Our New 3D Printing Service is Now Available!Go to 3D AMPS

Save 10%

Was £4,198.80  £3,778.80 inc VAT
Was £3,499.00  £3,149.00 exc VAT
Preserve the properties or your materials. Our hybrid drying technology dries your filament and preserves its properties, ensuring your material is in its best conditions to be printed.

Pre-order in March

Ships in April

Call or email our dedicated Business Solutions Team to preorder.

01257 228411 or send an email to sales@3dgbire.com

Smart3D Multimaterial Dryer

Low moisture for high performance

Enquire Now

Features summary

There is certain amount of water (moisture) in the ambient air. It can vary depending on the place, but there is always, at least a small percentage of water in the atmosphere.

This factor is now increasingly becoming a serious problem for 3D printing. It’s the source of a lot of issues like degradation or fragility.

All filaments absorb water but, some of them, such as Nylon, PVA or TPU (Flex) are prone to absorb moisture more easily than others. As a major rule, if you leave a filament “unprotected” for some time, it becomes worse to print with.

Preserve the properties or your materials

Our hybrid drying technology dries your filament and preserves its properties, ensuring your material is in its best conditions to be printed.

Dry over 10 times faster

This system allows the filaments to be dried much faster than any other current solution on the market. In less than 2 hours, you can have the Dryer’s full storage capacity in perfect conditions and ready to use.

Dry up to 30 spools

Unlike other drying solutions on the market, the Smart3D Material Dryer can dry and store large 2.2kg spools, or up to 30 1kg spools, depending on spool size.

Store your dry filament

The drying chamber also works to keep your filament dry. The controlled ambient chamber keeps the moisture out, so after drying your materials, you can keep them inside until use.

Achieve perfectly dry filament

Our technology ensures that your previously humid filament will achieve its optimal dryness level.

Technical specifications

Product dimensions (W x D x H) 892 x 500 x 825mm
35.1 x 19.7 x 32.5inches
Internal storage capacity (W x D x H) 733 x 250 x 506mm
28.9 x 9.8 x 19.9inches
Maximum spool diameter 500 mm (19.7inches)
Cycle duration <2h
Drying capacity Up to 30 spools (depending on spool size)
Compatibility Filament spools of any material and brand
Connectivity Ethernet, USB
Display 7” full color touch screen
Rated voltage 110 - 240V / 50 - 60 Hz
Auxiliar power outlet 110 - 240V / 50 - 60 Hz / 4 - 2A
Spool recognition Through RFID tag
Reports and statistics Temperature, humidity and drying cycles
Updates via Ethernet
I4.0 compliant Yes


View all filaments


How can keeping your spools dry help?

These are a few indications of possible moisture content in your failed prints:

  • Filament cracks or popping noise as filament is pushed through extruder
  • Holes in the top of parts
  • Extruder tip bubbles with a burst of steam, stringy or drooly
  • Bad adhesion to bed
  • Repeated prints are inconsistent or fail with no change in parameters
  • Extruder motor stops but filament keeps coming out
  • Parts become soft, fragile, and break easily
  • Extruder jams

Why is humidity a silent killer for my 3D prints?

Precise control over the material’s mass flow rate is directly correlated with the moisture control of printed material. Moisture will lead to hydrolysis, breaking the polymer chains. In addition, while filament is melted in the hotend, moisture turns into vapor inside the hotend’s melting chamber, generating pressure. This pressure needs to be released, release that depends on the material’s viscosity. The result may be a back pressure jam or flow variations in the extrusion.

Printing failures due to moisture in the filament

Review Section


3D Printers and Accessories

As one of the largest 3D printing distributor in the UK & Ireland we sell some of the most advanced printers from leading industry manufactures. Not only printers we also supply cleaning kits, filaments etc…

Buy Now

Spare parts

We stock all spare parts and pieces for Ultimaker and Photoscentric 3D Printers. If there is a part or piece you can not find on our website, contact us and we most likely have it in stock...

Buy Now


Our courses are designed to take you from complete novice to an expert user of 3D Printers, 3D Scanners, Software and materials. Being able to install, operate and solve technical issues without the need for a technician...

Click Here


Whatever your problem maybe we can are always ready to help we have a dedicated support team to help you install, print and keep your machine in top tip shape…

Contact Us
Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page