u003e\n\u003cli\u003eReady with printing? The heated bed should cool down and you just can take the print off of your bed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003ch3\u003eTechnical \u0026amp; Mechanical data sheet\u003c\/h3\u003e\n\u003cdiv class=\"col-1-1 left editor\"\u003e\n\u003ca href=\"https:\/\/www.ultrafusefff.com\/wp-content\/uploads\/2016\/06\/Ultrafuse_PET_TDS_EN_v3.2.pdf\" class=\"button\" target=\"_blank\"\u003eTechnical data sheet\u003c\/a\u003e\u003ca href=\"https:\/\/www.ultrafusefff.com\/wp-content\/uploads\/2016\/06\/ULTRAFUSE%C2%AEPETNATURAL_11120970_SDS_GEN_EU_EN_2-0_NL07.pdf\" class=\"button\" target=\"_blank\"\u003eMechanical safety data sheet\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Forward AM","offers":[{"title":"Default Title","offer_id":41265631887413,"sku":"1303120003","price":54.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/products\/Innofil-pet-white_5d5136ae-0c88-4cbe-ad05-b4d749a2cceb.jpg?v=1656654561"},{"product_id":"innofil-epr-pet-white-1-75mm-4500g","title":"Forward AM Ultrafuse PET White | 1.75mm | 4500g","description":"\u003ch5 data-mce-fragment=\"1\"\u003eDescription\u003cbr\u003e\n\u003c\/h5\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\n\u003cdiv class=\"col-1-2 left editor\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUltrafuse® PET  (previously Innofil3D PET, different name, same high-quality product!)is made from a premium, food approved PET (Polyethylene terephthalate).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePET is widely used to produce food and beverage containers and bottles.\u003cbr data-mce-fragment=\"1\"\u003eThis high-quality filament will give you outstanding printing results: good layer adhesion, high resolution and easy to handle.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIt has a natural transparent, smooth look. Ultrafuse PET can be 100% recycled.\u003c\/p\u003e\n\u003ch5\u003eQuality\u003c\/h5\u003e\n\u003cdiv class=\"col-1-2 left editor\"\u003e\n\u003cp\u003eWe select the best raw materials available from renowned suppliers.\u003c\/p\u003e\n\u003cp\u003eDedicated people, highest standards.\u003c\/p\u003e\n\u003cp\u003eProduction on our state-of-the-art computer-controlled machinery guarantees a truly consistent filament, also between colors and batches.\u003cbr\u003eIt will perform as expected, every time.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAll our products are 100% traceable to the source.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eTips \u0026amp; tricks\u003c\/h5\u003e\n\u003cdiv class=\"col-1-2 left editor\"\u003e\n\u003cp\u003eTo make the best prints with Ultrafuse PET, we use the following settings on an Ultimaker and Wanhao Duplicator;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTemperature at 210 degrees\u003c\/li\u003e\n\u003cli\u003eHeated bed at 75 degrees\u003c\/li\u003e\n\u003cli\u003eSpeed between 30 and 70mm\u003c\/li\u003e\n\u003cli\u003eReady with printing? The heated bed should cool down and you just can take the print off of your bed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003ch3\u003eTechnical \u0026amp; Mechanical data sheet\u003c\/h3\u003e\n\u003cdiv class=\"col-1-1 left editor\"\u003e\n\u003ca href=\"https:\/\/www.ultrafusefff.com\/wp-content\/uploads\/2016\/06\/Ultrafuse_PET_TDS_EN_v3.2.pdf\" class=\"button\" target=\"_blank\"\u003eTechnical data sheet\u003c\/a\u003e\u003ca href=\"https:\/\/www.ultrafusefff.com\/wp-content\/uploads\/2016\/06\/ULTRAFUSE%C2%AEPETNATURAL_11120970_SDS_GEN_EU_EN_2-0_NL07.pdf\" class=\"button\" target=\"_blank\"\u003eMechanical safety data sheet\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Forward AM","offers":[{"title":"Default Title","offer_id":41265632018485,"sku":"1303120002","price":96.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/products\/00a6a337-82f4-45a8-98b8-a5e9062e3c10_259eb3ff-ab3e-421e-a9e7-6e592b97963e.jpg?v=1656654562"},{"product_id":"innofil-epr-pet-white-1-75mm-8500g","title":"Forward AM Ultrafuse PET White | 1.75mm | 8500g","description":"\u003ch5 data-mce-fragment=\"1\"\u003eDescription\u003cbr\u003e\n\u003c\/h5\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\n\u003cdiv class=\"col-1-2 left editor\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUltrafuse® PET  (previously Innofil3D PET, different name, same high-quality product!)is made from a premium, food approved PET (Polyethylene terephthalate).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePET is widely used to produce food and beverage containers and bottles.\u003cbr data-mce-fragment=\"1\"\u003eThis high-quality filament will give you outstanding printing results: good layer adhesion, high resolution and easy to handle.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIt has a natural transparent, smooth look. Ultrafuse PET can be 100% recycled.\u003c\/p\u003e\n\u003ch5\u003eQuality\u003c\/h5\u003e\n\u003cdiv class=\"col-1-2 left editor\"\u003e\n\u003cp\u003eWe select the best raw materials available from renowned suppliers.\u003c\/p\u003e\n\u003cp\u003eDedicated people, highest standards.\u003c\/p\u003e\n\u003cp\u003eProduction on our state-of-the-art computer-controlled machinery guarantees a truly consistent filament, also between colors and batches.\u003cbr\u003eIt will perform as expected, every time.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAll our products are 100% traceable to the source.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eTips \u0026amp; tricks\u003c\/h5\u003e\n\u003cdiv class=\"col-1-2 left editor\"\u003e\n\u003cp\u003eTo make the best prints with Ultrafuse PET, we use the following settings on an Ultimaker and Wanhao Duplicator;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTemperature at 210 degrees\u003c\/li\u003e\n\u003cli\u003eHeated bed at 75 degrees\u003c\/li\u003e\n\u003cli\u003eSpeed between 30 and 70mm\u003c\/li\u003e\n\u003cli\u003eReady with printing? The heated bed should cool down and you just can take the print off of your bed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003ch3\u003eTechnical \u0026amp; Mechanical data sheet\u003c\/h3\u003e\n\u003cdiv class=\"col-1-1 left editor\"\u003e\n\u003ca href=\"https:\/\/www.ultrafusefff.com\/wp-content\/uploads\/2016\/06\/Ultrafuse_PET_TDS_EN_v3.2.pdf\" class=\"button\" target=\"_blank\"\u003eTechnical data sheet\u003c\/a\u003e\u003ca href=\"https:\/\/www.ultrafusefff.com\/wp-content\/uploads\/2016\/06\/ULTRAFUSE%C2%AEPETNATURAL_11120970_SDS_GEN_EU_EN_2-0_NL07.pdf\" class=\"button\" target=\"_blank\"\u003eMechanical safety data sheet\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Forward AM","offers":[{"title":"Default Title","offer_id":41265632116789,"sku":"1303120001","price":182.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/products\/Innofil-pet-white_216fb813-cf95-4491-88eb-0fa15a881dd4.jpg?v=1656654565"},{"product_id":"innofil-epr-pet-white-2-85mm-2500g","title":"Forward AM Ultrafuse PET White | 2.85mm | 2500g","description":"\u003ch5 data-mce-fragment=\"1\"\u003eDescription\u003cbr\u003e\n\u003c\/h5\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\n\u003cdiv class=\"col-1-2 left editor\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUltrafuse® PET  (previously Innofil3D PET, different name, same high-quality product!)is made from a premium, food approved PET (Polyethylene terephthalate).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePET is widely used to produce food and beverage containers and bottles.\u003cbr data-mce-fragment=\"1\"\u003eThis high-quality filament will give you outstanding printing results: good layer adhesion, high resolution and easy to handle.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIt has a natural transparent, smooth look. Ultrafuse PET can be 100% recycled.\u003c\/p\u003e\n\u003ch5\u003eQuality\u003c\/h5\u003e\n\u003cdiv class=\"col-1-2 left editor\"\u003e\n\u003cp\u003eWe select the best raw materials available from renowned suppliers.\u003c\/p\u003e\n\u003cp\u003eDedicated people, highest standards.\u003c\/p\u003e\n\u003cp\u003eProduction on our state-of-the-art computer-controlled machinery guarantees a truly consistent filament, also between colors and batches.\u003cbr\u003eIt will perform as expected, every time.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAll our products are 100% traceable to the source.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eTips \u0026amp; tricks\u003c\/h5\u003e\n\u003cdiv class=\"col-1-2 left editor\"\u003e\n\u003cp\u003eTo make the best prints with Ultrafuse PET, we use the following settings on an Ultimaker and Wanhao Duplicator;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTemperature at 210 degrees\u003c\/li\u003e\n\u003cli\u003eHeated bed at 75 degrees\u003c\/li\u003e\n\u003cli\u003eSpeed between 30 and 70mm\u003c\/li\u003e\n\u003cli\u003eReady with printing? The heated bed should cool down and you just can take the print off of your bed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003ch3\u003eTechnical \u0026amp; Mechanical data sheet\u003c\/h3\u003e\n\u003cdiv class=\"col-1-1 left editor\"\u003e\n\u003ca href=\"https:\/\/www.ultrafusefff.com\/wp-content\/uploads\/2016\/06\/Ultrafuse_PET_TDS_EN_v3.2.pdf\" class=\"button\" target=\"_blank\"\u003eTechnical data sheet\u003c\/a\u003e\u003ca href=\"https:\/\/www.ultrafusefff.com\/wp-content\/uploads\/2016\/06\/ULTRAFUSE%C2%AEPETNATURAL_11120970_SDS_GEN_EU_EN_2-0_NL07.pdf\" class=\"button\" target=\"_blank\"\u003eMechanical safety data sheet\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Forward AM","offers":[{"title":"Default Title","offer_id":41265632182325,"sku":"1303120004","price":50.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/83ec17e8-e4c3-43f7-9bb7-37b70bdaa5a7.jpg?v=1775037065"},{"product_id":"innofil3d-pet-white-filament-2-85mm-750g-default-lv","title":"Forward AM Ultrafuse PET White | 2.85mm | 750g","description":"\u003ch5 data-mce-fragment=\"1\"\u003eDescription\u003cbr\u003e\n\u003c\/h5\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"col-1-2 left editor\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUltrafuse® PET  (previously Innofil3D PET, different name, same high-quality product!)is made from a premium, food approved PET (Polyethylene terephthalate).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePET is widely used to produce food and beverage containers and bottles.\u003cbr data-mce-fragment=\"1\"\u003eThis high-quality filament will give you outstanding printing results: good layer adhesion, high resolution and easy to handle.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIt has a natural transparent, smooth look. Ultrafuse PET can be 100% recycled.\u003c\/p\u003e\n\u003ch5\u003eQuality\u003c\/h5\u003e\n\u003cdiv class=\"col-1-2 left editor\"\u003e\n\u003cp\u003eWe select the best raw materials available from renowned suppliers.\u003c\/p\u003e\n\u003cp\u003eDedicated people, highest standards.\u003c\/p\u003e\n\u003cp\u003eProduction on our state-of-the-art computer-controlled machinery guarantees a truly consistent filament, also between colors and batches.\u003cbr\u003eIt will perform as expected, every time.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAll our products are 100% traceable to the source.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eTips \u0026amp; tricks\u003c\/h5\u003e\n\u003cdiv class=\"col-1-2 left editor\"\u003e\n\u003cp\u003eTo make the best prints with Ultrafuse PET, we use the following settings on an Ultimaker and Wanhao Duplicator;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTemperature at 210 degrees\u003c\/li\u003e\n\u003cli\u003eHeated bed at 75 degrees\u003c\/li\u003e\n\u003cli\u003eSpeed between 30 and 70mm\u003c\/li\u003e\n\u003cli\u003eReady with printing? The heated bed should cool down and you just can take the print off of your bed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003ch3\u003eTechnical \u0026amp; Mechanical data sheet\u003c\/h3\u003e\n\u003cdiv class=\"col-1-1 left editor\"\u003e\n\u003ca class=\"button\" href=\"https:\/\/www.ultrafusefff.com\/wp-content\/uploads\/2016\/06\/Ultrafuse_PET_TDS_EN_v3.2.pdf\" target=\"_blank\"\u003eTechnical data sheet\u003c\/a\u003e\u003ca class=\"button\" href=\"https:\/\/www.ultrafusefff.com\/wp-content\/uploads\/2016\/06\/ULTRAFUSE%C2%AEPETNATURAL_11120970_SDS_GEN_EU_EN_2-0_NL07.pdf\" target=\"_blank\"\u003eMechanical safety data sheet\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Forward AM","offers":[{"title":"Default Title","offer_id":41265632346165,"sku":"1303120024","price":20.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/723aa72c-1729-4f69-9964-46cf8ce87bb6.jpg?v=1775037138"},{"product_id":"innofil-epr-pet-yellow-1-75mm-750g","title":"Forward AM Ultrafuse PET Yellow | 1.75mm | 750g","description":"\u003ch5 data-mce-fragment=\"1\"\u003eDescription\u003cbr\u003e\n\u003c\/h5\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\n\u003cdiv class=\"col-1-2 left editor\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUltrafuse® PET  (previously Innofil3D PET, different name, same high-quality product!)is made from a premium, food approved PET (Polyethylene terephthalate).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePET is widely used to produce food and beverage containers and bottles.\u003cbr data-mce-fragment=\"1\"\u003eThis high-quality filament will give you outstanding printing results: good layer adhesion, high resolution and easy to handle.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIt has a natural transparent, smooth look. Ultrafuse PET can be 100% recycled.\u003c\/p\u003e\n\u003ch5\u003eQuality\u003c\/h5\u003e\n\u003cdiv class=\"col-1-2 left editor\"\u003e\n\u003cp\u003eWe select the best raw materials available from renowned suppliers.\u003c\/p\u003e\n\u003cp\u003eDedicated people, highest standards.\u003c\/p\u003e\n\u003cp\u003eProduction on our state-of-the-art computer-controlled machinery guarantees a truly consistent filament, also between colors and batches.\u003cbr\u003eIt will perform as expected, every time.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAll our products are 100% traceable to the source.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eTips \u0026amp; tricks\u003c\/h5\u003e\n\u003cdiv class=\"col-1-2 left editor\"\u003e\n\u003cp\u003eTo make the best prints with Ultrafuse PET, we use the following settings on an Ultimaker and Wanhao Duplicator;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTemperature at 210 degrees\u003c\/li\u003e\n\u003cli\u003eHeated bed at 75 degrees\u003c\/li\u003e\n\u003cli\u003eSpeed between 30 and 70mm\u003c\/li\u003e\n\u003cli\u003eReady with printing? The heated bed should cool down and you just can take the print off of your bed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003ch3\u003eTechnical \u0026amp; Mechanical data sheet\u003c\/h3\u003e\n\u003cdiv class=\"col-1-1 left editor\"\u003e\n\u003ca href=\"https:\/\/www.ultrafusefff.com\/wp-content\/uploads\/2016\/06\/Ultrafuse_PET_TDS_EN_v3.2.pdf\" class=\"button\" target=\"_blank\"\u003eTechnical data sheet\u003c\/a\u003e\u003ca href=\"https:\/\/www.ultrafusefff.com\/wp-content\/uploads\/2016\/06\/ULTRAFUSE%C2%AEPETNATURAL_11120970_SDS_GEN_EU_EN_2-0_NL07.pdf\" class=\"button\" target=\"_blank\"\u003eMechanical safety data sheet\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Forward AM","offers":[{"title":"Default Title","offer_id":41265632575541,"sku":"1303120016","price":22.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/d2050f54-4701-46e1-8196-4daea16b310b.jpg?v=1775037150"},{"product_id":"innofil3d-pet-yellow-filament-2-85mm-750g-default-lv","title":"Forward AM Ultrafuse PET Yellow | 2.85mm | 750g","description":"\u003ch5 data-mce-fragment=\"1\"\u003eDescription\u003cbr\u003e\n\u003c\/h5\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\n\u003cdiv class=\"col-1-2 left editor\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUltrafuse® PET  (previously Innofil3D PET, different name, same high-quality product!)is made from a premium, food approved PET (Polyethylene terephthalate).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePET is widely used to produce food and beverage containers and bottles.\u003cbr data-mce-fragment=\"1\"\u003eThis high-quality filament will give you outstanding printing results: good layer adhesion, high resolution and easy to handle.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIt has a natural transparent, smooth look. Ultrafuse PET can be 100% recycled.\u003c\/p\u003e\n\u003ch5\u003eQuality\u003c\/h5\u003e\n\u003cdiv class=\"col-1-2 left editor\"\u003e\n\u003cp\u003eWe select the best raw materials available from renowned suppliers.\u003c\/p\u003e\n\u003cp\u003eDedicated people, highest standards.\u003c\/p\u003e\n\u003cp\u003eProduction on our state-of-the-art computer-controlled machinery guarantees a truly consistent filament, also between colors and batches.\u003cbr\u003eIt will perform as expected, every time.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAll our products are 100% traceable to the source.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eTips \u0026amp; tricks\u003c\/h5\u003e\n\u003cdiv class=\"col-1-2 left editor\"\u003e\n\u003cp\u003eTo make the best prints with Ultrafuse PET, we use the following settings on an Ultimaker and Wanhao Duplicator;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTemperature at 210 degrees\u003c\/li\u003e\n\u003cli\u003eHeated bed at 75 degrees\u003c\/li\u003e\n\u003cli\u003eSpeed between 30 and 70mm\u003c\/li\u003e\n\u003cli\u003eReady with printing? The heated bed should cool down and you just can take the print off of your bed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003ch3\u003eTechnical \u0026amp; Mechanical data sheet\u003c\/h3\u003e\n\u003cdiv class=\"col-1-1 left editor\"\u003e\n\u003ca href=\"https:\/\/www.ultrafusefff.com\/wp-content\/uploads\/2016\/06\/Ultrafuse_PET_TDS_EN_v3.2.pdf\" class=\"button\" target=\"_blank\"\u003eTechnical data sheet\u003c\/a\u003e\u003ca href=\"https:\/\/www.ultrafusefff.com\/wp-content\/uploads\/2016\/06\/ULTRAFUSE%C2%AEPETNATURAL_11120970_SDS_GEN_EU_EN_2-0_NL07.pdf\" class=\"button\" target=\"_blank\"\u003eMechanical safety data sheet\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Forward AM","offers":[{"title":"Default Title","offer_id":41265632673845,"sku":"1303120023","price":22.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/ceb0e2b2-381c-4d53-9ee6-906056c379bc.jpg?v=1775037119"},{"product_id":"basf-forward-am-ultrafuse-pet-black-2-85mm-750g","title":"Forward AM Utrafuse rPET | Natural Blue | 1.75mm | 750g","description":"\u003ch5 data-mce-fragment=\"1\"\u003eDetails\u003c\/h5\u003e\n\u003cdiv class=\"col-1-2 left editor\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUltrafuse rPET (recycled Polyethylene Terephthalate) is made from recycled PET.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe recycled material is a food-approved grade and has a natural transparent blueish look.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWe predict a bright future for this material: it is environmentally friendly, has excellent 3D printing properties and good mechanical characteristics.\u003c\/p\u003e\n\u003ch5\u003eQuality\u003c\/h5\u003e\n\u003cdiv class=\"col-1-2 left editor\"\u003e\n\u003cp\u003eWe select the best raw materials available from renowned suppliers.\u003c\/p\u003e\n\u003cp\u003eDedicated people, highest standards.\u003c\/p\u003e\n\u003cp\u003eProduction on our state-of-the-art computer controlled machinery guarantees a truly consistent filament, also between colors and batches.\u003cbr\u003eIt will perform as expected, every time.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAll our products are 100% traceable to the source.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003ch3\u003eTechnical \u0026amp; Mechanical data sheet\u003c\/h3\u003e\n\u003cdiv class=\"col-1-1 left editor\"\u003e\u003ca class=\"button\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/Ultrafuse_rPET_TDS_EN_v3.2.pdf?v=1734430433\" target=\"_blank\" rel=\"noopener\"\u003eTechnical data sheet\u003c\/a\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-1-1 left editor\"\u003e\u003ca class=\"button\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/ULTRAFUSE_RPET_11121810_SDS_GEN_00_EN_2-0_NL07.pdf?v=1734430501\" target=\"_blank\" rel=\"noopener\"\u003eMechanical safety data sheet\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-1-2 left editor\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"col-1-2 left editor\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"col-1-2 left editor\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Forward AM","offers":[{"title":"Default Title","offer_id":41433955532853,"sku":"1303120034","price":13.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/products\/191f8c8a-cd85-4cf2-9bf9-d76436eecd8a_f1590ad8-333e-43bc-a225-a53affbef0ce.webp?v=1666266260"},{"product_id":"raise3d-industrial-pet-cf-black-1-75mm-1kg","title":"Raise3D Industrial PET CF Black | 1.75mm | 1kg","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eRaise3D Industrial PET CF is a carbon fiber-reinforced composite filament based on PET (Polyethylene terephthalate).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCompared to carbon fiber-reinforced Nylon filament, the high printability, dimensional stability, high creep resistance and low moisture absorption makes PET CF an ideal choice for reliable carbon fiber composite printing for strong and cost-effective end-use applications, such as jigs. fixtures, functional parts.\u003c\/p\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eTechnical Information\u003c\/h5\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eData Sheets\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ci aria-hidden=\"true\" class=\"fa fa-arrow-circle-o-down\" data-mce-fragment=\"1\"\u003e\u003c\/i\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/Raise3D-Industrial-PET-CF_TDS_V2.pdf?v=1675427573\" title=\"Download technical data sheet\"\u003eDownload Technical Data Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ci aria-hidden=\"true\" class=\"fa fa-arrow-circle-o-down\" data-mce-fragment=\"1\"\u003e\u003c\/i\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/Raise3D_Industrial-PET-CF_SDS_V1.pdf?v=1675427572\" title=\"Download safety data sheet\"\u003eDownload Safety Data Sheet\u003c\/a\u003e\u003c\/p\u003e","brand":"RAISE","offers":[{"title":"Default Title","offer_id":42102526869557,"sku":"1103130001","price":72.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/products\/00c6e302-4279-4463-b93f-b892677aacec.png?v=1676370085"},{"product_id":"ultimaker-petcf-bundle","title":"UltiMaker PET Carbon Fiber Expansion Kit","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe PET CF Expansion Kit includes everything you need to start printing high-performance parts on an UltiMaker S series printer so that you can get the full power of carbon fiber composite parts, combined with the seamless workflow and ease of use of the UltiMaker platform.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"col-md-6\"\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg src=\"https:\/\/ultimaker.com\/wp-content\/uploads\/2023\/06\/s-series-PETCF-application1.png\" width=\"401\" height=\"340\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003eFunctional prototyping\u003c\/h2\u003e\n\u003cp class=\"medium__size--text\"\u003eCreate functional prototypes with high-performance properties including impressive strength, stiffness, and temperature resistance. Use an engineering-grade material for your engineering prototypes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-md-6\"\u003e\n\u003cp class=\"medium__size--text\"\u003e\u003cimg src=\"https:\/\/ultimaker.com\/wp-content\/uploads\/2023\/06\/s-series-PETCF-application2.png\" width=\"402\" height=\"341\"\u003e\u003c\/p\u003e\n\u003ch2\u003eTooling and fixtures\u003c\/h2\u003e\n\u003cp class=\"medium__size--text\"\u003eUltiMaker PET CF is the perfect material for your manufacturing needs. It provides the performance and versatility for a wide range of applications: such as jigs, fixtures, and end-of-arm tooling.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-md-3\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-md-6\"\u003e\n\u003cp class=\"medium__size--text\"\u003e\u003cimg src=\"https:\/\/ultimaker.com\/wp-content\/uploads\/2023\/06\/s-series-PETCF-application3.png\" width=\"401\" height=\"340\"\u003e\u003c\/p\u003e\n\u003ch2\u003eReplacement parts and auxiliary components\u003c\/h2\u003e\n\u003cp class=\"medium__size--text\"\u003eUltiMaker PET CF is the perfect solution for replacing broken or hard-to-source parts. You no longer need to shut down a production line for days or weeks while waiting for a replacement. Instead, you can print a new part using PET CF, even when you need it to be strong or temperature-resistant.\u003c\/p\u003e\n\u003c\/div\u003e\u003cdiv class=\"col-md-3\"\u003e\u003c\/div\u003e\n\u003ch5 class=\"medium__size--text\"\u003eWhats Included?\u003c\/h5\u003e\n\u003cp\u003eThe UltiMaker PET Carbon Fiber Expansion Kit includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"caption__medium--text\"\u003e 2x spools of PET CF Black\u003c\/li\u003e\n\u003cli class=\"caption__medium--text\"\u003e 1x spool of PET CF Gray\u003c\/li\u003e\n\u003cli class=\"caption__medium--text\"\u003e 1x spool of PET CF Blue\u003c\/li\u003e\n\u003cli class=\"caption__medium--text\"\u003e UltiMaker Print Core CC 0.4\u003c\/li\u003e\n\u003cli class=\"caption__medium--text\"\u003e UltiMaker Print Core CC 0.6\u003c\/li\u003e\n\u003cli class=\"caption__medium--text\"\u003e Free Ultimaker Cura software with optimized PET CF annealing slicing features\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 class=\"medium__size--text\"\u003eTechnical\u003c\/h5\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\" data-mce-style=\"width: 33%;\"\u003e\n\u003cp\u003e\u003cstrong\u003ePrint Core\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 28.319%;\" data-mce-style=\"width: 28.319%;\"\u003e\n\u003cp\u003e\u003cstrong\u003eHardness\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e76 Shore D\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 32.681%;\" data-mce-style=\"width: 32.681%;\"\u003e\n\u003cp\u003e\u003cstrong\u003eImpact Strength\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e8.6 kJ\/m²\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\" data-mce-style=\"width: 33%;\"\u003e\n\u003cp\u003e\u003cstrong\u003eThermal Resistance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e76°C\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 28.319%;\" data-mce-style=\"width: 28.319%;\"\u003e\n\u003cp\u003e\u003cstrong\u003eSpool Weight\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e750 g\u003cbr\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 32.681%;\" data-mce-style=\"width: 32.681%;\"\u003e\n\u003cp\u003e\u003cstrong\u003eFilament Diameter\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2.85 mm\u003cbr\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"UGB","offers":[{"title":"Default Title","offer_id":42396919562293,"sku":"1003120021","price":1030.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/s-series-PET-Carbon-Fiber-Kit-single.png?v=1689092122"},{"product_id":"raise3d-industrial-pet-gf-filament-black-1kg-1-75mm","title":"Raise3D Industrial PET GF Filament Black 1kg (1.75mm)","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eRaise3D Industrial PET GF is a glass fiber-reinforced composite filament based on PET (Polyethylene terephthalate). Well-dispersed glass fibers enhance the rigidity, strength, heat, and chemical resistance of PET matrix. After annealing, PET GF stabilizes its heat resistance at around 120 ℃, with tensile modulus and strength of over 4.1 GPa and 70 MPa respectively. Compared to glass fiber-reinforced Nylon filament, the high printability, dimensional stability, high creep resistance, and low moisture absorption makes PET GF an ideal choice for reliable glass fiber composite printing for strong and cost-effective end-use applications, such as jigs \u0026amp; fixture and functional parts. In addition, PET GF provides multiple color choices.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis filament is compatible with\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/3dgbire.com\/products\/raise3d-industrial-pet-support-filament-natural\"\u003eRaise3D Industrial PET Support Filament\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDownload \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/Raise3D-Industrial-PET-GF_TDS_V1.pdf?v=1699960191\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDownload \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/Raise3D_Industrial-PET-GF_SDS_V1.pdf?v=1699963189\"\u003eSafety Data Sheet\u003c\/a\u003e\u003c\/p\u003e","brand":"RAISE","offers":[{"title":"Default Title","offer_id":42718319214645,"sku":"1103120005","price":63.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/b3139b3e-18f7-4f00-bf07-3a5e0784b07a.jpg?v=1776170118"},{"product_id":"raise3d-industrial-pet-gf-filament-orange-1kg-1-75mm","title":"Raise3D Industrial PET GF Filament Orange 1kg (1.75mm)","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eRaise3D Industrial PET GF is a glass fiber-reinforced composite filament based on PET (Polyethylene terephthalate). Well-dispersed glass fibers enhance the rigidity, strength, heat, and chemical resistance of PET matrix. After annealing, PET GF stabilizes its heat resistance at around 120 ℃, with tensile modulus and strength of over 4.1 GPa and 70 MPa respectively. Compared to glass fiber-reinforced Nylon filament, the high printability, dimensional stability, high creep resistance, and low moisture absorption makes PET GF an ideal choice for reliable glass fiber composite printing for strong and cost-effective end-use applications, such as jigs \u0026amp; fixture and functional parts. In addition, PET GF provides multiple color choices.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis filament is compatible with\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/3dgbire.com\/products\/raise3d-industrial-pet-support-filament-natural\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/3dgbire.com\/products\/raise3d-industrial-pet-support-filament-natural\"\u003eRaise3D Industrial PET Support Filament\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDownload\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/Raise3D-Industrial-PET-GF_TDS_V1.pdf?v=1699960191\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/Raise3D-Industrial-PET-GF_TDS_V1.pdf?v=1699960191\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDownload\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/Raise3D_Industrial-PET-GF_SDS_V1.pdf?v=1699963189\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/Raise3D_Industrial-PET-GF_SDS_V1.pdf?v=1699963189\"\u003eSafety Data Sheet\u003c\/a\u003e\u003c\/p\u003e","brand":"RAISE","offers":[{"title":"Default Title","offer_id":42718319280181,"sku":"1103120006","price":63.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/Raise3D_Shop_inside_PETGFOrange_1_600x600_4b5d450c-9f21-4b0f-8620-1700075eb6eb.webp?v=1699965177"},{"product_id":"raise3d-industrial-pet-gf-filament-grey-1kg-1-75mm","title":"Raise3D Industrial PET GF Filament Grey 1kg (1.75mm)","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eRaise3D Industrial PET GF is a glass fiber-reinforced composite filament based on PET (Polyethylene terephthalate). Well-dispersed glass fibers enhance the rigidity, strength, heat, and chemical resistance of PET matrix. After annealing, PET GF stabilizes its heat resistance at around 120 ℃, with tensile modulus and strength of over 4.1 GPa and 70 MPa respectively. Compared to glass fiber-reinforced Nylon filament, the high printability, dimensional stability, high creep resistance, and low moisture absorption makes PET GF an ideal choice for reliable glass fiber composite printing for strong and cost-effective end-use applications, such as jigs \u0026amp; fixture and functional parts. In addition, PET GF provides multiple color choices.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis filament is compatible with\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/3dgbire.com\/products\/raise3d-industrial-pet-support-filament-natural\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/3dgbire.com\/products\/raise3d-industrial-pet-support-filament-natural\"\u003eRaise3D Industrial PET Support Filament\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDownload\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/Raise3D-Industrial-PET-GF_TDS_V1.pdf?v=1699960191\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/Raise3D-Industrial-PET-GF_TDS_V1.pdf?v=1699960191\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDownload\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/Raise3D_Industrial-PET-GF_SDS_V1.pdf?v=1699963189\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/Raise3D_Industrial-PET-GF_SDS_V1.pdf?v=1699963189\"\u003eSafety Data Sheet\u003c\/a\u003e\u003c\/p\u003e","brand":"3DGBIRE Ltd","offers":[{"title":"Default Title","offer_id":42718319312949,"sku":"1103120007","price":63.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/Raise3D_Shop_inside_PETGFGrey_1_600x600_0fb58c56-c5bb-4b40-bca1-430b602188c3.webp?v=1699964501"},{"product_id":"raise3d-industrial-pet-gf-filament-red-1kg-1-75mm","title":"Raise3D Industrial PET GF Filament Red 1kg (1.75mm)","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eRaise3D Industrial PET GF is a glass fiber-reinforced composite filament based on PET (Polyethylene terephthalate). Well-dispersed glass fibers enhance the rigidity, strength, heat, and chemical resistance of PET matrix. After annealing, PET GF stabilizes its heat resistance at around 120 ℃, with tensile modulus and strength of over 4.1 GPa and 70 MPa respectively. Compared to glass fiber-reinforced Nylon filament, the high printability, dimensional stability, high creep resistance, and low moisture absorption makes PET GF an ideal choice for reliable glass fiber composite printing for strong and cost-effective end-use applications, such as jigs \u0026amp; fixture and functional parts. In addition, PET GF provides multiple color choices.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis filament is compatible with\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/3dgbire.com\/products\/raise3d-industrial-pet-support-filament-natural\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/3dgbire.com\/products\/raise3d-industrial-pet-support-filament-natural\"\u003eRaise3D Industrial PET Support Filament\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDownload\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/Raise3D-Industrial-PET-GF_TDS_V1.pdf?v=1699960191\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/Raise3D-Industrial-PET-GF_TDS_V1.pdf?v=1699960191\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDownload\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/Raise3D_Industrial-PET-GF_SDS_V1.pdf?v=1699963189\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/Raise3D_Industrial-PET-GF_SDS_V1.pdf?v=1699963189\"\u003eSafety Data Sheet\u003c\/a\u003e\u003c\/p\u003e","brand":"RAISE","offers":[{"title":"Default Title","offer_id":42718319345717,"sku":"1103120008","price":63.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/Raise3D_Shop_inside_PETGFRed_1_600x600_954f686a-6167-4272-8e52-e67ab8c76ea3.webp?v=1699964169"},{"product_id":"raise3d-industrial-pet-support-filament-natural","title":"Raise3D Industrial PET Support Filament Natural","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eColor: Natural (PMS: Cool Gre y 1 \/ RAL: 9010)\u003cbr data-mce-fragment=\"1\"\u003eSpecifications: 1.75 mm\/ 1 kg\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eRaise3D Industrial PET Support Filament is a break-away support material specially designed for FFF printing with fiber reinforced filaments. In contrast to printing supports using the same material, PET support filament is easier to remove and allows for detailed surface quality and dimensional accuracy. Compared to water soluble support materials, the lower moisture absorption and the performance-cost ratio of PET support both make it an ideal alternative to BVOH or PVA.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis filament is compatible with\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePET CF, PET GF, and other CF filaments.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDownload \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/Raise3D-Industrial-PET-Support_TDS_V1.pdf?v=1699960646\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDownload \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/Raise3D_Industrial-PET-Support_SDS_V1.pdf?v=1699960719\"\u003eSaftey Data Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e","brand":"RAISE","offers":[{"title":"Default Title","offer_id":42718382653493,"sku":"1103120004","price":36.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/Raise3D_Shop_inside_Support-1.jpg?v=1699960596"},{"product_id":"ultimaker-pet-cf-black-2-85mm-750g","title":"UltiMaker PET CF Black | 2.85mm | 750g","description":"\u003cstyle\u003e\n  .table-wrapper {\n    overflow-x: auto;\n  }\n    .space {\n    padding: 1em;\n  }\n  details summary {\n    background: #eeeeee;\n  }\n  details summary:hover {\n    color: #fff !important;\n  }\n   details summary:hover i {\n     filter: invert(100);\n   }\n  \n\n  details[open] summary {\n    color: #fff !important;\n  }\n\n  details[open] i {\n    filter: invert(100);\n  }\n  .rev-row {\n     flex-wrap: wrap-reverse;\n  }\n\u003c\/style\u003e\n\n\u003cp\u003ePET CF is easier to print than most composites. It is more resistant to moisture and when kept in an UltiMaker Material Station, it should remain dry. Unlike other composite materials, PET CF is also available in multiple colours: black, blue, and gray. PET CF is compatible with UltiMaker support materials (PVA and Breakaway) giving full geometric freedom when designing parts. Finally, parts printed with PET CF can be annealed to improve their temperature resistance from 80 °C to a phenomenal 181 °C, as well as\u003cbr\u003eincreasing their strength by 30% and stiffness by 10%. All of this can be done using the recommended and validated BINDER FP115 programmable oven.\u003c\/p\u003e\n\n    \u003cdiv class=\"table-wrapper\"\u003e\n      \u003ctable class=\"table\"\u003e\n        \u003ctr\u003e\n          \u003cth\u003eApplications\u003c\/th\u003e\n          \u003cth\u003eNot Suitable For\u003c\/th\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eFunctional prototyping, tooling, manufacturing aids\u003c\/td\u003e\n          \u003ctd\u003e\n            In vivo parts applications. Applications where the printed parts are\n            exposed to temperatures higher than 76°C or the annealed printed\n            parts are exposed to temperatures higher than 181°C.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/table\u003e\n    \u003c\/div\u003e\n\n\u003ch5\u003eTechnnical Specifications\u003c\/h5\u003e\n  \u003cdetails name=\"spec\" open\u003e\n      \u003csummary\u003e\n        Filament Specifications \u003ci class=\"fa-solid fa-chevron-right\"\u003e\u003c\/i\u003e\n      \u003c\/summary\u003e\n    \u003cdiv classs=\"table-wrapper\"\u003e\n          \u003ctable class=\"table\"\u003e\n      \u003ctr\u003e\n        \u003cth\u003eDiameter\u003c\/th\u003e\n        \u003ctd\u003e2.85mm\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003cth\u003eMax. roundness deviation\u003c\/th\u003e\n        \u003ctd\u003e0.1mm\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003cth\u003eNet Filament Weight\u003c\/th\u003e\n        \u003ctd\u003e750g\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003cth\u003eFilament Length\u003c\/th\u003e\n        \u003ctd\u003e~85m\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/table\u003e\n    \u003c\/div\u003e\n  \u003c\/details\u003e\n    \u003cdetails name=\"spec\"\u003e\n      \u003csummary\u003e\n        Colour Information \u003ci class=\"fa-solid fa-chevron-right\"\u003e\u003c\/i\u003e\n      \u003c\/summary\u003e\n          \u003cdiv class=\"table-wrapper\"\u003e\n      \u003ctable class=\"table\"\u003e\n        \u003ctr\u003e\n          \u003cth\u003eColours\u003c\/th\u003e\n          \u003cth\u003eColour Code\u003c\/th\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eBlack\u003c\/td\u003e\n          \u003ctd\u003eRAL 9017\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eBlue\u003c\/td\u003e\n          \u003ctd\u003eRAL 5009\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eGrey\u003c\/td\u003e\n          \u003ctd\u003eRAL 7049\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/table\u003e\n    \u003c\/div\u003e\n    \u003c\/details\u003e\n        \u003cdetails name=\"spec\"\u003e\n      \u003csummary\u003e\n        Mechanical Properties \u003ci class=\"fa-solid fa-chevron-right\"\u003e\u003c\/i\u003e\n      \u003c\/summary\u003e\n            \u003cdiv class=\"table-wrapper\"\u003e\n      \u003ctable class=\"table\"\u003e\n        \u003ctr\u003e\n          \u003cth\u003e\u003c\/th\u003e\n          \u003cth\u003eTest Method\u003c\/th\u003e\n          \u003cth\u003eTypical value XY (flat)\u003c\/th\u003e\n          \u003cth\u003eTypical value YZ (side)\u003c\/th\u003e\n          \u003cth\u003eTypical value Z (up)\u003c\/th\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eTensile (Young's) modulus\u003c\/td\u003e\n          \u003ctd\u003eASTM D3039 (1 mm \/ min)\u003c\/td\u003e\n          \u003ctd\u003e4342 ± 89 MPa\u003c\/td\u003e\n          \u003ctd\u003e8568 ± 130 Mpa\u003c\/td\u003e\n          \u003ctd\u003e2230 ± 102 MPa\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eTensile stress at yield\u003c\/td\u003e\n          \u003ctd\u003eASTM D3039 (5 mm \/ min)\u003c\/td\u003e\n          \u003ctd\u003e50.6 ± 0.6 MPa\u003c\/td\u003e\n          \u003ctd\u003e75.2 ± 0.8 MPa\u003c\/td\u003e\n          \u003ctd\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eTensile stress at break\u003c\/td\u003e\n          \u003ctd\u003eASTM D3039 (5 mm \/ min)\u003c\/td\u003e\n          \u003ctd\u003e49.3 ± 0.6 MPa\u003c\/td\u003e\n          \u003ctd\u003e72.3 ± 1.0 MPa\u003c\/td\u003e\n          \u003ctd\u003e17.8 ± 1.2 MPa\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eElongation at yield\u003c\/td\u003e\n          \u003ctd\u003eASTM D3039 (5 mm \/ min)\u003c\/td\u003e\n          \u003ctd\u003e3.9 ± 0.1%\u003c\/td\u003e\n          \u003ctd\u003e3.5 ± 0.1%\u003c\/td\u003e\n          \u003ctd\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eElongation at break\u003c\/td\u003e\n          \u003ctd\u003eASTM D3039 (5 mm \/ min)\u003c\/td\u003e\n          \u003ctd\u003e5.5 ± 0.6%\u003c\/td\u003e\n          \u003ctd\u003e5.9 ± 1.3%\u003c\/td\u003e\n          \u003ctd\u003e1.3 ± 0.1%\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eFlexural modulus\u003c\/td\u003e\n          \u003ctd\u003eISO 178 (1 mm \/ min)\u003c\/td\u003e\n          \u003ctd\u003e5743 ± 150 MPa\u003c\/td\u003e\n          \u003ctd\u003e7667 ± 90 MPa\u003c\/td\u003e\n          \u003ctd\u003e2675 ± 33 MPa\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eFlexural strength\u003c\/td\u003e\n          \u003ctd\u003eISO 178 (5 mm \/ min)\u003c\/td\u003e\n          \u003ctd\u003e102.8 ± 2.6 MPa at 4.4% strain\u003c\/td\u003e\n          \u003ctd\u003e122.3 ± 2.2 MPa at 4.0% strain\u003c\/td\u003e\n          \u003ctd\u003e41.9 ± 3.2 MPa at 1.5% strain\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eFlexural strain at break\u003c\/td\u003e\n            \u003ctd\u003eISO 178 (5 mm \/ min)\u003c\/td\u003e\n            \u003ctd\u003eNo break (\u0026gt;10%)\u003c\/td\u003e\n            \u003ctd\u003eNo break (\u0026gt; 10%)\u003c\/td\u003e\n            \u003ctd\u003e1.5 ± 0.1%\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eCharpy impact strength (at 23 °C)\u003c\/td\u003e\n            \u003ctd\u003eISO 179-1 \/ 1eB (notched)\u003c\/td\u003e\n            \u003ctd\u003e8.6 ± 0.5 kJ\/m2\u003c\/td\u003e\n            \u003ctd\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eHardness\u003c\/td\u003e\n            \u003ctd\u003eISO 7619-1 (Durometer, Shore D) 76 Shore D\u003c\/td\u003e\n            \u003ctd\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/table\u003e\n    \u003c\/div\u003e\n        \u003c\/details\u003e\n    \u003cdetails name=\"spec\"\u003e\n      \u003csummary\u003e\n        Mechanical Properties (Annealed) \u003ci class=\"fa-solid fa-chevron-right\"\u003e\u003c\/i\u003e\n      \u003c\/summary\u003e\n          \u003cdiv class=\"table-wrapper\"\u003e\n      \u003ctable class=\"table\"\u003e\n        \u003ctr\u003e\n          \u003cth\u003e\u003c\/th\u003e\n          \u003cth\u003eTest Method\u003c\/th\u003e\n          \u003cth\u003eTypical value XY (flat)\u003c\/th\u003e\n          \u003cth\u003eTypical value YZ (side)\u003c\/th\u003e\n          \u003cth\u003eTypical value Z (up)\u003c\/th\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eTensile (Young's) modulus\u003c\/td\u003e\n          \u003ctd\u003eASTM D3039 (1 mm \/ min)\u003c\/td\u003e\n          \u003ctd\u003e5530 ± 124 MPa\u003c\/td\u003e\n          \u003ctd\u003e9810 ± 208 MPa\u003c\/td\u003e\n          \u003ctd\u003e2655 ± 130 MPa\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eTensile stress at yield\u003c\/td\u003e\n          \u003ctd\u003eASTM D3039 (5 mm \/ min)\u003c\/td\u003e\n          \u003ctd\u003e\u003c\/td\u003e\n          \u003ctd\u003e\u003c\/td\u003e\n          \u003ctd\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eTensile stress at break\u003c\/td\u003e\n          \u003ctd\u003eASTM D3039 (5 mm \/ min)\u003c\/td\u003e\n          \u003ctd\u003e72.8 ± 2.0 MPa\u003c\/td\u003e\n          \u003ctd\u003e104 ± 2.0 MPa\u003c\/td\u003e\n          \u003ctd\u003e18.2 ± 1.8 MPa\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eElongation at yield\u003c\/td\u003e\n          \u003ctd\u003eASTM D3039 (5 mm \/ min)\u003c\/td\u003e\n          \u003ctd\u003e\u003c\/td\u003e\n          \u003ctd\u003e\u003c\/td\u003e\n          \u003ctd\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eElongation at break\u003c\/td\u003e\n          \u003ctd\u003eASTM D3039 (5 mm \/ min)\u003c\/td\u003e\n          \u003ctd\u003e3.4 ± 0.2 %\u003c\/td\u003e\n          \u003ctd\u003e3.4 ± 0.2%\u003c\/td\u003e\n          \u003ctd\u003e1.0 ± 0.1 %\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eFlexural modulus\u003c\/td\u003e\n          \u003ctd\u003eISO 178 (1 mm \/ min)\u003c\/td\u003e\n          \u003ctd\u003e6280 ± 114 Mpa\u003c\/td\u003e\n          \u003ctd\u003e8691 ± 96 MPa\u003c\/td\u003e\n          \u003ctd\u003e2913 ± 58 MPa\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eFlexural strength\u003c\/td\u003e\n          \u003ctd\u003eISO 178 (5 mm \/ min)\u003c\/td\u003e\n          \u003ctd\u003e136.6 ± 2.8 MPa at 2.9% strain\u003c\/td\u003e\n          \u003ctd\u003e170.4 ± 1.3 MPa at 2.8% strain\u003c\/td\u003e\n          \u003ctd\u003e44.3 ± 4.9 MPa at 1.5% strain\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eFlexural strain at break\u003c\/td\u003e\n          \u003ctd\u003eISO 178 (5 mm \/ min)\u003c\/td\u003e\n          \u003ctd\u003e3.0 ± 0.1 %\u003c\/td\u003e\n          \u003ctd\u003e2.8 ± 0.1 %\u003c\/td\u003e\n          \u003ctd\u003e1.5 ± 0.1%\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eCharpy impact strength (at 23 °C)\u003c\/td\u003e\n          \u003ctd\u003eISO 179-1 \/ 1eB (notched)\u003c\/td\u003e\n          \u003ctd\u003e5.3 ± 0.9 kJ\/m2\u003c\/td\u003e\n          \u003ctd\u003e\u003c\/td\u003e\n          \u003ctd\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eHardness\u003c\/td\u003e\n          \u003ctd\u003eISO 7619-1 (Durometer, Shore D) 81 Shore D\u003c\/td\u003e\n          \u003ctd\u003e\u003c\/td\u003e\n          \u003ctd\u003e\u003c\/td\u003e\n          \u003ctd\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/table\u003e\n    \u003c\/div\u003e\n    \u003c\/details\u003e\n    \u003cdetails name=\"spec\"\u003e\n      \u003csummary\u003e\n        Print Orientation \u003ci class=\"fa-solid fa-chevron-right\"\u003e\u003c\/i\u003e\n      \u003c\/summary\u003e\n      \u003cp\u003eAs the FFF process produces part in a layered structure, mechan-\nical properties of the part vary depending on orientation of the part.\n\nIn-plane there are differences between walls (following the contours\nof the part) and infill (layer of 45° lines). These differences can be\nseen in the the data for XY (printed flat on the build plate - mostly\ninfill) and YZ (printed on its side - mostly walls). Additionally, the\nupright samples (Z direction) give information on the strength of the\ninterlayer adhesion of the material. Typically the interlayer strength\n(Z) has the lowest strength in FFF. Note: All samples are printed with\n100% infill\nof infill and walls in a printed part.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails name=\"spec\"\u003e\n      \u003csummary\u003e\n        Tensile Properties \u003ci class=\"fa-solid fa-chevron-right\"\u003e\u003c\/i\u003e\n      \u003c\/summary\u003e\n      \u003cp\u003ePrinted parts can yield before they break, where the material is\ndeforming (necking) before it breaks completely. When this is the\n\ncase, both the yield and break points will be reported. Typical mate-\nrials that yield before breaking are materials with high toughness like\n\nTough PLA, Nylon and CPE+. If the material simply breaks without\nyielding, only the break point will be reported. This is the case for\nbrittle materials like PLA and PC Transparant, as well as elastomers\n(like TPU).\u003c\/p\u003e\n    \u003c\/details\u003e\n   \u003cdetails name=\"spec\"\u003e\n      \u003csummary\u003e\n        Thermal Properties \u003ci class=\"fa-solid fa-chevron-right\"\u003e\u003c\/i\u003e\n      \u003c\/summary\u003e\n         \u003cdiv class=\"table-wrapper\"\u003e\n      \u003ctable class=\"table\"\u003e\n        \u003ctr\u003e\n          \u003cth\u003e\u003c\/th\u003e\n          \u003cth\u003eTest Method\u003c\/th\u003e\n          \u003cth\u003eTypical Value\u003c\/th\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMelt mass-flow rate (MFR)\u003c\/td\u003e\n          \u003ctd\u003eISO 1133 (280 °C, 2.16 kg)\u003c\/td\u003e\n          \u003ctd\u003e2.6 g \/ 10 min\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eHeat Deflection(HDT) at 0.455 MPa*\u003c\/td\u003e\n          \u003ctd\u003eISO 75-2 \/ B\u003c\/td\u003e\n          \u003ctd\u003e76.0 °C (non-annealed) \/ 181.0 °C (annealed)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eVicat softening temperature*\u003c\/td\u003e\n          \u003ctd\u003eISO 306 \/ A120\u003c\/td\u003e\n          \u003ctd\u003e92.0 °C (non-annealed) \/ \u0026gt; 235 °C (annealed)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eGlass transition\u003c\/td\u003e\n          \u003ctd\u003eISO 11357 (DSC, 10 °C\/min)\u003c\/td\u003e\n          \u003ctd\u003e78 °C\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMelting temperature\u003c\/td\u003e\n          \u003ctd\u003eISO 11357 (DSC, 10 °C\/min)\u003c\/td\u003e\n          \u003ctd\u003e222.3 °C\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/table\u003e\n      \u003csmall\u003e*3D Printing: all samples were printed using a new spool of material loaded in an UltiMaker S7 with Material Station with normal intent profiles using 0.15 mm layer height with CC0.6 printcore and 100% infill, using UltiMaker Cura 5.3. Samples were printed ‘one-at-a-time’. Printed samples were conditioned in room temperature for at least 24h before measuring.\u003c\/small\u003e\n    \u003c\/div\u003e\n   \u003c\/details\u003e\n      ","brand":"UGB","offers":[{"title":"Default Title","offer_id":55286337110398,"sku":"1003120018","price":96.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/PETCF-Box-and-Spool-standing_Black.jpg?v=1741354936"},{"product_id":"ultimaker-pet-cf-blue-2-85mm-750g","title":"UltiMaker PET CF Blue | 2.85mm | 750g","description":"\u003cstyle\u003e\n  .table-wrapper {\n    overflow-x: auto;\n  }\n    .space {\n    padding: 1em;\n  }\n  details summary {\n    background: #eeeeee;\n  }\n  details summary:hover {\n    color: #fff !important;\n  }\n   details summary:hover i {\n     filter: invert(100);\n   }\n  \n\n  details[open] summary {\n    color: #fff !important;\n  }\n\n  details[open] i {\n    filter: invert(100);\n  }\n  .rev-row {\n     flex-wrap: wrap-reverse;\n  }\n\u003c\/style\u003e\n\u003cp\u003ePET CF is easier to print than most composites. It is more resistant to moisture and when kept in an UltiMaker Material Station, it should remain dry. Unlike other composite materials, PET CF is also available in multiple colours: black, blue, and gray. PET CF is compatible with UltiMaker support materials (PVA and Breakaway) giving full geometric freedom when designing parts. Finally, parts printed with PET CF can be annealed to improve their temperature resistance from 80 °C to a phenomenal 181 °C, as well as\u003cbr\u003eincreasing their strength by 30% and stiffness by 10%. All of this can be done using the recommended and validated BINDER FP115 programmable oven.\u003c\/p\u003e\n\u003cdiv class=\"table-wrapper\"\u003e\n\u003ctable class=\"table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eApplications\u003c\/th\u003e\n\u003cth\u003eNot Suitable For\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunctional prototyping, tooling, manufacturing aids\u003c\/td\u003e\n\u003ctd\u003eIn vivo parts applications. Applications where the printed parts are exposed to temperatures higher than 76°C or the annealed printed parts are exposed to temperatures higher than 181°C.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch5\u003eTechnnical Specifications\u003c\/h5\u003e\n\u003cdetails name=\"spec\" open\u003e\n\u003csummary\u003eFilament Specifications \u003ci class=\"fa-solid fa-chevron-right\"\u003e\u003c\/i\u003e\u003c\/summary\u003e\n\u003cdiv\u003e\n\u003ctable class=\"table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e2.85mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. roundness deviation\u003c\/th\u003e\n\u003ctd\u003e0.1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNet Filament Weight\u003c\/th\u003e\n\u003ctd\u003e750g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilament Length\u003c\/th\u003e\n\u003ctd\u003e~85m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails name=\"spec\"\u003e\n\u003csummary\u003eColour Information \u003ci class=\"fa-solid fa-chevron-right\"\u003e\u003c\/i\u003e\u003c\/summary\u003e\n\u003cdiv class=\"table-wrapper\"\u003e\n\u003ctable class=\"table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eColours\u003c\/th\u003e\n\u003cth\u003eColour Code\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003eRAL 9017\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlue\u003c\/td\u003e\n\u003ctd\u003eRAL 5009\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGrey\u003c\/td\u003e\n\u003ctd\u003eRAL 7049\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails name=\"spec\"\u003e\n\u003csummary\u003eMechanical Properties \u003ci class=\"fa-solid fa-chevron-right\"\u003e\u003c\/i\u003e\u003c\/summary\u003e\n\u003cdiv class=\"table-wrapper\"\u003e\n\u003ctable class=\"table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003cth\u003eTest Method\u003c\/th\u003e\n\u003cth\u003eTypical value XY (flat)\u003c\/th\u003e\n\u003cth\u003eTypical value YZ (side)\u003c\/th\u003e\n\u003cth\u003eTypical value Z (up)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile (Young's) modulus\u003c\/td\u003e\n\u003ctd\u003eASTM D3039 (1 mm \/ min)\u003c\/td\u003e\n\u003ctd\u003e4342 ± 89 MPa\u003c\/td\u003e\n\u003ctd\u003e8568 ± 130 Mpa\u003c\/td\u003e\n\u003ctd\u003e2230 ± 102 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile stress at yield\u003c\/td\u003e\n\u003ctd\u003eASTM D3039 (5 mm \/ min)\u003c\/td\u003e\n\u003ctd\u003e50.6 ± 0.6 MPa\u003c\/td\u003e\n\u003ctd\u003e75.2 ± 0.8 MPa\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile stress at break\u003c\/td\u003e\n\u003ctd\u003eASTM D3039 (5 mm \/ min)\u003c\/td\u003e\n\u003ctd\u003e49.3 ± 0.6 MPa\u003c\/td\u003e\n\u003ctd\u003e72.3 ± 1.0 MPa\u003c\/td\u003e\n\u003ctd\u003e17.8 ± 1.2 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at yield\u003c\/td\u003e\n\u003ctd\u003eASTM D3039 (5 mm \/ min)\u003c\/td\u003e\n\u003ctd\u003e3.9 ± 0.1%\u003c\/td\u003e\n\u003ctd\u003e3.5 ± 0.1%\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003eASTM D3039 (5 mm \/ min)\u003c\/td\u003e\n\u003ctd\u003e5.5 ± 0.6%\u003c\/td\u003e\n\u003ctd\u003e5.9 ± 1.3%\u003c\/td\u003e\n\u003ctd\u003e1.3 ± 0.1%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural modulus\u003c\/td\u003e\n\u003ctd\u003eISO 178 (1 mm \/ min)\u003c\/td\u003e\n\u003ctd\u003e5743 ± 150 MPa\u003c\/td\u003e\n\u003ctd\u003e7667 ± 90 MPa\u003c\/td\u003e\n\u003ctd\u003e2675 ± 33 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural strength\u003c\/td\u003e\n\u003ctd\u003eISO 178 (5 mm \/ min)\u003c\/td\u003e\n\u003ctd\u003e102.8 ± 2.6 MPa at 4.4% strain\u003c\/td\u003e\n\u003ctd\u003e122.3 ± 2.2 MPa at 4.0% strain\u003c\/td\u003e\n\u003ctd\u003e41.9 ± 3.2 MPa at 1.5% strain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural strain at break\u003c\/td\u003e\n\u003ctd\u003eISO 178 (5 mm \/ min)\u003c\/td\u003e\n\u003ctd\u003eNo break (\u0026gt;10%)\u003c\/td\u003e\n\u003ctd\u003eNo break (\u0026gt; 10%)\u003c\/td\u003e\n\u003ctd\u003e1.5 ± 0.1%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCharpy impact strength (at 23 °C)\u003c\/td\u003e\n\u003ctd\u003eISO 179-1 \/ 1eB (notched)\u003c\/td\u003e\n\u003ctd\u003e8.6 ± 0.5 kJ\/m2\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003eISO 7619-1 (Durometer, Shore D) 76 Shore D\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails name=\"spec\"\u003e\n\u003csummary\u003eMechanical Properties (Annealed) \u003ci class=\"fa-solid fa-chevron-right\"\u003e\u003c\/i\u003e\u003c\/summary\u003e\n\u003cdiv class=\"table-wrapper\"\u003e\n\u003ctable class=\"table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003cth\u003eTest Method\u003c\/th\u003e\n\u003cth\u003eTypical value XY (flat)\u003c\/th\u003e\n\u003cth\u003eTypical value YZ (side)\u003c\/th\u003e\n\u003cth\u003eTypical value Z (up)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile (Young's) modulus\u003c\/td\u003e\n\u003ctd\u003eASTM D3039 (1 mm \/ min)\u003c\/td\u003e\n\u003ctd\u003e5530 ± 124 MPa\u003c\/td\u003e\n\u003ctd\u003e9810 ± 208 MPa\u003c\/td\u003e\n\u003ctd\u003e2655 ± 130 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile stress at yield\u003c\/td\u003e\n\u003ctd\u003eASTM D3039 (5 mm \/ min)\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile stress at break\u003c\/td\u003e\n\u003ctd\u003eASTM D3039 (5 mm \/ min)\u003c\/td\u003e\n\u003ctd\u003e72.8 ± 2.0 MPa\u003c\/td\u003e\n\u003ctd\u003e104 ± 2.0 MPa\u003c\/td\u003e\n\u003ctd\u003e18.2 ± 1.8 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at yield\u003c\/td\u003e\n\u003ctd\u003eASTM D3039 (5 mm \/ min)\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003eASTM D3039 (5 mm \/ min)\u003c\/td\u003e\n\u003ctd\u003e3.4 ± 0.2 %\u003c\/td\u003e\n\u003ctd\u003e3.4 ± 0.2%\u003c\/td\u003e\n\u003ctd\u003e1.0 ± 0.1 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural modulus\u003c\/td\u003e\n\u003ctd\u003eISO 178 (1 mm \/ min)\u003c\/td\u003e\n\u003ctd\u003e6280 ± 114 Mpa\u003c\/td\u003e\n\u003ctd\u003e8691 ± 96 MPa\u003c\/td\u003e\n\u003ctd\u003e2913 ± 58 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural strength\u003c\/td\u003e\n\u003ctd\u003eISO 178 (5 mm \/ min)\u003c\/td\u003e\n\u003ctd\u003e136.6 ± 2.8 MPa at 2.9% strain\u003c\/td\u003e\n\u003ctd\u003e170.4 ± 1.3 MPa at 2.8% strain\u003c\/td\u003e\n\u003ctd\u003e44.3 ± 4.9 MPa at 1.5% strain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural strain at break\u003c\/td\u003e\n\u003ctd\u003eISO 178 (5 mm \/ min)\u003c\/td\u003e\n\u003ctd\u003e3.0 ± 0.1 %\u003c\/td\u003e\n\u003ctd\u003e2.8 ± 0.1 %\u003c\/td\u003e\n\u003ctd\u003e1.5 ± 0.1%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCharpy impact strength (at 23 °C)\u003c\/td\u003e\n\u003ctd\u003eISO 179-1 \/ 1eB (notched)\u003c\/td\u003e\n\u003ctd\u003e5.3 ± 0.9 kJ\/m2\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003eISO 7619-1 (Durometer, Shore D) 81 Shore D\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails name=\"spec\"\u003e\n\u003csummary\u003ePrint Orientation \u003ci class=\"fa-solid fa-chevron-right\"\u003e\u003c\/i\u003e\u003c\/summary\u003e\n\u003cp\u003eAs the FFF process produces part in a layered structure, mechan- ical properties of the part vary depending on orientation of the part. In-plane there are differences between walls (following the contours of the part) and infill (layer of 45° lines). These differences can be seen in the the data for XY (printed flat on the build plate - mostly infill) and YZ (printed on its side - mostly walls). Additionally, the upright samples (Z direction) give information on the strength of the interlayer adhesion of the material. Typically the interlayer strength (Z) has the lowest strength in FFF. Note: All samples are printed with 100% infill\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails name=\"spec\"\u003e\n\u003csummary\u003eTensile Properties \u003ci class=\"fa-solid fa-chevron-right\"\u003e\u003c\/i\u003e\u003c\/summary\u003e\n\u003cp\u003ePrinted parts can yield before they break, where the material is deforming (necking) before it breaks completely. When this is the case, both the yield and break points will be reported. Typical mate- rials that yield before breaking are materials with high toughness like Tough PLA, Nylon and CPE+. If the material simply breaks without yielding, only the break point will be reported. This is the case for brittle materials like PLA and PC Transparant, as well as elastomers (like TPU).\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails name=\"spec\"\u003e\n\u003csummary\u003eThermal Properties \u003ci class=\"fa-solid fa-chevron-right\"\u003e\u003c\/i\u003e\u003c\/summary\u003e\n\u003cdiv class=\"table-wrapper\"\u003e\n\u003ctable class=\"table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003cth\u003eTest Method\u003c\/th\u003e\n\u003cth\u003eTypical Value\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMelt mass-flow rate (MFR)\u003c\/td\u003e\n\u003ctd\u003eISO 1133 (280 °C, 2.16 kg)\u003c\/td\u003e\n\u003ctd\u003e2.6 g \/ 10 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat Deflection(HDT) at 0.455 MPa*\u003c\/td\u003e\n\u003ctd\u003eISO 75-2 \/ B\u003c\/td\u003e\n\u003ctd\u003e76.0 °C (non-annealed) \/ 181.0 °C (annealed)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVicat softening temperature*\u003c\/td\u003e\n\u003ctd\u003eISO 306 \/ A120\u003c\/td\u003e\n\u003ctd\u003e92.0 °C (non-annealed) \/ \u0026gt; 235 °C (annealed)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGlass transition\u003c\/td\u003e\n\u003ctd\u003eISO 11357 (DSC, 10 °C\/min)\u003c\/td\u003e\n\u003ctd\u003e78 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMelting temperature\u003c\/td\u003e\n\u003ctd\u003eISO 11357 (DSC, 10 °C\/min)\u003c\/td\u003e\n\u003ctd\u003e222.3 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003csmall\u003e*3D Printing: all samples were printed using a new spool of material loaded in an UltiMaker S7 with Material Station with normal intent profiles using 0.15 mm layer height with CC0.6 printcore and 100% infill, using UltiMaker Cura 5.3. Samples were printed ‘one-at-a-time’. Printed samples were conditioned in room temperature for at least 24h before measuring.\u003c\/small\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e","brand":"UGB","offers":[{"title":"Default Title","offer_id":55286337143166,"sku":"1003120019","price":96.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/PETCF-Box-and-Spool-standing_Blue.jpg?v=1741597131"},{"product_id":"ultimaker-pet-cf-gray-2-85mm-750g","title":"UltiMaker PET CF Grey | 2.85mm | 750g","description":"\u003cstyle\u003e\n  .table-wrapper {\n    overflow-x: auto;\n  }\n    .space {\n    padding: 1em;\n  }\n  details summary {\n    background: #eeeeee;\n  }\n  details summary:hover {\n    color: #fff !important;\n  }\n   details summary:hover i {\n     filter: invert(100);\n   }\n  \n\n  details[open] summary {\n    color: #fff !important;\n  }\n\n  details[open] i {\n    filter: invert(100);\n  }\n  .rev-row {\n     flex-wrap: wrap-reverse;\n  }\n\u003c\/style\u003e\n\n\u003cp\u003ePET CF is easier to print than most composites. It is more resistant to moisture and when kept in an UltiMaker Material Station, it should remain dry. Unlike other composite materials, PET CF is also available in multiple colours: black, blue, and gray. PET CF is compatible with UltiMaker support materials (PVA and Breakaway) giving full geometric freedom when designing parts. Finally, parts printed with PET CF can be annealed to improve their temperature resistance from 80 °C to a phenomenal 181 °C, as well as\u003cbr\u003eincreasing their strength by 30% and stiffness by 10%. All of this can be done using the recommended and validated BINDER FP115 programmable oven.\u003c\/p\u003e\n\n    \u003cdiv class=\"table-wrapper\"\u003e\n      \u003ctable class=\"table\"\u003e\n        \u003ctr\u003e\n          \u003cth\u003eApplications\u003c\/th\u003e\n          \u003cth\u003eNot Suitable For\u003c\/th\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eFunctional prototyping, tooling, manufacturing aids\u003c\/td\u003e\n          \u003ctd\u003e\n            In vivo parts applications. Applications where the printed parts are\n            exposed to temperatures higher than 76°C or the annealed printed\n            parts are exposed to temperatures higher than 181°C.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/table\u003e\n    \u003c\/div\u003e\n\n\u003ch5\u003eTechnnical Specifications\u003c\/h5\u003e\n  \u003cdetails name=\"spec\" open\u003e\n      \u003csummary\u003e\n        Filament Specifications \u003ci class=\"fa-solid fa-chevron-right\"\u003e\u003c\/i\u003e\n      \u003c\/summary\u003e\n    \u003cdiv classs=\"table-wrapper\"\u003e\n          \u003ctable class=\"table\"\u003e\n      \u003ctr\u003e\n        \u003cth\u003eDiameter\u003c\/th\u003e\n        \u003ctd\u003e2.85mm\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003cth\u003eMax. roundness deviation\u003c\/th\u003e\n        \u003ctd\u003e0.1mm\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003cth\u003eNet Filament Weight\u003c\/th\u003e\n        \u003ctd\u003e750g\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003cth\u003eFilament Length\u003c\/th\u003e\n        \u003ctd\u003e~85m\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/table\u003e\n    \u003c\/div\u003e\n  \u003c\/details\u003e\n    \u003cdetails name=\"spec\"\u003e\n      \u003csummary\u003e\n        Colour Information \u003ci class=\"fa-solid fa-chevron-right\"\u003e\u003c\/i\u003e\n      \u003c\/summary\u003e\n          \u003cdiv class=\"table-wrapper\"\u003e\n      \u003ctable class=\"table\"\u003e\n        \u003ctr\u003e\n          \u003cth\u003eColours\u003c\/th\u003e\n          \u003cth\u003eColour Code\u003c\/th\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eBlack\u003c\/td\u003e\n          \u003ctd\u003eRAL 9017\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eBlue\u003c\/td\u003e\n          \u003ctd\u003eRAL 5009\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eGrey\u003c\/td\u003e\n          \u003ctd\u003eRAL 7049\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/table\u003e\n    \u003c\/div\u003e\n    \u003c\/details\u003e\n        \u003cdetails name=\"spec\"\u003e\n      \u003csummary\u003e\n        Mechanical Properties \u003ci class=\"fa-solid fa-chevron-right\"\u003e\u003c\/i\u003e\n      \u003c\/summary\u003e\n            \u003cdiv class=\"table-wrapper\"\u003e\n      \u003ctable class=\"table\"\u003e\n        \u003ctr\u003e\n          \u003cth\u003e\u003c\/th\u003e\n          \u003cth\u003eTest Method\u003c\/th\u003e\n          \u003cth\u003eTypical value XY (flat)\u003c\/th\u003e\n          \u003cth\u003eTypical value YZ (side)\u003c\/th\u003e\n          \u003cth\u003eTypical value Z (up)\u003c\/th\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eTensile (Young's) modulus\u003c\/td\u003e\n          \u003ctd\u003eASTM D3039 (1 mm \/ min)\u003c\/td\u003e\n          \u003ctd\u003e4342 ± 89 MPa\u003c\/td\u003e\n          \u003ctd\u003e8568 ± 130 Mpa\u003c\/td\u003e\n          \u003ctd\u003e2230 ± 102 MPa\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eTensile stress at yield\u003c\/td\u003e\n          \u003ctd\u003eASTM D3039 (5 mm \/ min)\u003c\/td\u003e\n          \u003ctd\u003e50.6 ± 0.6 MPa\u003c\/td\u003e\n          \u003ctd\u003e75.2 ± 0.8 MPa\u003c\/td\u003e\n          \u003ctd\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eTensile stress at break\u003c\/td\u003e\n          \u003ctd\u003eASTM D3039 (5 mm \/ min)\u003c\/td\u003e\n          \u003ctd\u003e49.3 ± 0.6 MPa\u003c\/td\u003e\n          \u003ctd\u003e72.3 ± 1.0 MPa\u003c\/td\u003e\n          \u003ctd\u003e17.8 ± 1.2 MPa\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eElongation at yield\u003c\/td\u003e\n          \u003ctd\u003eASTM D3039 (5 mm \/ min)\u003c\/td\u003e\n          \u003ctd\u003e3.9 ± 0.1%\u003c\/td\u003e\n          \u003ctd\u003e3.5 ± 0.1%\u003c\/td\u003e\n          \u003ctd\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eElongation at break\u003c\/td\u003e\n          \u003ctd\u003eASTM D3039 (5 mm \/ min)\u003c\/td\u003e\n          \u003ctd\u003e5.5 ± 0.6%\u003c\/td\u003e\n          \u003ctd\u003e5.9 ± 1.3%\u003c\/td\u003e\n          \u003ctd\u003e1.3 ± 0.1%\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eFlexural modulus\u003c\/td\u003e\n          \u003ctd\u003eISO 178 (1 mm \/ min)\u003c\/td\u003e\n          \u003ctd\u003e5743 ± 150 MPa\u003c\/td\u003e\n          \u003ctd\u003e7667 ± 90 MPa\u003c\/td\u003e\n          \u003ctd\u003e2675 ± 33 MPa\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eFlexural strength\u003c\/td\u003e\n          \u003ctd\u003eISO 178 (5 mm \/ min)\u003c\/td\u003e\n          \u003ctd\u003e102.8 ± 2.6 MPa at 4.4% strain\u003c\/td\u003e\n          \u003ctd\u003e122.3 ± 2.2 MPa at 4.0% strain\u003c\/td\u003e\n          \u003ctd\u003e41.9 ± 3.2 MPa at 1.5% strain\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eFlexural strain at break\u003c\/td\u003e\n            \u003ctd\u003eISO 178 (5 mm \/ min)\u003c\/td\u003e\n            \u003ctd\u003eNo break (\u0026gt;10%)\u003c\/td\u003e\n            \u003ctd\u003eNo break (\u0026gt; 10%)\u003c\/td\u003e\n            \u003ctd\u003e1.5 ± 0.1%\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eCharpy impact strength (at 23 °C)\u003c\/td\u003e\n            \u003ctd\u003eISO 179-1 \/ 1eB (notched)\u003c\/td\u003e\n            \u003ctd\u003e8.6 ± 0.5 kJ\/m2\u003c\/td\u003e\n            \u003ctd\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eHardness\u003c\/td\u003e\n            \u003ctd\u003eISO 7619-1 (Durometer, Shore D) 76 Shore D\u003c\/td\u003e\n            \u003ctd\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003c\/td\u003e\n            \u003ctd\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/table\u003e\n    \u003c\/div\u003e\n        \u003c\/details\u003e\n    \u003cdetails name=\"spec\"\u003e\n      \u003csummary\u003e\n        Mechanical Properties (Annealed) \u003ci class=\"fa-solid fa-chevron-right\"\u003e\u003c\/i\u003e\n      \u003c\/summary\u003e\n          \u003cdiv class=\"table-wrapper\"\u003e\n      \u003ctable class=\"table\"\u003e\n        \u003ctr\u003e\n          \u003cth\u003e\u003c\/th\u003e\n          \u003cth\u003eTest Method\u003c\/th\u003e\n          \u003cth\u003eTypical value XY (flat)\u003c\/th\u003e\n          \u003cth\u003eTypical value YZ (side)\u003c\/th\u003e\n          \u003cth\u003eTypical value Z (up)\u003c\/th\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eTensile (Young's) modulus\u003c\/td\u003e\n          \u003ctd\u003eASTM D3039 (1 mm \/ min)\u003c\/td\u003e\n          \u003ctd\u003e5530 ± 124 MPa\u003c\/td\u003e\n          \u003ctd\u003e9810 ± 208 MPa\u003c\/td\u003e\n          \u003ctd\u003e2655 ± 130 MPa\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eTensile stress at yield\u003c\/td\u003e\n          \u003ctd\u003eASTM D3039 (5 mm \/ min)\u003c\/td\u003e\n          \u003ctd\u003e\u003c\/td\u003e\n          \u003ctd\u003e\u003c\/td\u003e\n          \u003ctd\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eTensile stress at break\u003c\/td\u003e\n          \u003ctd\u003eASTM D3039 (5 mm \/ min)\u003c\/td\u003e\n          \u003ctd\u003e72.8 ± 2.0 MPa\u003c\/td\u003e\n          \u003ctd\u003e104 ± 2.0 MPa\u003c\/td\u003e\n          \u003ctd\u003e18.2 ± 1.8 MPa\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eElongation at yield\u003c\/td\u003e\n          \u003ctd\u003eASTM D3039 (5 mm \/ min)\u003c\/td\u003e\n          \u003ctd\u003e\u003c\/td\u003e\n          \u003ctd\u003e\u003c\/td\u003e\n          \u003ctd\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eElongation at break\u003c\/td\u003e\n          \u003ctd\u003eASTM D3039 (5 mm \/ min)\u003c\/td\u003e\n          \u003ctd\u003e3.4 ± 0.2 %\u003c\/td\u003e\n          \u003ctd\u003e3.4 ± 0.2%\u003c\/td\u003e\n          \u003ctd\u003e1.0 ± 0.1 %\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eFlexural modulus\u003c\/td\u003e\n          \u003ctd\u003eISO 178 (1 mm \/ min)\u003c\/td\u003e\n          \u003ctd\u003e6280 ± 114 Mpa\u003c\/td\u003e\n          \u003ctd\u003e8691 ± 96 MPa\u003c\/td\u003e\n          \u003ctd\u003e2913 ± 58 MPa\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eFlexural strength\u003c\/td\u003e\n          \u003ctd\u003eISO 178 (5 mm \/ min)\u003c\/td\u003e\n          \u003ctd\u003e136.6 ± 2.8 MPa at 2.9% strain\u003c\/td\u003e\n          \u003ctd\u003e170.4 ± 1.3 MPa at 2.8% strain\u003c\/td\u003e\n          \u003ctd\u003e44.3 ± 4.9 MPa at 1.5% strain\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eFlexural strain at break\u003c\/td\u003e\n          \u003ctd\u003eISO 178 (5 mm \/ min)\u003c\/td\u003e\n          \u003ctd\u003e3.0 ± 0.1 %\u003c\/td\u003e\n          \u003ctd\u003e2.8 ± 0.1 %\u003c\/td\u003e\n          \u003ctd\u003e1.5 ± 0.1%\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eCharpy impact strength (at 23 °C)\u003c\/td\u003e\n          \u003ctd\u003eISO 179-1 \/ 1eB (notched)\u003c\/td\u003e\n          \u003ctd\u003e5.3 ± 0.9 kJ\/m2\u003c\/td\u003e\n          \u003ctd\u003e\u003c\/td\u003e\n          \u003ctd\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eHardness\u003c\/td\u003e\n          \u003ctd\u003eISO 7619-1 (Durometer, Shore D) 81 Shore D\u003c\/td\u003e\n          \u003ctd\u003e\u003c\/td\u003e\n          \u003ctd\u003e\u003c\/td\u003e\n          \u003ctd\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/table\u003e\n    \u003c\/div\u003e\n    \u003c\/details\u003e\n    \u003cdetails name=\"spec\"\u003e\n      \u003csummary\u003e\n        Print Orientation \u003ci class=\"fa-solid fa-chevron-right\"\u003e\u003c\/i\u003e\n      \u003c\/summary\u003e\n      \u003cp\u003eAs the FFF process produces part in a layered structure, mechan-\nical properties of the part vary depending on orientation of the part.\n\nIn-plane there are differences between walls (following the contours\nof the part) and infill (layer of 45° lines). These differences can be\nseen in the the data for XY (printed flat on the build plate - mostly\ninfill) and YZ (printed on its side - mostly walls). Additionally, the\nupright samples (Z direction) give information on the strength of the\ninterlayer adhesion of the material. Typically the interlayer strength\n(Z) has the lowest strength in FFF. Note: All samples are printed with\n100% infill\nof infill and walls in a printed part.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails name=\"spec\"\u003e\n      \u003csummary\u003e\n        Tensile Properties \u003ci class=\"fa-solid fa-chevron-right\"\u003e\u003c\/i\u003e\n      \u003c\/summary\u003e\n      \u003cp\u003ePrinted parts can yield before they break, where the material is\ndeforming (necking) before it breaks completely. When this is the\n\ncase, both the yield and break points will be reported. Typical mate-\nrials that yield before breaking are materials with high toughness like\n\nTough PLA, Nylon and CPE+. If the material simply breaks without\nyielding, only the break point will be reported. This is the case for\nbrittle materials like PLA and PC Transparant, as well as elastomers\n(like TPU).\u003c\/p\u003e\n    \u003c\/details\u003e\n   \u003cdetails name=\"spec\"\u003e\n      \u003csummary\u003e\n        Thermal Properties \u003ci class=\"fa-solid fa-chevron-right\"\u003e\u003c\/i\u003e\n      \u003c\/summary\u003e\n         \u003cdiv class=\"table-wrapper\"\u003e\n      \u003ctable class=\"table\"\u003e\n        \u003ctr\u003e\n          \u003cth\u003e\u003c\/th\u003e\n          \u003cth\u003eTest Method\u003c\/th\u003e\n          \u003cth\u003eTypical Value\u003c\/th\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMelt mass-flow rate (MFR)\u003c\/td\u003e\n          \u003ctd\u003eISO 1133 (280 °C, 2.16 kg)\u003c\/td\u003e\n          \u003ctd\u003e2.6 g \/ 10 min\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eHeat Deflection(HDT) at 0.455 MPa*\u003c\/td\u003e\n          \u003ctd\u003eISO 75-2 \/ B\u003c\/td\u003e\n          \u003ctd\u003e76.0 °C (non-annealed) \/ 181.0 °C (annealed)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eVicat softening temperature*\u003c\/td\u003e\n          \u003ctd\u003eISO 306 \/ A120\u003c\/td\u003e\n          \u003ctd\u003e92.0 °C (non-annealed) \/ \u0026gt; 235 °C (annealed)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eGlass transition\u003c\/td\u003e\n          \u003ctd\u003eISO 11357 (DSC, 10 °C\/min)\u003c\/td\u003e\n          \u003ctd\u003e78 °C\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMelting temperature\u003c\/td\u003e\n          \u003ctd\u003eISO 11357 (DSC, 10 °C\/min)\u003c\/td\u003e\n          \u003ctd\u003e222.3 °C\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/table\u003e\n      \u003csmall\u003e*3D Printing: all samples were printed using a new spool of material loaded in an UltiMaker S7 with Material Station with normal intent profiles using 0.15 mm layer height with CC0.6 printcore and 100% infill, using UltiMaker Cura 5.3. Samples were printed ‘one-at-a-time’. Printed samples were conditioned in room temperature for at least 24h before measuring.\u003c\/small\u003e\n    \u003c\/div\u003e\n   \u003c\/details\u003e","brand":"3DGBIRE Ltd","offers":[{"title":"Default Title","offer_id":55286337175934,"sku":"1003120020","price":96.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/4369\/files\/PETCF-Box-only-Black_e07ee53a-8eba-4177-b65b-aab81985f733.jpg?v=1741597673"}],"url":"https:\/\/3dgbire.com\/collections\/pet\/rpetg.oembed","provider":"3DGBIRE Ltd","version":"1.0","type":"link"}